Abstract:Copper (1) oxide nanoparticles together with matrix polymers of polyvinyl alcohol (PVA) and polyaniline (PANI) composite films were synthesized, as these materials are of importance in optoelectronic applications. ‎Nanoparticles of Cu2O were produced by chemical precipitation. Polymerization of aniline was carried out through polymerization in an acidic medium. Structural, thermal, and optical properties of PVA+PANI/Cu2O nanocomposite were inspected by x-ray diffraction (XRD), scanning electron microscopy (SEM), fourier-transform infrared (FTIR), differential scanning calorimeter (DSC) and ultraviolet-visible spectroscopy (UV-Vis spectroscopy). X-ray diffraction peaks at 29.53°, 36.34°, and 42.22° indicated the presence of cuprous oxide nanoparticles, having high dispersions and limited size distributions. The estimated average size of Cu2O nanoparticles was ~ 17.1525 nm. A characteristic peak at around 2θ = 18.5° was attributed to periodical parallel and perpendicular polymer chains, which denoted the formation of PANI. SEM results indicated the symmetrical dispersion of Cu2O nanoparticles inside the hybrid polymer of PVA and PANI matrix, being potentially useful for encapsulation and acting as a good capping agent. FTIR results established the formation of PANI and Cu2O with nanocrystalline nature. DSC results revealed the appearance of one single peak of Tg which decreased with Cu2O content of 4% wt, followed by an increase of that value by increasing Cu2O content up to 16%wt. Thermogram analysis of the PANI and PVA embedded with Cu2O form showed an exothermic peak at (240-292)°C affiliated to the cross-linking reaction, while the Tm value of prepared nanocomposites is just about close to that of PVA polymer. The results indicated that there is an increase in thermal stability due to the presence of Cu2O NPS within the matrix of polymers. The distinguishing peaks at 330, 347, and 457 nm which refer to PANI are assigned to π−π* electron transitions among the benzenoid rings. The high absorption intensity of the peak at 470 nm for the blended PVA+PANI having 12% wt of Cu2O NPS is assigned due to the inter-band transitions for electrons of the core copper as well as copper oxide. This points out that the increasing quantity of Cu2O NPs leads to increases in the amounts of highly oxidized structures in PANI and decreases in the doping electrons and length of conjugation throughout the incorporation of Cu2O NPs into PANI matrix. Depending on the practical results, it can be said that these polymeric nanocomposites can be efficiently used in photovoltaic technology applications.

A facile one pot synthesis of highly stable PVA–CuO hybrid nanofluid for heat transfer application

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Design, synthesis, and characterization of stable copper nanofluid with enhanced thermal conductivity

An experimental study on characterization, stability and dynamic viscosity of CuO-TiO2/water hybrid nanofluid

Ultrasound assisted one pot synthesis of nano-sized CuO and its nanocomposite with poly(vinyl alcohol)

One-step synthesis of Cu/Therminol VP-1 nanofluids by phase transfer method and their thermal stability and thermophysical properties

Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach

In-situ synthesis of cuprous oxide nanofluid using ribose for enhanced thermal conductivity and stability

Synthesis of Blend Polymer (PVA / PANI)/Copper (1) Oxide Nanocomposite: Thermal Analysis and UV-Vis Spectra Specifications

Fructose-mediated single-step synthesis of copper nanofluids with enhanced stability and thermal conductivity for advanced heat transfer applications

Cu-Graphene water-based hybrid nanofluids: synthesis, stability, thermophysical characterization, and figure of merit analysis

Comparative experimental and theoretical study of thermal and rheological features of Cu/PAM/DW and water/PAM/SiO2 individual polynanofluids

Study on Enhanced Heat Transfer and Stability Characteristics of Al2O3–SiO2/Water Hybrid Nanofluids

Thermal Conductivity and Stability of Hydrocarbon-Based Nanofluids with Palladium Nanoparticles Dispersed by Modified Hyperbranched Polyglycerol

Structural, optical, opto-thermal and thermal properties of ZnS–PVA nanofluids synthesized through a radiolytic approach

One‐step polymerization of polyvinyl alcohol/cashew gum/polypyrrole/copper oxide nanocomposites for high‐performance flexible films in optoelectronics

Preparation and thermo-physical properties of stable graphene/water nanofluids for thermal management

Enhancing the Structural, Optical, Thermal, and Electrical Properties of PVA Filled with Mixed Nanoparticles (TiO2/Cu)

Synthesis, characterization and dispersion stability of water-based Cu–CNT hybrid nanofluid without surfactant

Hydrophilic Cu-Graphene Heterostructure Fillers for the Enhancement of the Thermal Performance of Poly(vinyl Alcohol)-Based Composites

Investigations on the thermal and electrical conductivity of polyethylene glycol-based CuO and ZnO nanofluids