Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Numerical study of a laser generated cavitation bubble based on FVM and CLSVOF method

Numerical Investigation of Multi Rising Bubbles Using a Coupled Level Set and Volume of Fluid (CLSVOF) Method

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Numerical Study of the Collapse of Multiple Bubbles and the Energy Conversion During Bubble Collapse

Numerical simulation on motion of bubble under water

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Numerical study of laser-induced cavitation bubble with consideration of chemical reactions

Numerical Study of the Kinematic and Acoustic Characteristics of Bubble Clusters

Numerical Simulations of Bubble Formation and Acoustic Characteristics from a Submerged Orifice: the Effects of Nozzle Wall Configurations

Numerical Simulation of Micro Bubble Collapse Near Solid Wall in Fluent Environment

Numerical Analysis of Single Pulsating Bubble Interaction with a Free Surface in a Viscous Compressible Liquid

Numerical investigation on the cavitation instability induced by local collapse around a 2D CLARK-Y hydrofoil

Numerical Investigation on the Collapse of a Bubble Cluster Near a Solid Wall

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Direct numerical simulation of deformable rising bubbles at low Reynolds numbers

Numerical investigation of the cavitation bubble near the solid wall with a gas-entrapping hole based on a fully compressible three-phase model

Numerical and experimental investigations on the jet and shock wave dynamics during the cavitation bubble collapsing near spherical particles based on OpenFOAM

Simulating cavitation over different scales and regimes

Experimental and numerical investigations of the collapse of a laser-induced cavitation bubble near a solid wall

Numerical simulation of gas-liquid two-phase flow impacting fixed structure by CLSVOF/IB method based on OpenFOAM

Numerical simulation of single bubble condensation in subcooled flow using OpenFOAM