Abstract:As a type of hydraulic rotary actuator, a helical hydraulic rotary actuator exhibits a large angle, high torque, and compact structure; hence, it has been widely used in various fields. However, its core technology is proprietary to several companies and thus has not been disclosed. Furthermore, the relevant reports are primarily limited to the component level. The dynamic characteristics of the output when a helical rotary actuator is applied to a closed-loop system are investigated from the perspective of driving system design. Two main aspects are considered: one is to establish a reliable mathematical model and the other is to consider the effect of system parameter perturbation on the output. In this study, a detailed mechanical analysis of a helical rotary hydraulic cylinder is first performed, factors such as friction and load are considered, and an accurate dynamic model of the actuator is established. Subsequently, considering the nonlinear characteristics of pressure flow and the dynamic characteristics of the valve, a dynamic model of a valve-controlled helical rotary actuator angle closed-loop system is described based on sixth-order nonlinear state equations, which has never been reported previously. After deriving the system model, a sensitivity analysis of 23 main parameters in the model with a perturbation of 10% is performed under nine operating conditions. Finally, the system dynamics model and sensitivity analysis results are verified via a prototype experiment and co-simulation, which demonstrate the reliability of the theoretical results obtained in this study. The results provide an accurate mathematical model and analysis basis for the structural optimization or control compensation of similar systems.

Development of a magnetostrictive material–based electro-hydrostatic actuator with an active rotary rectifying valve

Development of a dual magnetostrictive material rods–based electro-hydrostatic actuator

Optimization Design of Giant Magnetostrictive Micro High-Speed Valve Actuator

Development of Vibratory Stress Relief Actuators Based on Giant Magnetostrictive Materials

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Development of an Ε-Type Actuator for Enhancing High-Speed Electro-Pneumatic Ejector Valve Performance

Characteristic investigations on magnetic field and fluid field of a giant magnetostrictive material-based electro-hydrostatic actuator

Sliding Mode Based Controller for Magnetostrictive Actuator

Research on position control of bidirectional dual magnetostrictive rods-based electro-hydrostatic actuator with active rotary valve

Low Power Linear Actuator for Direct Drive Electrohydraulic Valves

Effects of Splined Shaft Bending Rigidity on Cylinder Tilt Behaviour for High-Speed Electro-Hydrostatic Actuator Pumps

Novel Bidirectional Rotary Proportional Actuator for Electrohydraulic Rotary Valves

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Development of a large flow electro-hydrostatic actuator equipped with four magnetostrictive-actuated pumps

Novel Bidirectional Linear Actuator for Electrohydraulic Valves

Modeling and Performance Analysis of a Magnetorheological Fluid Actuation System

Dynamic Model of Giant Magnetostrictive Actuator Considering Excess Eddy Current Loss

A Comprehensive Dynamic Model for Magnetostrictive Actuators Considering Different Input Frequencies with Mechanical Loads

Dynamic Modelling of Magnetostrictive Actuator with Fully Coupled Magneto-Mechanical Effects and Various Eddy-Current Losses