The effect of grain boundary water on deformation mechanisms and rheology of rocksalt during long-term deformation

J.L. Urai,C.J. Spiers
DOI: https://doi.org/10.1201/9781315106502-17
2017-12-14
Abstract:Reliable modeling of the deformation of rocksalt under the very low strain rates characterizing long term engineering conditions or natural halokinesis requires extrapolation of experimentally-derived flow laws to rates much lower than those attainable in the laboratory. This extrapolation must be based on an understanding of the microscale deformation mechanisms operating under these conditions, from studies of natural laboratories. The engineering creep laws generally used in the salt mining industry are based on dislocation creep processes quantified in laboratory experiments of necessarily limited duration. However, a large body of evidence clearly demonstrates that under conditions of long-term deformation, grain boundary dissolution-precipitation processes, such as solution-precipitation creep (or “pressure solution”) and dynamic recrystallization, play a significant role. In this contribution, we briefly review the microphysics of grain boundary water related, solution-precipitation processes in halite, together with the flow behaviour associated with these processes, and we discuss the contribution of these mechanisms to the strain rate during long-term creep. This chapter reviews the microphysics of grain boundary water related, solution-precipitation processes in halite, together with the flow behaviour associated with these processes. The rheology of a given crystalline material depends on the dominant deformation mechanism, which in turn depends on the time scale and hence deformation rate of interest. Reliable modeling of the deformation of rocksalt under the very low strain rates characterizing long term engineering conditions or natural halokinesis requires extrapolation of experimentally-derived flow laws to rates much lower than those attainable in the laboratory. However, a large body of evidence clearly demonstrates that under conditions of long-term deformation, grain boundary dissolution-precipitation processes, such as solution-precipitation creep and dynamic recrystallization, play a significant role. Deformation experiments, performed in the dislocation creep field at confining pressures high enough to suppress dilatancy, have shown that "wet" samples containing more than 10–20 ppm of water at grain boundaries undergo rapid dynamic recrystallization by fluid assisted grain boundary migration, alongside dislocation creep.
What problem does this paper attempt to address?