Abstract:In China, several expressways have been designed as prefabricated box culverts with hinge connections, which have different structural features from the prefabricated culverts in other countries. The difference would contribute to the culvert-soil interaction of prefabricated box culverts, which could affect the earth pressure on the culvert. Based on the field test and numerical simulation method, a hinged prefabricated box culvert (HPBC) with a span of 4 m and a rise of 4 m was investigated, which was applied to the Xi-Yu expressway in China. The objective of this research was to investigate the vertical earth pressure on the top slab of the HPBC culvert at different backfill heights through the field tests. The FLAC3D software was employed to conduct further analysis of the effects of backfill height, backfill modulus, and foundation modulus on the vertical earth pressure on the top slab of HPBC. The differences between the HPBC and monolithic box culvert (MBC) were also examined. Furthermore, a revised method for calculating the vertical earth pressure on the top slab was put proposed and compared with the AASHTO method for calculating earth pressure on the top of culverts and the values taken from the Chinese culvert design code. The proposed method is capable of improving the accuracy of the earth pressure approach, making it more representative of actual conditions. Subsequently, the sensitivity analysis of backfill height, backfill modulus and foundation modulus to the vertical earth pressure concentration coefficient of the top slab was carried out by using the principle of orthogonal array analysis and the modified calculation method proposed in this paper. The findings of this study offer valuable insights into the determination of culvert top earth pressure of HPBC.

Analysis of pressure on the roof of a culvert underneath a ditch with compressible material covered by a geosynthetic layer

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Model test and numerical simulation of earth pressure on culvert under different earth backfill conditions

Numerical analysis of the earth pressures and internal forces of the culvert with surrounding grouting and reinforcement

Simulation of Filling Construction of Permeable Geosynthetic Tubes

Analysis Of Active Earth Pressure On Rigid Retaining Walls Considering Soil Arching

Analysis on Long-Term Performance of Capillary-Barrier Cover with Unsaturated Drainage Layer

An Analytical Method for Predicting Load Acting on Geosynthetic Overlying Voids

Numerical Simulation on Load Reduction by Reinforcement Bridge of Culvert Beneath High Filling

A lower bound solution of earth pressure of cohesive backfill with inclined slope surface

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

An Experimental Study on A Culvert Buried in Granular Soil Subjected to Vehicle Loads

Active earth pressures against rigid retaining walls with narrow cohesive backfill

Research on the method of identifying vertical earth pressure of hinged prefabricated culvert box culvert on the top slab

An analytical model for dynamic response of geosynthetic reinforced embankment system under traffic load

Numerical analysis of active earth pressure on rigid retaining wall

Orthogonal Polar Difference Analysis for Sensitivity of the Factors Influencing the Earth Pressures on High Embankment Culvert

Analytical solutions for geosynthetic-reinforced cohesive subgrade spanning trench voids

Model Tests and Theoretical Studies on Earth Pressure on Shallow Positive Buried Culverts

Field Test and Numerical Analysis of Flexible Retaining Wall of Shoulder Geocell

Analysis of Tension and Displacement of Geomembranes Placed on Landfill Slopes