Abstract:The mechanical properties of high-toughness engineering cementitious composites (ECC) were tested, and a damage constitutive model of the materials was constructed. A new aseismic composite structure was then built on the basis of this model by combining aseismic joints, damping layers, traditional reinforced concrete linings, and ECC linings. A series of 3D dynamic-response numerical models considering the composite structure-surrounding rock-fault interaction were established to explore the seismic response characteristics and aseismic performance of the composite structures. The adaptability of the structures to the seismic intensity and direction was also discussed. Results showed that the ECC material displays excellent tensile and compressive toughness, with respective peak tensile and compressive strains of approximately 300- and 3-fold greater than those of ordinary concrete at the same strength grade. The seismic response law of the new composite lining structure was similar to that of the conventional composite structure. The lining in the fault zone and adjacent area showed obvious acceleration amplification responses, and the stress and displacement responses were fairly large. The lining in the fault zone was the weak part of the composite structures. Compared with the conventional aseismic composite structure, the new composite lining structure effectively reduced the acceleration amplification and displacement responses in the fault area. The damage degree of the new composite structure was notably reduced and the damage area was smaller compared with those of the conventional composite structure; these findings demonstrate that the former shows better aseismic effects than the latter. The intensity and direction of seismic waves influenced the damage of the composite structures to some extent, and the applicability of the new composite structure to lateral seismic waves is significantly better than that to axial waves. More importantly, under the action of different seismic intensities and directions, the damage degree and distribution area of the new composite structure were significantly smaller than those of the conventional composite lining structure.

Numerical investigation of the concrete–rock combined body influence of inclined interface on dynamic characteristics and failure behaviors

Dynamic splitting tensile behavior of rock–concrete bimaterial disc with multiple material types under different interface inclination angle

Experimental and numerical investigation of the mechanical properties and energy evolution of sandstone–concrete combined body

Influence of coal-rock interface inclination on the damage and failure law of original coal-rock combination

Experimental and Numerical Investigation on the Dynamic Failure Envelope and Cracking Mechanism of Precompressed Rock under Compression-Shear Loads

Experimental Research on Dynamic Failure of Rock–Cemented Material–Rock Interface Considering Strain Rate Effect

Dynamic fracture behavior and fracture toughness analysis of rock-concrete bi-material with interface crack at different impact angles

Experimental study on the effects of interface dip angle on deformation failure of combined limestone–coal specimens

Dynamic Compression–Shear Response and Failure Criterion of Rocks with Hydrostatic Confining Pressure: An Experimental Investigation

Acoustic emission and electromagnetic radiation of rock under combined compression-shear loading

Study on Coordinated Deformation Failure Mechanism and Strength Prediction Model of Rock-lining Concrete

Compression failure conditions of concrete-granite combined body with different roughness interface

Numerical Analysis of the Seismic Response of Tunnel Composite Lining Structures across an Active Fault

Effect of crack angle and concrete strength on the dynamic fracture behavior of rock-based layered material containing a pre-existing crack

Numerical Investigation on the Dynamic Strength and Failure Behavior of Rocks under Hydrostatic Confinement in SHPB Testing

Numerical Study on the Dynamic Response Characteristics of Liquefiable Silty Sand-Rock Composite Strata – Tunnel System under the Influence of the Vibration of a Shield Cutter-Head

Failure Characteristics of Combined Coal-Rock with Different Interfacial Angles

Dip effect on the orientation of rock failure plane under combined compression–shear loading

The experimental and numerical simulation of interface shear behavior between ECC and coal gangue concrete

Experimental Study on the Dynamic Fracture Characteristics of Mortar–Rock Interface Zones with Different Interface Inclinations and Shapes

Exploring Dynamic Spalling Behavior in Rock–Shotcrete Combinations: A Theoretical and Numerical Investigation