Abstract:Owing to the reduced defects, low cost, and high efficiency, the additive manufacturing (AM) technique has attracted increasingly attention and has been applied in high-entropy alloys (HEAs) in recent years. It was found that AM-processed HEAs possess an optimized microstructure and improved mechanical properties. However, no report has been proposed to review the application of the AM method in preparing bulk HEAs. Hence, it is necessary to introduce AM-processed HEAs in terms of applications, microstructures, mechanical properties, and challenges to provide readers with fundamental understanding. Specifically, we reviewed (1) the application of AM methods in the fabrication of HEAs and (2) the post-heat treatment effect on the microstructural evolution and mechanical properties. Compared with the casting counterparts, AM-HEAs were found to have a superior yield strength and ductility as a consequence of the fine microstructure formed during the rapid solidification in the fabrication process. The post-treatment, such as high isostatic pressing (HIP), can further enhance their properties by removing the existing fabrication defects and residual stress in the AM-HEAs. Furthermore, the mechanical properties can be tuned by either reducing the pre-heating temperature to hinder the phase partitioning or modifying the composition of the HEA to stabilize the solid-solution phase or ductile intermetallic phase in AM materials. Moreover, the processing parameters, fabrication orientation, and scanning method can be optimized to further improve the mechanical performance of the as-built-HEAs.

High-entropy alloys fabricated via powder metallurgy. A critical review

Powder metallurgy of high-entropy alloys and related composites: A short review

High entropy alloys: A review of preparation techniques, properties and industry applications

High-Entropy Alloys: A Critical Review

High entropy alloy synthesis, characterisation, manufacturing & potential applications: a review

High Entropy Alloys: The Materials of Future

High-entropy alloy: challenges and prospects

An Overview of High-Entropy Alloys Prepared by Mechanical Alloying Followed by the Characterization of Their Microstructure and Various Properties

Properties and Processing Technologies of High-entropy Alloys

A critical review on mechanically alloyed high entropy alloys: processing challenges and properties

Powder metallurgy processing of high entropy alloys: Bibliometric analysis and systematic review

Exploring the Potential of High Entropy Alloys: A Comprehensive Review on Microstructure, Properties, and Applications

High-entropy Alloys: an Overview on the Fundamentals, Development, and Future Perspective

Advancements and future prospects of additive manufacturing in high-entropy alloy applications

Science and technology in high-entropy alloys

Development of competitive high-entropy alloys using commodity powders

Development of high entropy alloys (HEAs): Current trends

Alloy Design Strategies and Future Trends in High-Entropy Alloys

Recent Progress in High‐entropy Nanocatalysts

Additive Manufacturing of High-Entropy Alloys: A Review

Mechanically alloyed high entropy alloys: existing challenges and opportunities