Abstract:Abstract Cupronickel alloys have found widespread use in various applications such as heat exchangers, refrigeration systems, equipment, pumps, and pipes. However, the inherent structure of cupronickel alone may not be able to withstand certain aggressive environments effectively. To address this issue, the mechanical properties and corrosion resistance of cupronickel alloys can be enhanced by carefully selecting the appropriate alloying compositions. The addition of nano chromium (20 nm) has been proposed as a means of designing cupronickel alloys with improved performance. In the present study, corrosion and erosion–corrosion behaviors of cupronickel 70/30 alloys produced by the casting method without and with three different additions of nano Cr (1, 1.2, and 1.5 wt%) were investigated. The prepared specimens were subjected to electrochemical tests in 3.5 wt% sodium chloride solutions to evaluate their corrosion behavior. Additionally, an erosion–corrosion test was conducted at an impact angle of 90°, using a slurry solution containing 1 wt% SiO 2 sand in 3.5 wt% NaCl solution as the erodent. The specimens were comprehensively characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction techniques. The surfaces of the alloy specimens exhibited superficial attacks, but no pits were observed. Moreover, the surfaces developed a greenish coloration. The electrochemical tests conducted using saline solution revealed that the corrosivity of the cupronickel alloy with nano chromium addition varied from moderate to low, depending on the selected concentration. Despite undergoing corrosion in the saline environment, the modified cupronickel alloys demonstrated good resistance to this corrosive process. Therefore, they can be considered suitable for use in highly aggressive environments, such as in seawater capture systems. The erosion–corrosion test results indicated that the addition of nano chromium significantly enhanced the resistance of the specimens to erosion–corrosion. At 1.5 wt% Cr, the erosion–corrosion rate was reduced by 99.27%.

Comparative evaluation of corrosion effects between nanocrystalline silver alloy and tradition gold stacks using spring probe contacts

Electrochemical Corrosion Behavior and Surface Passivation of Bulk Nanocrystalline Copper in Alkaline Solution

An electrochemical study on corrosion behavior of three alloys in artificial saliva with different pH

Corrosion effects and reliability improvement of silver wire bonded contacts in automotive application

Effect of Thermal Aging on the Reliability of Interconnected Nano-Silver Solder Joints

Failure stress comparison of different pairings of Ag-plating and reflow-oven-processed pressureless-sintered-Ag interconnects

Corrosion Behaviors of Nanocrystalline and Conventional Polycrystalline Copper

The Corrosion Behavior of Different Silver Plating Layers as Electrical Contact Materials in Sulfur-Containing Environments

Mode I fracture of sintered nano-silver doped with nickel-coated multiwall carbon nanotube

Galvanic coupling of steel and gold alloy lingual brackets with orthodontic wires: Is corrosion a concern?

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Effects of Current Load on Wear and Fretting Corrosion of Gold-Plated Electrical Contacts

Numerical evaluation of the mechanical response of Sn-Ag-Cu lead-free solders of various silver contents

Predicting Galvanic Corrosion of Aluminum Using Accelerated Laboratory Electrochemical Experiments

Comparison of Corrosion Behavior Between Coarse Grained and Nanocrystalline Ni Fe Alloys in Chloride Solutions and Proton Exchange Membrane Fuel Cell Environment by EIS, XPS and Raman Spectra Techniques

Comparative Study on Corrosion Resistance and in Vitro Biocompatibility of Bulk Nanocrystalline and Microcrystalline Biomedical 304 Stainless Steel.

Influence of crystalline Zn-Ag nanoalloy electrodeposits on their anti-corrosion and hardness performance in engineering applications

Comparison of Interface Evolution of Ultrasonic Aluminum and Gold Wire Wedge Bonds During Thermal Aging

Comparison of the Resistivities of Nanostructured Films Made from Silver, Copper-Silver and Copper Nanoparticle and Nanowire Suspensions

Influence of nano chromium addition on the corrosion and erosion–corrosion behavior of cupronickel 70/30 alloy in seawater

Resistance to Electrical Corrosion of Au-Cu Alloy Coatings for Electronic Contacts