Abstract:Zinc tin oxide (ZTO) thin films can be deposited by atomic layer deposition (ALD) with adjustable electrical, optical and structural properties. However, the ternary ALD processes usually suffer from low growth rate and difficulty in controlling film thickness and elemental composition, due to the interaction of ZnO and SnO2 processes. In this work, ZTO thin films with different Sn levels are prepared by ALD super cycles using diethylzinc, tetrakis(dimethylamido)tin, and water. It is observed that both the film growth rate and atom composition show nonlinear variation versus [Sn]/([Sn]+[Zn]) cycle ratio. The experimental thickness measured by spectroscopic ellipsometry and X-ray reflectivity are much lower than the expected thickness linearly interpolated from pure ZnO and SnOx films. The [Sn]/([Sn]+[Zn]) atom ratios estimated by X-ray photoelectron spectroscopy have higher values than that expected from the cycle ratios. Hence, to characterize the film growth behavior versus cycle ratio, a numerical method is proposed by simulating the effect of reduced density and reactivity of surface hydroxyls and surface etching reactions. The structure, electrical and optical properties of ZTO with different Sn levels are also examined by X-ray diffraction, atomic force microscope, Hall measurements and ultraviolet–visible–infrared transmittance spectroscopy. The ZTO turns out to be transparent nanocrystalline or amorphous films with smooth surface. With more Sn contents, the film resistivity gets higher (>1 Ω cm) and the optical bandgap rises from 3.47 to 3.83 eV.

Accelerated optimization of transparent, amorphous zinc-tin-oxide thin films for optoelectronic applications

Variation in the Bandgap of Amorphous Zinc Tin Oxide: Investigating the Thickness Dependence via In Situ STS

Thin-Film Transistors Based on Amorphous ZnNbSnO Films with Enhanced Behaviors

Continuous Tuning of the Fermi Level in Disorder-Engineered Amorphous Films of Li-Doped ZnO for Thermoelectric Applications

ZnO-based Semiconductors and Structures for Transistors, Optoelectronic Devices and Sustainable Electronics

Multi-component Transparent Conducting Oxides: Progress in Materials Modelling

All‐Oxide Transparent Thin‐Film Transistors Based on Amorphous Zinc Tin Oxide Fabricated at Room Temperature: Approaching the Thermodynamic Limit of the Subthreshold Swing

Design of InZnSnO Semiconductor Alloys Synthesized by Supercycle Atomic Layer Deposition and Their Rollable Applications

Amorphous ZnAlSnO Thin-Film Transistors by a Combustion Solution Process for Future Displays

Nonlinear growth of zinc tin oxide thin films prepared by atomic layer deposition

Progress in the Synthesis and Application of Transparent Conducting Film of AZO (ZnO:Al)

A Transparent Electrode Based on Solution-Processed ZnO for Organic Optoelectronic Devices

One-Step Synergistic Treatment Approach for High Performance Amorphous InGaZnO Thin-Film Transistors Fabricated at Room Temperature

High performance of ZnSnO thin-film transistors engineered by oxygen defect modulation

Amorphous oxide semiconductors: From fundamental properties to practical applications

Effect of Mg Content on Characteristics of Amorphous ZnMgSnO Thin-Film Transistors by a Combustion Solution Process

Ultrathin-Film Transistors Based on Ultrathin Amorphous InZnO Films

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Amorphous oxide alloys as interfacial layers with broadly tunable electronic structures for organic photovoltaic cells

Contrasting the grain boundary-affected performance of zinc and indium oxide transparent conductors

Amorphous IZO-based transparent thin film transistors