Abstract:Typically, the columns of the prefabricated reinforced concrete (RC) industrial buildings and warehouses with large clear storey heights are very slender, with aspect ratios (shear span to width) larger than 10. In addition to supporting the gravity loads, the columns also provide strength, stiffness, dissipation and displacement capacity of the primary lateral-load resisting system. However, current empirical relationships that predict the non-linear response and failure mechanisms of RC columns have been developed mainly for lower aspect ratios (< 7), typical of ordinary multi-storey buildings or short-to-medium bridge piers. What makes slender columns different is their predominant flexural response, larger drifts at nominal strength and corresponding lower ductility demands, smaller ratios between the strain penetration and plastic hinge lengths to the element shear span and risk of P-Delta instability. Therefore, the direct application of analytical models available in the literature to slender columns poses a risk of overestimation of their deformation and dissipative capacity. In turns this could lead to the underestimation of their displacement demand, overall damage and collapse probability of the primary seismic-resisting and load-bearing system. In the present research extensive analysis on the non-linear response of slender columns was performed based on observed post-earthquake damage to buildings in Italy and Turkey, experimental data and numerical predictions of the failure patterns through non-linear fiber element models. The influence of the foundation flexibility and the presence of industrial floor was also investigated. The outcome is a simplified analytical methodology for the prediction of the non-linear force–deformation response and possible failure mechanisms of slender precast columns due to rebar buckling or P-Delta effects, as a fundamental step towards the seismic assessment of the global structural performance and cost-efficient retrofit solutions for precast concrete industrial buildings.

Deformation capacity of reinforced concrete columns with smooth reinforcement

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Models of the flexure-controlled strength, stiffness and cyclic deformation capacity of rectangular RC columns with smooth bars, including lap-splicing and FRP jackets

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

Axial Loading Capacity Of Concrete-Jacketed Rc Columns With Pre- And Post-Corrosion Damage

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Prediction of the post-peak behavior of reinforced concrete columns with and without FRP-jacketing

Analytical Model for Concrete Jacketed RC Columns with Precorrosion and Postcorrosion Damages under Uniaxial Loading

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Performance-based assessment of slender reinforced concrete columns typical of precast industrial buildings

Seismic assessment of reinforced concrete columns with short lap splices

Seismic behavior of multiple reinforcement, high-strength concrete columns: experimental and theoretical analysis

Evaluating the effects of loading protocol on the strength and deformation capacity of Flexure-Shear critical concrete columns

A Method Based on Fracture Mechanics to Investigate the Deformation of Reinforced Concrete Columns

Seismic Performance of Reinforced Concrete Beams Susceptible to Single-Crack Plastic Hinge Behavior

Monotonic and Cyclic Seismic Analyses of Old-Type RC Columns with Short Lap Splices

Load-Resistant Mechanism and Failure Behaviour of RC Flat Plate Slab-Column Joints under Concentric and Eccentric Loading

Deformation Performance of Longitudinal Non-Uniformly Corroded Reinforced Concrete Columns

Analytical model of deformation of reinforced concrete columns based on fracture mechanics

Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression

3D Finite Element Pseudodynamic Analysis of Deficient RC Rectangular Columns Confined with Fiber Reinforced Polymers under Axial Compression