Abstract:A new strategy to reduce the operating temperature of the solid oxide fuel cell (SOFC) is needed to foster the progress of developing high-performance and stable SOFC as a solution to the thermal stress and degradation of the cell components induced by high-temperature SOFC. The use of lithium (Li) as a cathode can increase the cell's efficiency, as it allows for faster ion transport and a higher reaction rate. This study presents an attractive approach to using a Li-based cathode by combining Li with cobalt (Co) to form LiCo0.6Sr0.4O2 (LCSO). In this work, a precursor consisting of Li, Co, and strontium (Sr) was prepared via the glycine-nitrate combustion method. The precursor was calcined at two different calcination temperatures (800 and 900 °C) prior to ink formulation and symmetrical cell fabrication in order to study the effect of calcination temperature on the structural and electrochemical behaviour of a Li-based cathode. The precursor LCSO powder was characterised using X-ray crystallography (XRD) to determine the crystal structure and composition of the developed LCSO. The electrochemical performance of the fabricated symmetrical cell was tested using electrochemical impedance spectroscopy (EIS) to obtain the cell's resistance information, which is related to the cell's ionic and electronic conductivity. SDC electrolyte with LCSO calcined at 800 °C has a higher crystallinity percentage and a more porous structure compared to LCSO calcined at 900 °C. The porous structure enhanced the electrochemical performance of the cell, where the symmetrical cell has the highest conductivity (0.038 Scm−1) with the lowest activation energy (0.43 eV). The symmetrical cell was also able to achieve 2.89 Ω cm2 of area-specific resistance (ASR) at 800 °C of operating temperature. In conclusion, the SDC electrolyte with LCSO calcined at 800 °C is the promising cathode material for SOFC applications. The result of this study can benefit the SOFC field of research, especially in the development of intermediate temperature-SOFC.

Physical and chemical properties of LSCF-CuO as potential cathode for intermediate temperature solid oxide fuel cell (IT-SOFC)

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Effect of Calcination Temperature on the Structural and Electrochemical Behaviour of Li-Based Cathode for Intermediate-Temperature SOFC Application

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Synthesis and characterization of fibrous La0.8Sr0.2Fe1-xCuxO3-δ cathode for intermediate-temperature solid oxide fuel cells

Synthesis and Characterization of Strontium-Doped Lanthanum Cobaltite Cathode Material Prepared by a Modified Combined Complexing Method

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

A Review on the Process-Structure-Performance of Lanthanum Strontium Cobalt Ferrite Oxide for Solid Oxide Fuel Cells Cathodes

Fabrication and performance analysis of A-site metal-promoted La0.595V0.005Sr0.4CoO3−∂ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

Improving the Stability of La0.6Sr0.4Co0.2Fe0.8O3-δ Electrode for Solid Oxide Fuel Cells by Introducing Sintering Inhibitors

Carbonate-Based Lanthanum Strontium Cobalt Ferrite (LSCF)–Samarium-Doped Ceria (SDC) Composite Cathode for Low-Temperature Solid Oxide Fuel Cells

Investigation of structural, electrical and electrochemical properties of La0.6Sr0.4Fe0.8Mn0.2O3-δ as an intermediate temperature solid oxide fuel cell cathode

Effect of processing route on the properties of LSCF-based composite cathode for IT-SOFC

Validation and Electrochemical Characterization of LSCF Cathode Deposition on Metal Supported SOFC

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Synthesis and Ionic Conductivity of Lanthanum-based Ceria Ce1−xLaxO2−δ Electrolytes for Solid Oxide Fuel Cell Applications

Electrochemical Characterization of LaBaCuCoO5+δ–Sm0.2Ce0.8O1.9 Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Facile wet-chemical synthesis and evaluation of physico-chemical characteristics of novel nanocrystalline NdCoO3-based perovskite oxide as cathode for LT-SOFC applications

Enhancing ORR Catalytic Activity and Electrochemical Investigation of La1−2xBaxBixFeO3 Cathode for Low-Temperature Solid Oxide Fuel Cell

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC