Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Simulation of lamellar pearlite growth morphology with phase-field method

The Study of Widmanstätten Ferrite in Fe–C Alloys by a Phase Field Model Coupled with Anisotropic Elasticity

Phase field molding on the morphologies and growth kinetics of grain boundary ferrite allotriomorphs

The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys

A Molecular Dynamics Study on Formation of the Self-Accommodation Microstructure During Phase Transformation

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Phase Field Simulation of Liquid-Solid-eutectoid Multiple Phase Transformations of a Fe-C Binary Alloy

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Phase-field Simulation of Austenite Growth Behavior: Insights into the Austenite Memory Phenomenon

Microstructure evolution in 439 stainless steels under tensile: phase field simulation and experiment

Three-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in A Low Carbon Microalloyed Steel

Tensile behavior of ferritic/austenitic iron with a bimodal structure:An atomistic study

A three-dimensional phase-field model for studying the orientation-dependent interface evolution in stress-induced martensitic phase transformation

Understanding ferrite deformation caused by austenite to martensite transformation in dual phase steels

Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at.%) martensitic steel governed by a coupled diffusional/displacive mechanism

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Growth Behavior of Ferrite Allotriomorphs Nucleated on Grain Boundary Faces in a Low Carbon Steel

Coarsening Tendency of Ultra-fine Ferrite in Low Carbon Steels

Computation of Phase Fractions in Austenite Transformation with the Dilation Curve for Various Cooling Regimens in Continuous Casting