Etching gas-sieving nanopores in single-layer graphene with an angstrom precision for high-performance gas mixture separation

J. Zhao,G. He,S. Huang,L. F. Villalobos,M. Dakhchoune,H. Bassas,K. V. Agrawal

DOI: https://doi.org/10.1126/sciadv.aav1851

IF: 13.6

2019-01-04

Science Advances

Abstract:High-density nanopores with a size resolution of 1 Å were etched on graphene by decoupled defect nucleation and pore expansion.

multidisciplinary sciences

What problem does this paper attempt to address?

Fabrication of Sub-Nanometer Pores on Graphene Membrane for Ion Selective Transport

Han Qi,Zhongwu Li,Yi Tao,Weiwei Zhao,Kabin Lin,Zhenhua Ni,Chuanhong Jin,Yan Zhang,Kedong Bi,Yunfei Chen

DOI: https://doi.org/10.1039/c8nr00050f

IF: 6.7

2018-01-01

Nanoscale

Abstract:The ability to sieve ions through nanopores with high throughput has significant importance in seawater desalination and other separation applications. In this study, a plasma etching process has been demonstrated to be an efficient way to produce high-density nanopores on graphene membranes with tunable size in the sub-nanometer range. Besides the pore size, the nanopore density is also controllable through adjusting the exposure time of the sample to argon or oxygen plasma. The plasma-treated graphene membranes can selectively transport protons, Na+ and Cl- ions. Density function theory calculations uncover that the sp3 and vacancy-type defects construct different energy barriers for different ions, which allow the defected graphene membrane to selectively transport ions. Our study indicates that oxygen plasma etching can be used as a very convenient and efficient method for fabricating a monolayer filtration graphene membrane with tunable sub-nanometer pores.
Advancing Molecular Sieving via Å-Scale Pore Tuning in Bottom-Up Graphene Synthesis

Cédric Van Goethem,Yueqing Shen,Heng-Yu Chi,Mounir Mensi,Kangning Zhao,Arian Nijmeijer,Paul-Emmanuel Just,Kumar Varoon Agrawal

DOI: https://doi.org/10.1021/acsnano.3c11885

IF: 17.1

2024-02-08

ACS Nano

Abstract:Porous graphene films are attractive as a gas separation membrane given that the selective layer can be just one atom thick, allowing high-flux separation. A favorable aspect of porous graphene is that the pore size, essentially gaps created by lattice defects, can be tuned. While this has been demonstrated for postsynthetic, top-down pore etching in graphene, it does not exist in the more scalable, bottom-up synthesis of porous graphene. Inspired by the mechanism of precipitation-based...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Direct synthesis of nanocrystalline single-layer porous graphene for hydrogen sieving

Ceren Kocaman,Luc Bondaz,Mojtaba Rezaei,Jian Hao,Kumar Agrawal

DOI: https://doi.org/10.2139/ssrn.4646521

IF: 10.9

2024-02-03

Carbon

Abstract:Porous single-layer graphene is promising as the selective layer for membrane-based gas separation thanks to the atomic thickness of the pore which can yield high permselective flux. Direct synthesis of porous graphene by chemical vapor deposition (CVD) is highly attractive to reduce the number of steps in membrane fabrication. This has been demonstrated in the past by incorporating pores as grain-boundary defects, however, pore density in graphene has been limited because of challenges in increasing grain density of single layers to nanocrystalline regime. Herein, we systematically tune the CVD conditions including growth temperature, methane partial pressure and methane/hydrogen ratio to find a low-temperature growth regime where continuous unfragmented graphene film could be synthesized while avoiding multilayers. The resulting graphene is nanocrystalline composed of misoriented nanometer-scale grains with a high density of hydrogen-permeable multivacancy defects or pores. Centimeter-scale single-layer porous graphene membranes yield extremely high H 2 /SF 6 selectivity, reaching above 1000, confirming the high-quality of porous graphene with pores smaller than 0.55 nm, consistent with the structure and distribution of vacancy defects revealed with microscopy.

materials science, multidisciplinary,chemistry, physical
Molecular sieving through a graphene nanopore: non-equilibrium molecular dynamics simulation

