Abstract:The extensive application of ceramic membranes in wastewater treatment draws increasing attention due to their ultra-long service life. A cost-effective treatment for high-strength swine wastewater is an urgent and current need that is a worldwide challenge. A pilot-scale sequencing batch flat-sheet ceramic membrane bioreactor (ScMBR) coupled with a short-cut biological nitrogen removal (SBNR) process was developed to treat high-strength swine wastewater. The ScMBR achieved stable and excellent removal of COD (95.3%), NH4+-N (98.3%), and TN (92.7%), though temperature went down from 20 °C, to 15 °C, to 10 °C stepwise along three operational phases. The COD and NH4+-N concentrations in the effluent met with the discharge standards (GB18596-2001). Microbial community diversity was high, and the genera Pseudomonas and Comamonas were dominant in denitritation, and Nitrosomonas was dominant in nitritation. Ceramic membrane modules of this pilot-scale reactor were separated into six layers (A, B, C, D, E, F) from top to bottom. The total filtration resistance of both the top and bottom membrane modules was relatively low, and the resistance of the middle ones was high. These results indicate that the spatial distribution of the membrane fouling degree was different, related to different aeration scour intensities demonstrated by computational fluid dynamics (CFD). The results prove that the membrane fouling mechanism can be attributed to the cake layer formation of the middle modules and pore blocking of the top and bottom modules, which mainly consist of protein and carbohydrates. Therefore, different cleaning measures should be adopted for membrane modules in different positions. In this study, the efficient treatment of swine wastewater shows that the ScMBR system could be applied to high-strength wastewater. Furthermore, the spatial distribution characteristics of membrane fouling contribute to cleaning strategy formulation for further full-scale MBR applications.

Silicon Carbide-Coated Ceramic Membrane Bioreactor for Sustainable Water Purification

Extrusion of Silicon Carbide Based Tubular Membrane Incorporated With Coal Fly Ash and Performance Evaluation in Water Treatment

SiO2 Modification of Silicon Carbide Membrane via an Interfacial In Situ Sol–Gel Process for Improved Filtration Performance

Permeability Behavior and Wastewater Filtration Performance of Mullite Bonded Porous SiC Ceramic Membrane Prepared Using Coal Fly Ash as Sintering Additive

Silicon carbide ceramic membrane support sintered at 800 °C with low-temperature sintering aid

Treatment of semiconductor-industry wastewater with the application of ceramic membrane and polymeric membrane

Ceramic Processing of Silicon Carbide Membranes with the Aid of Aluminum Nitrate Nonahydrate: Preparation, Characterization, and Performance

Mesoporous SiC-Based Photocatalytic Membranes and Coatings for Water Treatment

Development of a new composite ceramic membrane from mullite, silicon carbide and activated carbon for treating greywater

Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment

Silicon carbide catalytic ceramic membranes with nano-wire structure for enhanced anti-fouling performance

Coke oven wastewater treatment using polymeric and ceramic membranes

Electrocoagulation coupled with conductive ceramic membrane filtration for wastewater treatment: Toward membrane modification, characterization, and application

Ceramic Membrane Bioreactor for Low Carbon Source Wastewater Treatment: Process Design Performance and Membrane Fouling

Mechanism Study on the Effect of Surface Electrical Property on Microbial Membrane Formation Efficiency of TiO2-SiC Composite Filler in Recirculating Aquaculture System

Wastewater treatment using moving bed biofilm reactor technology: a case study of ceramic industry

Fabrication of high-performance recrystallized silicon carbide ceramic membrane based on particle packing optimization

Tuning Microstructures and Separation Behaviors of Pure Silicon Carbide Membranes

The Performance and Spatial Distribution of Membrane Fouling in a Sequencing Batch Ceramic Membrane Bioreactor: A Pilot Study for Swine Wastewater Treatment

Facile Pyrrole Oxidative Polymerization with Ionic Liquid to Modify Ceramic Membrane for Sustainable Fouling Control

Fouling behaviour of industrial waste-based ceramic membrane in anaerobic membrane bioreactor treating low strength wastewater