Abstract:Hydroforming (HF) is a traditional sheet metal forming method with high forming efficiency and reliability. However, under HF, the material at room temperature is easy to crack due to the low strain rate. Electromagnetic hydraulic forming (EMHF) is a high-speed forming process, which can significantly improve the forming limit of materials. Nevertheless, there is a lack of research on the performance and microstructure of parts deformed under EMHF. In this paper, AA5052 sheets are formed into flat bottom parts under the HF and EMHF processes. The tensile properties and hardness of the deformed parts are tested. The yield strength and tensile strength of the EMHF samples were higher by 7.5% and 9.0%, respectively, compared to those of the HF samples. Transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) showed that the EMHF samples had higher internal dislocation density, smaller grain size, higher proportion of small-angle grain boundaries, and higher texture intensity compared to those of the HF samples. This corresponds to the higher strength and hardness observations. Finite element models of the EMHF and HF configurations were developed. The deformation velocity of the EMHF sample exceeded 200 m/s and the strain rate exceeded 600 s−1, while the maximum local liquid pressure reached 211 MPa. The comparison of the thickness distribution obtained by simulation and experimentally indicated that the simulation results were in good agreement with the experimental ones. Moreover, the reasons for the improvement of strength and hardness are discussed, and the strength evolution mechanism is elaborated.

Evaluation of formability enhancement of aluminum alloy sheet in electrohydraulic forming process with free-bulge die

Experiments on Electrohydraulic Forming and Electromagnetic Forming of Aluminum Tube

Manufacture of complex shape parts by high-speed electromagnetic hydraulic forming method

Microstructure and mechanical properties of AA5052 after electromagnetic hydraulic forming

A novel method to evaluate the high strain rate formability of sheet metals under impact hydroforming

Experimental Observations of Quasi-Static-Dynamic Formability in Biaxially Strained Aa5052-O

Improved forming capability of 7075 aluminum alloy using electrically assisted electromagnetic forming

Quasi-static-dynamic Formability of AA5052-O Sheet under Uniaxial and Plane-Strain Tension

Experimental Investigation on Forming Limits of AA5052 Sheet in Hybrid Quasi-Static/dynamic Plane-Strain Tensile Process

Formability Analysis of Electrically Assisted Double-Side Multi-Point Incremental Sheet Forming

Research on formability of 5052 aluminum alloy sheet in a quasi-static–dynamic tensile process

Numerical Study on Electromagnetic Hydraulic Forming Process to Overcome Limitations of Electromagnetic Forming Process

Numerical Simulation and Experimental Results of Radial Lorentz Force Assisted Electro-Hydraulic Sheet Forming Process

Modeling of constitutive behavior and ductile fracture of AA5A06 aluminum alloy sheet in warm hydroforming process

Evaluation of the formability of AA2198-T3 Al-Li alloy in warm sheet hydroforming

Construction of 6061-T6 aluminum alloy constitutive model based on hot bulging test and study on the non-isothermal hydroforming process

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Fracture behavior of 7075-T6 aluminum alloy under electromagnetic forming and traditional stamping

Experimental Observations of 5A02 Aluminum Alloy in Electromagnetically Assisted Tube Hydroforming

Comparative study on deformation behavior, microstructure evolution and post-forming property of an Al Zn Mg Cu alloy in a novel warm forming process

Microstructure evolution of aluminum alloy under quasi-static, mechanical dynamic, and electromagnetic dynamic deformation