Chengzhen Sun,Bofeng Bai

DOI: https://doi.org/10.1016/j.scib.2017.03.004

IF: 18.9

2017-01-01

Science Bulletin

Abstract:Two-dimensional graphene nanopores have shown great promise as ultra-permeable molecular sieves based on their size-sieving effects. We design a nitrogen/hydrogen modified graphene nanopore and conduct a transient non-equilibrium molecular dynamics simulation on its molecular sieving effects. The distinct time-varying molecular crossing numbers show that this special nanopore can efficiently sieve CO2 and H2S molecules from CH4 molecules with high selectivity. By analyzing the molecular structure and pore functionalization-related molecular orientation and permeable zone in the nanopore, density distribution in the molecular adsorption layer on the graphene surface, as well as other features, the molecular sieving mechanisms of graphene nanopores are revealed. Finally, several implications on the design of highly-efficient graphene nanopores, especially for determining the porosity and chemical functionalization, as gas separation membranes are summarized based on the identified phenomena and mechanisms.
Facile and Ultraclean Graphene-on-Glass Nanopores by Controlled Electrochemical Etching

Xiaoyan Zhang,Pauline M. G. van Deursen,Wangyang Fu,Gregory F. Schneider

DOI: https://doi.org/10.1021/acssensors.0c00883

2020-12-11

Abstract:A wide range of approaches have been explored to meet the challenges of graphene nanostructure fabrication, all requiring complex and high-end nanofabrication platform and suffering from surface contaminations, potentially giving electrical noise and increasing the thickness of the atomically thin graphene membrane. Here, with the use of an electrical pulse on a low capacitance graphene-on-glass (GOG) membrane, we fabricated clean graphene nanopores on commercially available glass substrates with exceptionally low electrical noise. In situ liquid AFM studies and electrochemical measurements revealed that both graphene nanopore nucleation and growth stem from the electrochemical attack on carbon atoms at defect sites, ensuring the creation of a graphene nanopore. Strikingly, compared to conventional TEM drilled graphene nanopores on SiN supporting membranes, GOG nanopores featured an order-of-magnitude reduced broadband noise, which we ascribed to the electrochemical refreshing of graphene nanopore on mechanically stable glass chips with negligible parasitic capacitance (1 pF). Further experiments on double-stranded DNA translocations demonstrated a greatly reduced current noise, and also confirmed the activation of single nanopores. Therefore, the exceptionally low noise and ease of fabrication will facilitate the understanding of the fundamental property and the application of such atomically thin nanopore sensors.

Materials Science
Gas Separation Membranes with Atom-Thick Nanopores: The Potential of Nanoporous Single-Layer Graphene

Luis Francisco Villalobos,Deepu J Babu,Kuang-Jung Hsu,Cédric Van Goethem,Kumar Varoon Agrawal

DOI: https://doi.org/10.1021/accountsmr.2c00143

2022-10-28

Abstract:Gas separation is one of the most important industrial processes and is poised to take a larger role in the transition to renewable energy, e.g., carbon capture and hydrogen purification. Conventional gas separation processes involving cryogenic distillation, solvents, and sorbents are energy intensive, and as a result, the energy footprint of gas separations in the chemical industry is extraordinarily high. This has motivated fundamental research toward the development of novel materials for high-performance membranes to improve the energy efficiency of gas separation. These novel materials are expected to overcome the intrinsic limitations of the conventional membrane material, i.e., polymers, where a longstanding trade-off between the separation selectivity and the permeance has motivated research into nanoporous materials as the selective layer for the membranes. In this context, atom-thick materials such as nanoporous single-layer graphene constitute the ultimate limit for the selective layer. Gas transport from atom-thick nanopores is extremely fast, dependent primarily on the energy barrier that the gas molecule experiences in translocating the nanopore. Consequently, the difference in the energy barriers for two gas molecules determines the gas pair selectivity. In this Account, we summarize the development in the field of nanoporous single-layer graphene membranes for gas separation. We start by discussing the mechanism for gas transport across atom-thick nanopores, which then yields the crucial design elements needed to achieve high-performance membranes: (i) nanopores with an adequate electron-density gap to sieve the desired gas component (e.g., smaller than 0.289, 0.33, 0.346, 0.362, and 0.38 nm for H2, CO2, O2, N2, and CH4, respectively), (ii) narrow pore size distribution to limit the nonselective effusive transport from the tail end of the distribution, and (iii) high density of selective pores. We discuss and compare the state-of-the-art bottom-up and top-down routes for the synthesis of nanoporous graphene films. Mechanistic insights and parameters controlling the size, distribution, and density of nanopores are discussed. Fundamental insights are provided into the reaction of ozone with graphene, which has been successfully used by our group to develop membranes with record-high carbon capture performance. Postsynthetic modifications, which allow the tuning of the transport by (i) tailoring the relative contributions of adsorbed-phase and gas-phase transport, (ii) competitive adsorption, and (iii) molecular cutoff adjustment, are discussed. Finally, we discuss practical aspects that are crucial in successfully preparing practical membranes using atom-thick materials as the selective layer, allowing the eventual scale-up of these membranes. Crack- and tear-free preparation of membranes is discussed using the approach of mechanical reinforcement of graphene with nanoporous carbon and polymers, which led to the first reports of millimeter- and centimeter-scale gas-sieving membranes in the year 2018 and 2021, respectively. We conclude with insights and perspectives highlighting the key scientific and technological gaps that must be addressed in the future research.
Exponentially selective molecular sieving through angstrom pores

