Abstract:Fundamental understanding of turbulent flow and heat transfer in composite porous-fluid systems, which consists of a fluid-saturated stochastic open-cell metal foam and a flow passing over it, is crucial for fostering technological development in numerous applications such as transpiration cooling in aerospace, packed-bed thermal storage and thermal management of electronic devices. In this work, conjugate heat transfer simulations were adopted to explore the turbulent flow and heat transfer features in a composite porous-fluid system at the pore scale. Simulations were performed to account for the influence of the blockage ratios (i.e., BR = 0.5, 0.8 and 1.0) on pressure drop and heat transfer rate by introducing a new concept called penetration cooling length. Furthermore, the effect of Reynolds numbers (i.e., Re = 1800, 3600 and 7200) at different blockage ratios was investigated in terms of pressure drop, fluid and solid temperatures, interstitial heat transfer coefficient, and flow leakage. Results indicate that for a fixed blockage ratio, as the Reynolds number increases by a factor of 3.0, there is a 14.9-fold increase in the pressure drop and a 2.9-fold increase in the interstitial heat transfer coefficient. Additionally, for a fixed Reynolds number, when the blockage ratio increases by a factor of 2.0, there is a 6.8-fold increase in the pressure drop and a 1.8-fold increase in the interstitial heat transfer coefficient. Flow visualization indicated that the penetration cooling length is influenced by flow leakage from the porous-fluid interface. Results show at small blockage ratios and low Reynolds numbers, a significant portion of the flow from the porous region leaves it to the clear region on top of the porous block. While, at high Reynolds numbers and large blockage ratios, the flow leakage is reduced. Additionally, for a low blockage ratio ( BR < 0.5), the amount of flow leakage depends on the Reynolds number, while it is independent of the Reynolds number for BR > 0.8. Finally, this study introduces a novel correlation for the interstitial heat transfer coefficient derived from conjugate heat transfer pore-scale simulations. The correlation is established on the basis of Reynolds number, blockage ratio, and development length of the metal foam, offering valuable insights into heat transfer phenomena in porous media.

Optimal arrangements of a heat sink partially filled with multilayered porous media employing hybrid nanofluid

Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Three-dimensional analysis of heat transfer and entropy production of jet impingement hybrid nanofluid cooling a porous media-filled heat sink

Application of nanofluid and optimization of pore size arrangement of heterogeneous porous media to enhance mixed convection inside a two-sided lid-driven cavity

Comparison of convective heat transfer in metal foam-filled channels of three different cross-sections

MHD enhanced nanofluid mediated heat transfer in porous metal for CPU cooling

Optimizing heat transfer within a rectangular channel through intermittent metal foam block configurations: A numerical study

Pore-scale Simulation of Flow in Minichannels with Porous Fins

Thermal management of power electronics with liquid cooled metal foam heat sink

Effect of Porous Fin Property on Thermohydraulic Performance of Porous‐Fin Microchannels at Different Geometric Configurations

Optimizing of a metal foam-assisted solar air heater performance: a thermo-hydraulic analysis of porous insert placement

Thermal analysis of metal foam and nanofluid integration in an asymmetrical heated channel

Heat transfer enhancement in a counter-flow sinusoidal parallel-plate heat exchanger partially filled with porous media using metal foam in the channels’ divergent sections

Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Multi-objective optimization of a laterally perforated-finned heat sink with computational fluid dynamics method and statistical modeling using response surface methodology

Numerical Study on Fluid Flow Behavior and Heat Transfer Performance of Porous Media Manufactured by a Space Holder Method

Thermal analysis and optimization approach for ternary nanofluid flow in a novel porous cavity by considering nanoparticle shape factor

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Numerical thermal analysis of nanofluid flow through the cooling channels of a polymer electrolyte membrane fuel cell filled with metal foam