Abstract:This study presents an adaptive algorithm for distance relays. In this algorithm, the network connected to the transmission line terminals are modelled using an equivalent circuit, and the impedances of this equivalent circuit are estimated. By employing this algorithm, relay errors (over/under reach) caused by changes in network structure, the presence of fault resistance, and injected current from the remote end of the transmission line are eliminated. As a result, the relay accurately determines fault location and fault resistance, enhancing the performance of its Zone1 and Zone2 functions. Faults in power systems occur for various reasons, such as aging or natural disasters. Detecting, locating, and promptly clearing these faults is crucial for maintaining the safety and reliability of transmission lines (TLs). Distance relays (DRs), which protect TLs, detect faults, estimate their location, and send the required commands. However, these relays may experience mis‐detection due to manipulated impedance arising from both internal and external factors. These factors include measurement device errors, network topology changes, the presence of fault resistance (FR), and injected currents from remote line terminals. To address this challenge, an innovative adaptive protection scheme that considers FR, changes in network topology, and injected current from the opposite end of the line is proposed. By estimating the equivalent circuit impedances (ECIs) of the network connected to the terminal of the TL, this protection scheme utilizes impedance estimation techniques at the line terminals and offline network information. Simulation studies (tested on the IEEE 39‐bus standard network) show that the proposed scheme accurately estimates fault location (FL) and FR with high precision. The simulation results demonstrate its effectiveness in improving the performance of conventional distance protection relays in both the first and second protection zones (Zone1 and Zone2 ).

A Modified Formula for Distance Relaying of Tapped Transmission Lines With Grounded Neutrals

An adaptive distance protection scheme considering fault resistance, injected current, and structural changes in the power system

Distance Relaying of Asymmetrical Double-Circuit Transmission Lines Considering Abnormal Faults

New Type Adaptive Distance Relay with Improved Performance

Transmission Line Distance Protection Algorithm Based on Bayesian Inference

A combined algorithm for high speed transmission-line protection based on traveling-wave

Research on a Distance Relay-Based Wide-Area Backup Protection Algorithm for Transmission Lines

Distance Protection Principle for Series Compensated Lines Based on the Impedance Angle of the Compensated Point

Adaptive Distance Relay for Preventing Error Action of Reactive Fault

An Integrated Protection Scheme Based On A Distance Approach

A Traveling-Wave-based Line Protection Strategy Against Single-Line-to-ground Faults in Active Distribution Networks

Fast distance protection based on real-time estimation of transient main frequency

Transmission Line Fault Distance Measurement based on Time Difference between Travelling Wave Reflection and Refraction

Three-Terminal Transmission Line Protection By Considering Effect of Infeed Current

A Moving Window Numerical Distance Protection Based on Flat-Top Signal Windowing

A protection scheme for the transmission line connecting large-scale centralized solar PV plant

Error Analysis of Distance Relay Protection in Phase-to-Phase Short Circuit Fault

New Fault Location Method for HV T-connection. Transmission Lines

A Novel Non-Unit Protection for Series Compensated EHV Transmission Lines Based on Fault Generated High Frequency Voltage Signals

Traveling-wave Differential Relay Scheme for Double-circuit Parallel Lines on the Same Pole

Non-communication Protection for Single-Phase-to-Ground Fault Feeder in Neutral Non-Effectively Grounded Distribution System