P.Z. Sun,M. Yagmurcukardes,R. Zhang,W.J. Kuang,M. Lozada-Hidalgo,B. L. Liu,H.-M. Cheng,F.C. Wang,F.M. Peeters,I.V. Grigorieva,A.K. Geim

DOI: https://doi.org/10.1038/s41467-021-27347-9

2021-12-09

Abstract:Two-dimensional crystals with angstrom-scale pores are widely considered as candidates for a next generation of molecular separation technologies aiming to provide extreme, exponentially large selectivity combined with high flow rates. No such pores have been demonstrated experimentally. Here we study gas transport through individual graphene pores created by low intensity exposure to low kV electrons. Helium and hydrogen permeate easily through these pores whereas larger species such as xenon and methane are practically blocked. Permeating gases experience activation barriers that increase quadratically with molecules' kinetic diameter, and the effective diameter of the created pores is estimated as ~2 angstroms, about one missing carbon ring. Our work reveals stringent conditions for achieving the long sought-after exponential selectivity using porous two-dimensional membranes and suggests limits on their possible performance.

Mesoscale and Nanoscale Physics,Materials Science
Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Yanan Chen,Yilin Wang,Shuze Zhu,Kun Fu,Xiaogang Han,Yanbin Wang,Bin Zhao,Tian Li,Boyang Liu,Yiju Li,Jiaqi Dai,Hua Xie,Teng Li,John W. Connell,Yi Lin,Liangbing Hu

DOI: https://doi.org/10.1016/j.mattod.2018.09.001

IF: 24.2

2018-01-01

Materials Today

Abstract:Facile and scalable fabrication of highly dense and high-quality graphene films and articles is extremely attractive for a range of electronic and mechanical applications. Pristine, high-quality graphene with its inherent impermeability poses challenges in fabricating dense films and thick parts with high electrical conductivity due to the difficulty in removing trapped air and/or solvents used in various fabrication methods. To overcome this deficiency, nano-holes were intentionally created in pristine graphene ("holey graphene") with an average diameter of approximately 15 nm. The holes serve as pathways for the rapid removal of gases or liquids and enable the fabrication of dense holey graphene nanostructures. Subsequently, a high-temperature process is applied to effectively repair the nano-holes and recover the high-quality graphene conjugated network. Through the creation and repair of the nano-holes, dense graphene articles that exhibited an ultrahigh conductivity of 2209 S/cm and superior thermal conductivity of 863 W/mK were created. This unique processing methodology enables the facile and scalable fabrication of high-quality graphene constructs, which can be easily integrated into the next generation of electronic circuits and high-power battery systems for highly efficient and lightweight thermal management.
Bottom-up synthesis of graphene films hosting atom-thick molecular-sieving apertures

Luis Francisco Villalobos,Cédric Van Goethem,Kuang-Jung Hsu,Shaoxian Li,Mina Moradi,Kangning Zhao,Mostapha Dakhchoune,Shiqi Huang,Yueqing Shen,Emad Oveisi,Victor Boureau,Kumar Varoon Agrawal

