Abstract:The purpose of the research is to optimize the process of preparing fish oil microcapsules by jet cavitation by using soy protein isolate as the wall material. The effect of wall material addition, emulsifier addition, core material addition and jet cavitation treatment time on emulsion stability and fish oil microcapsule embedding rate was studied by spray drying method. The response surface test was used to analyze various factors to obtain the most. The preparation process of the microcapsules was carried out, and the structure, physical and chemical properties and stability of the prepared microcapsule products were compared with those of the commercially available products. The feasibility of jet cavitation technology in the manufacturing process of microcapsules is discussed, which provides a preliminary theoretical basis for the application of jet cavitation technology in food. The results showed that the emulsion obtained under the conditions of 3.21% of wall material, 0.21% of emulsifier added, 19.70% of core material and 11.25 min of jet cavitation treatment time had better stability, and the embedding rate of fish oil microcapsules reached 94.14%; compared with commercially available fish oil microcapsules, the embedding rate increased by 4.91%. The microcapsule product has spherical microstructure, no cracks, pores and cracks, dense structure, fullness and fullness, and complete particle morphology, which basically achieves the intended purpose of embedding. The microcapsule product has a small particle size, a normal distribution and a narrow region. This indicates that the microcapsules have a uniform particle size distribution, and the particle size is small, the surface oil content is lowered, the embedding rate is increased, and the embedding effect is good. The angle of repose of the microcapsule powder was determined to be 40.39°, which was 9.37° lower than that of the commercially available microcapsules, and the smaller the angle of repose of the powder product, the smaller the frictional force and the better the fluidity. The microcapsule powder was measured to have a moisture content of 3.07% and a solubility of 96.30%, and the solubility was good. The results of differential scanning calorimetry show that the microcapsules have a high thermal dissolution temperature and can be used for storage at room temperature. This may be because the microcapsule particles in this study are spherical and dense in structure. The instantaneous high temperature during spray drying rapidly evaporates the water in the emulsion and hardens the surface. Therefore, the temperature and energy required for the phase transition of the sample are higher, and the thermal stability is better. The accelerated storage test of the fish oil after embedding showed that microencapsulation can improve the oxidative stability of fish oil. This is due to the dense and void-free structure of the microcapsule product in this study. The surface oil content is low, and the wall material is good for embedding fish oil, which hinders the influence of external conditions on fish oil and isolates oxygen, thus slowing down the oxidation rate, thermal stability can be better. Therefore, it can effectively delay the oxidative deterioration of fish oil microcapsules during storage and prolong the shelf life.

Development of fish oil microcapsules by spray drying using mesquite gum and chitosan as wall materials: physicochemical properties, microstructure, and lipid hydroperoxide concentration

Impact of Wall Materials on Physicochemical Properties of Microencapsulated Fish Oil by Spray Drying

Physical Properties of Fish Oil Microcapsules Prepared with Octenyl Succinic Anhydride–Linked Starch and Maltodextrin

Influence of Encapsulation Techniques on the Structure, Physical Properties, and Thermal Stability of Fish Oil Microcapsules by Spray Drying

Properties and Stability of Spray-Dried and Freeze-Dried Microcapsules Co-Encapsulated with Fish Oil, Phytosterol Esters, and Limonene

Development of chitosan based microencapsulated spray dried powder of tuna fish oil: oil load impact and oxidative stability

Optimization of Microencapsulation of Fish Oil with Gum Arabic/Casein/Beta-Cyclodextrin Mixtures by Spray Drying

Impact of chitosan and oregano extract on the physicochemical properties of microencapsulated fish oil stored at different temperature

Influence of spray-drying conditions on microencapsulation of fish oil and chia oil

Menhaden Fish Oil Encapsulation by Spray Drying Process: Influence of Different Biopolymer Materials, Inlet Air Temperature and Emulsion Ratios

Process optimization and physicochemical properties of fish oil microcapsules prepared by jet cavitation

Optimization of the production of double-shell microparticles containing fish oil

Storage Stability and In-Vitro Release Behavior of Microcapsules Incorporating Fish Oil by Spray Drying

Optimized spray-dried conditions' impact on fatty acid profiles and estimation of in vitro digestion of spray-dried chia/fish oil microcapsules

Suitability of Using Monolayered and Multilayered Emulsions for Microencapsulation of ω-3 Fatty Acids by Spray Drying: Effect of Storage at Different Temperatures

Fish oil encapsulated in soy protein particles by lyophilization. Effect of drying process

Comparative Study on the Oxidative Stability of Encapsulated Fish Oil by Monoaxial or Coaxial Electrospraying and Spray-Drying

Microencapsulation of Fish Oil Using Thiol-Modified Β-Lactoglobulin Fibrils/chitosan Complex: A Study on the Storage Stability and in Vitro Release

Omega-3 Fatty Acid Retention and Oxidative Stability of Spray-Dried Chia–Fish-Oil-Prepared Microcapsules

Optimization of preparation of self-emulsified fish oil microcapsule by spray drying

Nanocomposite systems based on soy proteins and cellulose nanocrystals to encapsulate fish oil by emulsification and spray-drying