Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The ride comfort is a key research area for the quality improvement of railway vehicles. Several control methods have been developed to improve the ride comfort, in which the semi-active control approach inherits the advantages of passive and active control approaches. However, the semi-active control may perform ineffectively in vibration attenuation when the carbody load changes. To address this issue, we proposed a novel hybrid control method that combines the skyhook (SH) and displacement velocity (DV) control methods to reduce vibrations of the carbody in the lateral direction under carbody load changes. First, a hybrid control model built in Matlab software was applied to a quarter railway vehicle model for a preliminary assessment of the ride comfort. Second, to provide a more comprehensive evaluation, the proposed model was applied to a whole railway vehicle model using co-simulation (Matlab-Simpack). In the quarter model, under the sinusoidal excitation, the hybrid control showed a lower acceleration by 48.5% and 42.8% when the carbody load reduced to a half and a quarter, respectively, compared to the passive control. This finding was confirmed with the whole model. Moreover, in the whole model, under the track irregular excitation, the hybrid control showed a lower acceleration by 26.6% and 17.4% when the carbody load reduced to a half and a quarter, respectively. Further, the proposed method showed an acceptable safety level, measured by the derailment coefficient (0.0743 at a half load and 0.089 at a quarter load). In conclusions, the proposed hybrid SH-DV control exhibits high robustness, adaptability, effectiveness, and acceptable safety level in response to variations in body load.

Damping Multimode Switching Control of Semiactive Suspension for Vibration Reduction in a Wheel Loader

Variable universe fuzzy control of the wheel loader semi-active cab suspension with multimode switching shock absorber

Analysis of damping multi-mode switching control of semi-active suspension based on digital controlled hydraulic cylinders group

Wheel loader seat damping control research based on ADRC

On Fuzzy Control Strategy of Nonlinear Semi-Active Suspension System

Control and Simulation of Semi-Active Suspension Based on MRF Damper

Semi-active fuzzy cooperative control of vehicle suspension with a magnetorheological damper

Switching Control of Semi-Active Suspension Based on Road Profile Estimation

Semi-active Bounded Optimal Control of Uncertain Nonlinear Coupling Vehicle System with Rotatable Inclined Supports and MR Damper under Random Road Excitation

Hybrid model predictive control on lifting and dropping vehicle body via asymmetric damping adjustment

Sliding Mode Varying Structure Control for Semi-active Suspension

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

Step-control and Vibration Characteristics of a Hybrid Vehicle Suspension System Considering Energy Consumption

Takagi–Sugeno Fuzzy Model-Based Control for Semi-Active Cab Suspension Equipped with an Electromagnetic Damper and an Air Spring

Multi-mode Switching Control of Hybrid Electromagnetic Suspension Based on Road Conditions Adaptation

Research on the Multimode Switching Control of Intelligent Suspension Based on Binocular Distance Recognition

Sliding Mode Control of Semi-active Suspension Based on Reference Model

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

Semi-Active Suspension Adaptive Control Strategy Based on Hybrid Control

Fuzzy-PID Switch Control on Semi-active Suspensions with MR Damper