DOI: https://doi.org/10.1073/pnas.2022201118

2021-09-14

Abstract:Incorporation of a high density of molecular-sieving nanopores in the graphene lattice by the bottom-up synthesis is highly attractive for high-performance membranes. Herein, we achieve this by a controlled synthesis of nanocrystalline graphene where incomplete growth of a few nanometer-sized, misoriented grains generates molecular-sized pores in the lattice. The density of pores is comparable to that obtained by the state-of-the-art postsynthetic etching (1012 cm-2) and is up to two orders of magnitude higher than that of molecular-sieving intrinsic vacancy defects in single-layer graphene (SLG) prepared by chemical vapor deposition. The porous nanocrystalline graphene (PNG) films are synthesized by precipitation of C dissolved in the Ni matrix where the C concentration is regulated by controlled pyrolysis of precursors (polymers and/or sugar). The PNG film is made of few-layered graphene except near the grain edge where the grains taper down to a single layer and eventually terminate into vacancy defects at a node where three or more grains meet. This unique nanostructure is highly attractive for the membranes because the layered domains improve the mechanical robustness of the film while the atom-thick molecular-sized apertures allow the realization of large gas transport. The combination of gas permeance and gas pair selectivity is comparable to that from the nanoporous SLG membranes prepared by state-of-the-art postsynthetic lattice etching. Overall, the method reported here improves the scale-up potential of graphene membranes by cutting down the processing steps.
Cascaded compression of size distribution of nanopores in monolayer graphene

Jiangtao Wang,Chi Cheng,Xudong Zheng,Juan Carlos Idrobo,Ang-Yu Lu,Ji-Hoon Park,Bong Gyu Shin,Soon Jung Jung,Tianyi Zhang,Haozhe Wang,Guanhui Gao,Bongki Shin,Xiang Jin,Long Ju,Yimo Han,Lain-Jong Li,Rohit Karnik,Jing Kong

DOI: https://doi.org/10.1038/s41586-023-06689-y

IF: 64.8

2023-11-30

Nature

Abstract:Monolayer graphene with nanometre-scale pores, atomically thin thickness and remarkable mechanical properties provides wide-ranging opportunities for applications in ion and molecular separations 1 , energy storage 2 and electronics 3 . Because the performance of these applications relies heavily on the size of the nanopores, it is desirable to design and engineer with precision a suitable nanopore size with narrow size distributions. However, conventional top-down processes often yield log-normal distributions with long tails, particularly at the sub-nanometre scale 4 . Moreover, the size distribution and density of the nanopores are often intrinsically intercorrelated, leading to a trade-off between the two that substantially limits their applications 5,6,7,8,9 . Here we report a cascaded compression approach to narrowing the size distribution of nanopores with left skewness and ultrasmall tail deviation, while keeping the density of nanopores increasing at each compression cycle. The formation of nanopores is split into many small steps, in each of which the size distribution of all the existing nanopores is compressed by a combination of shrinkage and expansion and, at the same time as expansion, a new batch of nanopores is created, leading to increased nanopore density by each cycle. As a result, high-density nanopores in monolayer graphene with a left-skewed, short-tail size distribution are obtained that show ultrafast and ångström-size-tunable selective transport of ions and molecules, breaking the limitation of the conventional log-normal size distribution 9,10 . This method allows for independent control of several metrics of the generated nanopores, including the density, mean diameter, standard deviation and skewness of the size distribution, which will lead to the next leap in nanotechnology.

multidisciplinary sciences
Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation

Kangning Zhao,Wan-Chi Lee,Mojtaba Rezaei,Heng-Yu Chi,Shaoxian Li,Luis Francisco Villalobos,Kuang-Jung Hsu,Yuyang Zhang,Feng-Chao Wang,Kumar Varoon Agrawal

