Abstract:Abstract In nuclear power plants, power actuated pressure relief valves serve several purposes. They act as safety valves and open automatically in response to unusually high pressures in the primary system. They also act as power-operated valves and are used to relieve steam in response to automatic or manually initiated control signals. These valves are required to lift completely over a short duration from the time that they receive an actuation signal, or the system pressure exceeds the set point. This short lift time results in the valve disk moving at high velocities, and can result in high impact forces on the piston and stem when the valve fully opens. To quantitatively evaluate the dynamic performance of the Target Rock Pressure Relief Valve, an analysis effort was undertaken which would accommodate both the fluid dynamic features of the valve operation, as well as the kinematic characteristics of the valve, during pressure relief valve operation. To execute the analysis, the Generalized Fluid System Simulation Program (GFSSP) was used. GFSSP is a network flow solver computational fluid dynamics (CFD) code developed by NASA that has the ability to analyze transient, multiphase flows, and conjugate heat transfer, along with the inclusion of custom user subroutines developed by the user which can accommodate other simulation requirements. In this paper, we present the GFSSP model developed, and the computed results that could be compared with corresponding parameters as measured from experimental testing for the pressure relief valve. Adjustments to GFSSP input parameters allow the anchoring of the GFSSP valve model to test data. This makes it possible to use the GFSSP model as a predictive tool for understanding valve dynamics, as well as evaluating proposed pressure relief valve modifications for performance improvements.

Simulation of Dynamic Characteristic of Reverse Pressure Relief Valve with AMESim

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

The Design and Analysis of Multi-Stage Pressure Relief Valve with Hydraulic Resistance Network

Modeling, simulation and experimental research on pressure tracking valve

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Numerical Simulation and Analysis of the dynamic Behaviours on the Spring-loaded Pressure Relief Valve

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Research on Dynamic Characteristics of the Rotary Valve.

Clearance Leakage in High Pressure Pneumatic Relief Valve with Slide Pilot

Numerical Analysis about the Dynamic Properties of a Pressure Relief Valve and Improvement Measures

Simulation and Experimental Study of High Pressure Switching Expansion Reduction Considering Real Gas Effect

Simulation Of Controllable Pressure-Clearance Characteristic Of A High Pressure Pneumatic Chamber

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Simulation and Research of Pressure Regulator Valve in Boiler Feed-water Turbine Governing System

Simulation Modeling and Analysis of Hydraulic Steering System with Flow Amplification Based on AMESim

Research on Dynamic Characteristics of Deep Sea Pressure Compensator

Modeling and characteristics investigation on a new pneumatic proportional pressure valve

Dynamic Analysis of a High-Pressure Relief Valve During Opening

Modeling and Simulation Analysis of Speed-Regulating Valve Flow Fluctuations under Differential Pressure Steps

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System