Abstract:In recent years, there has been a focused effort to reduce the harmful effects of synthetic and mineral-based lubricants by emphasizing the use of biodegradable-based lubricants. These lubricants play a crucial role in minimizing friction, ensuring smooth operation of machines, and reducing the likelihood of frequent failures. With petroleum-based reserves depleting worldwide, prices are rising, and environmental damage is increasing. However, biolubricants derived from nonedible vegetable oils offer environmental benefits as they are nontoxic, emit minimal greenhouse gases, and are biodegradable. In this study, biolubricants are synthesized from jatropha and jojoba oil using sulphuric acid (H 2 SO 4 ) and hydrochloric acid (HCl) as catalysts through the transesterification and epoxidation processes. The optimization of influencing parameters is achieved using Taguchi's orthogonal array, a statistical methodology. By employing design of experiments (DOE), the number of experimental trials is minimized while providing comprehensive details on the impact of control factors such as molar ratio, catalyst concentrations, and temperature. The results obtained from DOE reveal that the best optimized yield for jatropha biolubricant with H 2 SO 4 and HCl catalysts is achieved with a molar ratio of 0.5:1.5, a temperature of 70 °C, and a catalyst concentration of 1.2 ml. The experimental yield for jatropha biolubricant with H 2 SO 4 and HCl catalysts was measured at 226 ml and 238 ml, respectively, while the model predicted yield was 221 ml and 231 ml, respectively. The experimental yield for jojoba biolubricant with H 2 SO 4 and HCl catalysts was recorded at 232 ml and 248 ml respectively, whereas the model predicted yield was 226 ml and 245 ml, respectively. Based on the analysis of variance (ANOVA) results, it is evident that among the three control factors, the molar ratio significantly influences the yield of both jatropha and jojoba biolubricants, as indicated by a p -value of less than 5%. The percentage contribution of the molar ratio in jatropha biolubricant with H 2 SO 4 and HCl catalysts is found to be 98.99% and 97.2%, respectively. Furthermore, the R 2 value, which exceeds 90%, signifies a strong relationship between the independent and dependent variables. The deviation between the experimental and regression-predicted equations for the yield remains within 2.5% for all combinations of jatropha and jojoba biolubricants. In conclusion, the study successfully prepared biolubricants from jatropha and jojoba-based non-edible vegetable oils and determined the optimal conditions for their production.

Process Integration and Feedstock Optimisation of a Two-Step Biodiesel Production Process from Jatropha Curcas Using Aspen Plus

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Metal-Organic Framework-Derived Solid Catalyst for Biodiesel Production from Jatropha curcas Oil: Kinetic Study and Process Optimization Using Response Surface Methodology

RSM integrated GWO, Driving Training, and Election-Based Algorithms for optimising ethylic biodiesel from ternary oil of neem, animal fat, and jatropha

Response surface optimization, kinetics, thermodynamics, and life cycle cost analysis of biodiesel production from Jatropha curcas oil using biomass-based functional activated carbon catalyst

Design and Simulation of the Biodiesel Process Plant for Sustainable Fuel Production

Application of adaptive neuro-fuzzy inference system and response surface methodology in biodiesel synthesis from jatropha–algae oil and its performance and emission analysis on diesel engine coupled with generator

Two-step biocatalytic process using lipase and whole cell catalysts for biodiesel production from unrefined jatropha oil

Comprehensive Optimisation of Biodiesel Production Conditions via Supercritical Methanolysis of Waste Cooking Oil

Production of Biodiesel from Mixed Castor Seed and Microalgae Oils: Optimization of the Production and Fuel Quality Assessment

Response surface optimization of the bio-oil yield from Jatropha gossypiifolia L. seeds through ultrasonic-assisted solvent extraction

Optimisation, experimental validation and thermodynamic study of the sequential oil extraction and biodiesel production processes from seeds of Sterculia foetida

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Response Surface Optimization of Biocatalytic Biodiesel Production with Acid Oil

Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments

Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology

Production and Optimization of Biodiesel in a Membrane Reactor, Using a Solid Base Catalyst

Process optimization of biodiesel production using antlion optimizer

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

Sulfamic acid modified UiO-66 metal-organic framework for biodiesel production: Process optimization using response surface methodology, kinetics, and thermodynamic study