DOI: https://doi.org/10.1021/acsnano.3c11068

IF: 17.1

2024-02-06

ACS Nano

Abstract:Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free macroscopic graphene membrane for ion-ion separation has not been realized. Further, methods to tune the pores in the Å-regime to achieve a large ion-ion selectivity from the graphene pore have not been realized. Herein, we report an Å-scale pore size tuning tool for single layer graphene, which incorporates a high density of ion-ion selective pores between 3.5 and 8.5 Å while minimizing the nonselective pores above 10 Å. These pores impose a strong confinement for ions, which results in extremely high selectivity from centimeter-scale porous graphene between monovalent and bivalent ions and near complete blockage of ions with the hydration diameter, DH, greater than 9.0 Å. The ion diffusion study reveals the presence of an energy barrier corresponding to partial dehydration of ions with the barrier increasing with DH. We observe a reversal of K+/Li+ selectivity at elevated temperature and attribute this to the relative size of the dehydrated ions. These results underscore the promise of porous two-dimensional materials for solute-solute separation when Å-scale pores can be incorporated in a precise manner.
Exploring an In-Plane Graphene and Hexagonal Boron Nitride Array for Separation of Single Nucleotides

Zhi He,Ruhong Zhou

DOI: https://doi.org/10.1021/acsnano.1c02450

IF: 17.1

2021-01-01

ACS Nano

Abstract:Regular nanofluidic sieving structures are emerging as rapid and compatible on-chip techniques for biomolecular separation. Although the current nanofluidic sieving devices, mostly based on three-dimensional nanostructures, have achieved a separation resolution of similar to 20 nm, it is still far away from single-nucleotide resolution. Using all-atom molecular dynamics simulations, here we demonstrate a two-dimensional (2D) nanofluidic sieve consisting of an in-plane graphene (GRA)/hexagonal boron nitride (h-BN) nanoarray, which enables ultrahigh resolution in the successful separation of four types of single nucleotides. The alternating GRA and h-BN stripes can create size-dependent energy barriers for adsorbed nucleotides, which provide a strong modulation for their mobility, thus causing distinct band separations on the 2D surface. We further show that this 2D sieve is particularly sensitive when the sample dimensions are within the range from a half period to one period of the nanoarray. This 2D sieving structure may shed light on the development of lab-on-a-chip sequencing in the future.
Multilayer Graphene Sheet with Conical Nanopores As a Membrane for High-Permeance Molecular Separation

Chengzhen Sun,Runfeng Zhou,Bofeng Bai,Yuansheng Lin,Bangming Li

DOI: https://doi.org/10.1021/acs.jpcc.0c10717

2021-01-01

Abstract:Mitigating leaks through permeable defects by stacking graphene layers would greatly reduce the molecular permeance through porous graphene membranes for gas separation. We propose a multilayer graphene membrane with conical nanopores which instead presents an ultrahigh molecular permeance even higher than those of single-layer graphene membranes. Comparison with existing experimental data also shows that such membranes present an excellent separation performance in the aspect of molecular permeance. The highly permeable conical nanopore is particularly promising for the strongly adsorbed gases on the graphene surface, such as CO2 and H2S. The underlying mechanisms are revealed by using molecular dynamics simulations, including (1) a large permeable area in the penetration side and (2) low permeation resistance caused by molecular bouncing in the nanopore for finding a possibility of permeation. The proposed conical nanopore can not only improve the molecular permeance through the defect-free and easy-fabricated multilayer graphene membranes but also provide a good example for the applications involving molecular permeation through nanopores.
Selective Molecular Sieving Through a Large Graphene Nanopore with Surface Charges.

Chengzhen Sun,Shaohua Zhu,Maochang Liu,Shaohua Shen,Bofeng Bai

DOI: https://doi.org/10.1021/acs.jpclett.9b02715

2019-01-01

Abstract:The precise control of the pore sizes at an atomic level has proved to be the biggest challenge of all for nanoporous graphene membranes for gas separation. Here, we propose a simple method to realize the selective molecular sieving through originally nonselective graphene nanopores by adding charges on the graphene surfaces. Molecular dynamic simulations show that the CO2/N-2 selectivity of the graphene nanopore with a diameter of 0.52 nm increases up to 22.78 for a surface charge density of only -5.934 e/nm(2). The selectivity improvement is related to the distinctive adsorption intensities of CO2 and N-2 molecules on the charge-loaded graphene surfaces. This work points toward a promising road to tune the selectivity of graphene nanopores and therefore promotes the realization of porous graphene membranes and other two-dimensional porous membranes by accepting the pores with a wide size distribution and reducing the requirements in the control of pore sizes.
Strain-Guided Oxidative Nanoperforation on Graphene.

