Abstract:A planar shared-aperture beam-scanning array antenna for simultaneous transmitting and receiving satellite communication is proposed. The antenna operates in dual working bands with right-handed circular polarization (RHCP) from 17.7 to 21.2 GHz and left-handed circular polarization (LHCP) from 27.5 to 31.0 GHz. For the K-/Ka-band shared-aperture beam-scanning array antenna, the main challenge is to simultaneously achieve a wide beam scanning range, low profile, and high cross-band isolation. Compared to high-profile endfire duplexing or filtering antennas, planar laminated antennas have a stronger coupling between two elements operated at different frequency bands. In this design, two embedded two-stage filters are proposed and integrated into the dual-band feeders. The minimum spacing between the elements is 1/4 wavelength, and both in-band wideband impedance matching and cross-band filtering are performed simultaneously. First, two square lattices with a 45° rotation angle between them and a non-stacked topology are employed in the design of uniform arrays for both bands. This design is better suited for this filtering array. Second, to improve CP performance during beam scanning, the Ka-band-induced current on the K-band radiator should be suppressed. The rotary feed phase and the segmented patch are used to suppress the induced current and produce the reverse induced current in the small and large beam scanning area, respectively. Finally, the equivalent circuits and chain matrices are used to design the filtering feeders. As a result, the dual cross-band isolations increase to 38 and 41 dB. The total profile is less than 3.2 mm, much smaller than the existing K-/Ka-band filtering antenna’s profile of 10 mm, and the proposed design also has a wide operating bandwidth and a large beam scanning range of ±60°.

Integrated Active Phased Array Antenna for Mobile Satellite Communication

The Design of a K-Band 256-Element Reconfigurable Multi-Beam Phased-Array for SATCOM Application

Design of a 64-Element Dual-Polarized Planar Receive Phased Array with Four Concurrent Reconfigurable Beams for Ka-Band SATCOM

A K-Band 4-Element 8-Beam Phased-Array Receiver with Hybrid Vector Interpolation and Impedance-Adapted Multibeam Combining Techniques for Satellite Communications

Wideband Simultaneous Dual Circularly Polarized Phased Array Subarray with Scalable Characteristics for Satellite Communications

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Design of A Low-Profile Dual-Band Shared-Aperture Circularly Polarized Phased Array

Lower Sidelobe Phased Array Based on Pattern Reconfigurable Elements

K-/Ka-Band Planar Shared-Aperture Beam-Scanning Array Antenna for Simultaneous Transmitting and Receiving Low Earth Orbit Satellite Communication Terminal

Low-Profile Dual Circularly Polarized Antenna Array for Satellite Communications in the X Band

A Flexible Implementation of Ka-Band Active Phased Array for Satellite Communication

A compact channel patch antenna with reconfigurable circularly polarized pattern for mobile satellite communications

Phased Array Metantennas for Satellite Communications

Highly Integrated Q/V-Band Multi-Beam Phased Array Antenna for LEO Communication Satellite

A Ka-band Dualband Reflectarray Antenna with Solar Cells

Development of an X-Band Reflectarray Antenna for Satellite Communications

Compact Mobile Terminal Antenna With Endfire Circularly Polarized Beam for Satellite Communications

Flat-Panel Wideband Dual-Circularly Polarized 8×8 Phased Array Antenna for SATCOM Applications

Wideband Circularly Polarized Phased Array Antenna System for Wide Axial Ratio Scanning

A Wide-Band Low-Profile Antenna for a High-Integration Phased Array System

Compact 2 × 2 Circularly Polarized Aperture-Coupled Antenna Array for Ka-Band Satcom-on-the-Move Applications