Abstract:This paper analyzes the microstructure and electrical insulation characteristics at the interface of 500 kV cross-linked polyethylene (XLPE) cable factory joints for extra high voltage direct current (EHVDC) application. The interface between two layers was polished by different grit sandpapers (80, 400, 1000, 2000, and 0000 (unpolished)). The samples (#1000) polished by 1000 grit mesh at the interface were degassed at 70 degrees C for 0, 12, 36, 90, and 200 h, respectively. Physico-chemical and electrical experiments were performed on the prepared test samples. It is found that increasing the number of sandpaper grit meshes reduces the average lamellae thickness at the interface and increases the crystallinity. Moreover, microporous defects are observed at the interface. The parameters viz elongation at break, current density, and the number of microporous defects increase initially and then decrease. However, the space charge accumulation, threshold electric field strength, and DC breakdown decrease initially and then increase. Notably, the #1000 roughness is a turning point. On the other side, degassing treatment promotes the orderly folding and recrystallization of the molecular chains arranged the amorphous region and significantly reduces the microporous defects at the interface. The mechanical properties are affected to a certain extent. The improved microstructure reduces the space charge accumulation and the current density of the sample, and increases the DC breakdown strength. An interfacial microscopic model and a charge transport model are proposed to analyze the mechanism of material properties under different roughnesses and electric fields. The results indicate that the ultra-smooth interface and degassing treatment strengthen the molecular chain linking at the interface. Moreover, they significantly reduce the microporous defects at the interface and improve the insulation properties of the factory joint. (C) 2021 Elsevier Ltd. All rights reserved.

Breakdown mechanism Analysis of Silicone Oil Flocculation in XLPE Cable Terminations

Research on DC Breakdown Characteristics for the Insulation of 10 Kv AC XLPE Cables

Interfacial Microstructure and Insulation Properties of 500 Kv EHVDC XLPE Cable Factory Joint under Different Roughness and Degassing Durations

Breakdown Characteristics and Electrical Life Time Evaluation of 525 Kv EHVDC Cable Insulation at Different Temperatures

Breakdown Characteristics and Electrical Life Evaluation of 500 Kv EHVAC Cable Insulation at Different Temperatures

Effect of Tensile Stress on Insulation Properties of 500 Kv EHVAC XLPE Cable under Multi-Field Ageing

Solidification Dynamics of Silicone Oil and Electric Field Distribution within Outdoor Cable Terminations Subjected to Cold Environments

Breakdown failure analysis of 220 kV cable joint with large expanding rate under closing overvoltage

Relationship between the interfacial ramped DC breakdown voltage and the morphology of the XLPE/SiR interface

Fractal Analysis of Side Channels for Breakdown Structures in XLPE Cable Insulation

Interfacial Breakdown and Resistivity Characteristics of Cable Joints under Different Temperatures

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Pressure Dependence of XLPE/SiR Interfacial Breakdown Behavior

The Effect of Frequency on the Breakdown of XLPE Cable Insulation with Artificial Defects

Cause Analysis and Countermeasure of Oil Leakage Caused by Cable Terminal Belt Expansion

Influence of Morphological Variations on the AC Breakdown of XLPE Insulation in Submarine Cable Factory Joints

Interfacial Breakdown Voltage and Morphology of Cable Accessories Considering Different Interface States and Temperatures

Breakdown Strength and Electrical Tree in Homo-Crosslinked-Polyethylene Bilayer

Interface Damages of Electrical Insulation in Factory Joints of High Voltage Submarine Cables

The Lifetime Prediction and Insulation Failure Mechanism of XLPE for High-Voltage Cable

Frequency dependence of breakdown performance of XLPE with different artificial defects