Xiangbiao Liao,Baidu Zhang,Takumi Furutani,Youlong Chen,Hang Xiao,Yong Ni,Akio Yonezu,Xi Chen

DOI: https://doi.org/10.1002/smll.201903213

IF: 13.3

2019-01-01

Small

Abstract:Increased applications of nanoporous graphene in nanoelectronics and membrane separations require ordered and precise perforation of graphene, whose scalablility and time/cost effectiveness represent a significant challenge in existing nanoperforation methods, such as catalytical etching and lithography. A strain-guided perforation of graphene through oxidative etching is reported, where nanopores nucleate selectively at the bulges induced by the prepatterned nanoprotrusions underneath. Using reactive molecular dynamics and theoretical models, the perforation mechanisms are uncovered through the relationship between bulge-induced strain and enhanced etching reactivity. Parallel experiments of chemical vapor deposition (CVD) of graphene on SiO2 NPs/SiO2 substrates verify the feasibility of such strain-guided perforation and evolution of pore size by exposure of varied durations to oxygen plasma. This scalable method can be feasibly applied to a broad variety of 2D materials (e.g., graphene and h-boron nitride) and nanoprotrusions (e.g., SiO2 and C-60 nanoparticles), allowing rational fabrication of 2D material-based devices.
Selective molecular sieving through porous graphene

Steven P. Koenig,Luda Wang,John Pellegrino,J. Scott Bunch

DOI: https://doi.org/10.1038/nnano.2012.162

IF: 38.3

2012-10-07

Nature Nanotechnology

Abstract:Membranes act as selective barriers and play an important role in processes such as cellular compartmentalization and industrial-scale chemical and gas purification. The ideal membrane should be as thin as possible to maximize flux, mechanically robust to prevent fracture, and have well-defined pore sizes to increase selectivity. Graphene is an excellent starting point for developing size-selective membranes1,2,3,4,5,6,7,8 because of its atomic thickness9, high mechanical strength10, relative inertness and impermeability to all standard gases11,12,13,14. However, pores that can exclude larger molecules but allow smaller molecules to pass through would have to be introduced into the material. Here, we show that ultraviolet-induced oxidative etching15,16 can create pores in micrometre-sized graphene membranes, and the resulting membranes can be used as molecular sieves. A pressurized blister test and mechanical resonance are used to measure the transport of a range of gases (H2, CO2, Ar, N2, CH4 and SF6) through the pores. The experimentally measured leak rate, separation factors and Raman spectrum agree well with models based on effusion through a small number of ångstrom-sized pores.

materials science, multidisciplinary,nanoscience & nanotechnology
Highly Efficient CO 2 /C 2 H 2 Separation by Porous Graphene via Quadrupole Gating Mechanism

Shuming Zeng,Tian Wang,Yuanbin Zhang,Bruce G. Elmegreen,Binquan Luan,Zonglin Gu

DOI: https://doi.org/10.1021/acs.langmuir.3c00474

IF: 3.9

2023-06-15

Langmuir

Abstract:Acetylene (C2H2) is an important and widely used raw material in various industries (such as petrochemical). Generally, a product yield is proportional to the purity of C2H2; however, C2H2 from a typical industrial gas-production process is commonly contaminated by CO2. So far, the achievement of high-purity C2H2 separated from a CO2/C2H2 mixture is still challenging due to their very close molecular dimensions and boiling temperatures. Taking advantage of their quadrupoles with opposite signs, here, we show that the graphene membrane embedded with crown ether nanopores can achieve an unprecedented separation efficiency of CO2/C2H2. Combining the molecular dynamics simulation and the density functional theory (DFT) approaches, we discovered that the electrostatic gas-pore interaction favorably allows the fast transport of CO2 through crown ether nanopores while completely prohibiting C2H2 transport, which yields a remarkable permeation selectivity. In particular, the utilized crown ether pore is capable of allowing the individual transport of CO2 while completely rejecting the passage of C2H2, independent of the applied pressures, fed gases ratios, and exerted temperatures, featuring the superiority and robustness of the crown pore in CO2/C2H2 separation. Further, DFT and PMF calculations demonstrate that the transport of CO2 through the crown pore is energetically more favorable than the transport of C2H2. Our findings reveal the potential application of graphene crown pore for CO2 separation with outstanding performance.

