Abstract:To address the issue of centrifugal force affecting the vertical load during the stability and trajectory planning of autonomous vehicles during high-speed cornering and obstacle avoidance, a model predictive control of trajectory planning and tracking is proposed that considers the roll factor using only a two-degrees-of-freedom vehicle dynamics model. Firstly, a trajectory planning controller is designed. As a predictive model, a dual-track two-degrees-of-freedom vehicle dynamics model is established. This model describes the relationship between tire lateral forces and vertical loads using a quadratic nonlinear tire model. To reflect the actual dynamic state of the vehicle, the controller incorporates a nonlinear constraint that considers vertical load variations. The nonlinear optimization problem is transformed into a simplified quadratic programming problem by using the Jacobian matrix method to linearize the constraints. By fitting a fourth-degree polynomial curve to the discrete points calculated by the replanning algorithm, an optimal collision-free trajectory is obtained. Secondly, an MPC trajectory tracking controller is designed to control the vehicle in real time along the optimal trajectory from the planning, incorporating control quantity constraints, control increment constraints, and lateral angle constraints to maintain the vehicle's motion state. We transform the trajectory tracking control problem into a quadratic programming problem, solving for the optimal control sequence for the autonomous vehicle to track the trajectory, achieving an optimized solution and rolling time domain control. Finally, the effectiveness of the vehicle's obstacle avoidance planning and tracking under high-speed double-lane-change maneuver conditions is validated using the Simulink simulation platform. The results indicate that the designed planning and tracking controllers effectively improve the obstacle avoidance planning and tracking control for high-speed autonomous vehicles.

Trajectory Planning and Tracking for Autonomous Vehicle Based on State Lattice and Model Predictive Control

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Integrated Avoid Collision Control of Autonomous Vehicle Based on Trajectory Re-Planning and V2V Information Interaction

Trajectory planning for vehicle collision avoidance imitating driver behavior

Trajectory Tracking Control for Autonomous Driving Vehicle with Obstacle Avoidance: Modeling, Simulation, and Performance Analysis

Path Planning and Tracking for Vehicle Collision Avoidance Based on Model Predictive Control With Multiconstraints

Personalized motion planning and tracking control for autonomous vehicles obstacle avoidance

A Safe Motion Planning and Reliable Control Framework for Autonomous Vehicles

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Model predictive trajectory optimization and tracking for on-road autonomous vehicles

Four-wheel-drive vehicle trajectory tracking control at joint planning layer

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

A Learning-Based Model Predictive Trajectory Planning Controller for Automated Driving in Unstructured Dynamic Environments

Path Tracking and Handling Stability Control Strategy With Collision Avoidance for the Autonomous Vehicle Under Extreme Conditions

Lane Detection and Trajectory Tracking Control of Autonomous Vehicle Based on Model Predictive Control

Model Predictive Control for Trajectory Planning Considering Constraints on Vertical Load Variation

Online Active Set-Based Longitudinal and Lateral Model Predictive Tracking Control of Electric Autonomous Driving

Path Planning and Path Tracking for Collision Avoidance of Autonomous Ground Vehicles

Post-Impact Motion Planning and Tracking Control for Autonomous Vehicles