Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to improve the path tracking performance and stability of intelligent vehicles during steering and collision avoidance working condition, an integrated control method combining four-wheel steering, active suspension and direct yaw-moment is proposed. Firstly, a unified chassis dynamics model with 18 degrees-of-freedom (DOF) is established, which includes steering, braking and suspension subsystems. Phase plane analysis results for both traditional 2-DOF bicycle model and the 18-DOF model are compared. The results show that although the uneven road has a certain influence on the phase portraits of sideslip angle and sideslip angular velocity of the 18-DOF model, the overall trend is consistent with those of the 2-DOF model. Secondly, a general control framework for steering and collision avoidance of autonomous vehicle is put forward, consisting of the steering control for path tracking, and active suspension and direct yaw-moment control for stability. The collision avoidance reference path is planned by the fifth-degree polynomial, and three types of steering control methods including optimal control front wheel steering, optimal control four-wheel steering and front wheel steering combined with feedforward and feedback control, are adopted for comparison. The main contribution of this paper is that the role of active suspension is considered in the path tracking and stability integrated control of intelligent vehicles under steering collision avoidance. The active suspension subsystem uses optimal control method by two different kinds of weight coefficients, which can be switched between "comfort mode" and "sport mode" based on the vehicle lateral acceleration. According to the phase portraits of vehicle center of gravity sideslip angle and sideslip angular velocity, the direct-yaw moment control system adopts proportional differential control method based on the distance from the state point to the stability boundary. Finally, simulations and comparative analysis are compared among four different control systems on high and low adhesion roads. The research results indicate that the integrated control system can improve the vehicle path tracking performance and stability significantly.

Path Tracking and Handling Stability Control Strategy With Collision Avoidance for the Autonomous Vehicle Under Extreme Conditions

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

NMPC-based Path Tracking Control Strategy for 4WID Autonomous Vehicle Considering Handling Stability Under Extreme Conditions

An Emergency Collision-Avoidance Controller for Distributed Drive Autonomous Vehicles Based on AFS and DYC

Supervisory Control Strategy for AVs under Unexpected Emergency Conditions

Path Planning and Obstacle Avoidance Control for Autonomous Multi-Axis Distributed Vehicle Based on Dynamic Constraints

Path Planning and Path Tracking for Collision Avoidance of Autonomous Ground Vehicles

Integrated longitudinal and lateral control for autonomous vehicles with active load transfer strategy at the handling limits

Adaptive Coordinated Path Tracking Control Strategy for Autonomous Vehicles with Direct Yaw Moment Control

Integrated Path Tracking for Autonomous Vehicle Collision Avoidance Based on Model Predictive Control with Multi-constraints

Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Path tracking coordinated control strategy for autonomous four in-wheel-motor independent-drive vehicles with consideration of lateral stability

Emergency steering control of autonomous vehicle for collision avoidance and stabilisation

Integrated Avoid Collision Control of Autonomous Vehicle Based on Trajectory Re-Planning and V2V Information Interaction

Nonlinear model predictive control for trajectory-planning and tracking based on tilting technology to achieve vehicle obstacle avoidance

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

Robust Coordination Control of AFS and ARS for Autonomous Vehicle Path Tracking and Stability

Integrated Path Following and Lateral Stability Control of Distributed Drive Autonomous Unmanned Vehicle

Cooperative Strategy of Trajectory Tracking and Stability Control for 4WID Autonomous Vehicles under Extreme Conditions