chemistry, multidisciplinary, physical,materials science
Separation of Hydrogen Gas from Coal Gas by Graphene Nanopores

debing li,wei hu,junqiao zhang,hui shi,qu chen,tianyang sun,lijun liang,qi wang

DOI: https://doi.org/10.1021/acs.jpcc.5b06165

2015-01-01

Abstract:We designed a series of porous graphene as the separation membrane for hydrogen gas in coal gas. The permeation process of different gas molecules (H-2, CO, CH4, and H2S) in porous graphene was evaluated under the atmospheric pressure and high pressure conditions. Our results indicate the hydrogen permeability and selectivity could be tuned by the size and the shape of the porous graphene. For graphene with bigger pores, the selectivity for hydrogen gas could decrease. In the porous graphene with same pore area, the hydrogen gas selectivity could be affected by the shape of the pore. The potential of mean force (PMF) of different gases to pass through a good separation candidate was calculated. The order of PMF for different gases to pass through the good separation candidate is H-2 < CO < CH4 approximate to H2S, which is also confirmed by the first-principle density function theory (DFT) calculation.
Controllable Fabrication of Sub-10 nm Graphene Nanopores via Helium Ion Microscopy and DNA Detection

Zhishan Yuan,Yanbang Lin,Jieming Hu,Chengyong Wang

DOI: https://doi.org/10.3390/bios14040158

2024-03-28

Biosensors

Abstract:Solid-state nanopores have become a prominent tool in the field of single-molecule detection. Conventional solid-state nanopores are thick, which affects the spatial resolution of the detection results. Graphene is the thinnest 2D material and has the highest spatial detection resolution. In this study, a graphene membrane chip was fabricated by combining a MEMS process with a 2D material wet transfer process. Raman spectroscopy was used to assess the quality of graphene after the transfer. The mechanism behind the influence of the processing dose and residence time of the helium ion beam on the processed pore size was investigated. Subsequently, graphene nanopores with diameters less than 10 nm were fabricated via helium ion microscopy. DNA was detected using a 5.8 nm graphene nanopore chip, and the appearance of double-peak signals on the surface of 20 mer DNA was successfully detected. These results serve as a valuable reference for nanopore fabrication using 2D material for DNA analysis.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation

Etching gas-sieving nanopores in single-layer graphene with an angstrom precision for high-performance gas mixture separation

Fabrication of Sub-Nanometer Pores on Graphene Membrane for Ion Selective Transport

Advancing Molecular Sieving via Å-Scale Pore Tuning in Bottom-Up Graphene Synthesis

Direct synthesis of nanocrystalline single-layer porous graphene for hydrogen sieving

Molecular sieving through a graphene nanopore: non-equilibrium molecular dynamics simulation

Facile and Ultraclean Graphene-on-Glass Nanopores by Controlled Electrochemical Etching

Gas Separation Membranes with Atom-Thick Nanopores: The Potential of Nanoporous Single-Layer Graphene

Exponentially selective molecular sieving through angstrom pores

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Bottom-up synthesis of graphene films hosting atom-thick molecular-sieving apertures

Cascaded compression of size distribution of nanopores in monolayer graphene

Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation

Exploring an In-Plane Graphene and Hexagonal Boron Nitride Array for Separation of Single Nucleotides

Multilayer Graphene Sheet with Conical Nanopores As a Membrane for High-Permeance Molecular Separation

Selective Molecular Sieving Through a Large Graphene Nanopore with Surface Charges.

Strain-Guided Oxidative Nanoperforation on Graphene.

Selective molecular sieving through porous graphene

Highly Efficient CO 2 /C 2 H 2 Separation by Porous Graphene via Quadrupole Gating Mechanism

Separation of Hydrogen Gas from Coal Gas by Graphene Nanopores

Controllable Fabrication of Sub-10 nm Graphene Nanopores via Helium Ion Microscopy and DNA Detection