Kumarpalsinh A Jadeja,Joydeep Ghosh,Kaushal Patel,Ankit B Patel,R L Tanna,Kiran Patel,Bharat Arambhadiya,Kalpesh Galodiya,Rohit Kumar,Suman Aich,Harshita Raj,Laxmikanta Pradhan,Malay Bikas Chowdhuri,Ranjana Manchanda,Nilam Ramaiya,Nandini Yadava,Sharvil Patel,Kajal Shah,Dipexa Modi,Aman Gauttam,Kaushlender Singh,Suman Dolui,Ankit Kumar,Bharat Hegde,Ashok Kumar Kumawat,Minsha Shah,Rachana Rajpal,Umesh Nagora,P K Atrey,Surya Kumar Pathak,Shishir Purohit,Asha Adhiya,Manoj Kumar Gupta,Kumudni Asudani,Devilal Kumavat,S Kumar Jha,Kunal S Shah,Moti Makwana,Shivam Gupta,Supriya Nair,Kishore Mishra,D Raju,P K Chattopadhyay,Bharat Kataria

Abstract:Effective control of impurities and precise regulation of the fuelling gas are supreme prerequisites for optimal operation in any fusion device. Conventional wall conditioning methods fall short in achieving extremely better wall conditioning. The conventional wall conditioning methods like vessel baking, H2 (D2) fuelled glow discharge cleaning (GDC) are required in general to remove wall-absorbed impurities in bulk after a vessel venting. The excess amount of hydrogen, injected during H2-GDC can be reduced by helium fuelled GDC. However, helium removing from the vessel is more challenging due to its low molecular mass, very low condensation temperature, and inert characteristics. In ADITYA-U, the optimal wall conditioning cannot be achieved using H2 followed by Helium (He) fuelled GDC when applied for extended periods spanning hours or days. A GDC with mixing of argon and hydrogen is introduced in ADITYA-U tokamak to obtain the better wall conditioning then the H2 followed by He GDC. In Ar-H2 GDC, the long lived ArH+ ions are formed in sufficient amount and accelerated toward vessel wall with high momentum. This results in breaking of high energy bonds of impurities with the wall/PFCs which is not possible by H+, H2+, H3+ ions in H2-GDC due to their lower momentum. The optimal blend ratio of Ar to H2 has been established at 15-20% for the mixture. This composition ensures that the introduction of high-Z argon does not adversely affect tokamak plasma operations. The carbon and oxygen contained impurities have been reduced beyond the limit of the prolonged operation of H2-GDC. The relative low pressure of dominant impurities like CO, CH4, and H2O have been obtained due to the Ar-H2 GDC compare to routinely operated H2-GDC. A comparison study of H2-GDC and developed Ar-H2 GDC has been performed in terms of wall conditioning and tokamak plasma operation. The encouraging results of the Ar-H2 GDC have been obtained in both the scenarios of wall cleaning and tokamak operation in the midsize tokamak ADITYA-U. This development and application of Ar-H2 GDC are beneficial for large-size fusion devices, leading to improved impurity reduction, reduced operational fuel consumption (H2/D2/He), and enhanced control over fuel recycling/extraction.

Particle balance investigation with the combination of the hydrogen barrier model and rate equations of hydrogen state in long duration discharges on an all-metal plasma facing wall in QUEST

Present Progress of Plasma Transport Study on HL-2A

Observation of a Spontaneous Particle-Transport Barrier in the HL-2A Tokamak.

Overview of Hl-2a Experiment Results

Plasma performance enhancement and impurity control by novel technique of argon-hydrogen mixture fueled glow discharge wall conditioning in ADITYA-U tokamak

1 EX / P 5-24 Observation of a Natural Particle Transport Barrier in HL-2 A Tokamak

Overview of Experimental Results on the HL-2A Tokamak

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Plasma behaviour with hydrogen supersonic molecular beam and cluster jet injection in the HL-2A tokamak

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Impact of Impurity Mixture Gas Seeded by Supersonic Molecular Beam Injection on Edge-Localized Modes in the HL-2A Tokamak

ENERGY, MOMENTUM AND PARTICLE BALANCES OF ELECTRONS IN LOWER HYBRID WAVE SUSTAINED PLASMAS ON THE TST-2 SPHERICAL

Overview of Large Helical Device experiments of basic plasma physics for solving crucial issues in reaching burning plasma conditions

Overview of the Latest HT-7 Experiments

Electron heating of over-dense plasma with dual-frequency electron cyclotron waves in fully non-inductive plasma ramp-up on the QUEST spherical tokamak

Confinement and Heating of a Deuterium-Tritium Plasma

Initial testing of ohmic heating through double flux swing during electron cyclotron start-up in the QUEST spherical tokamak

Influence of helium bubbles location on hydrogen isotope retention and exchange behavior in plasma-facing materials: a numerical simulation investigation

Hydrogen content in divertor baffle tiles in Wendelstein 7-X

Investigation of Impurity Confinement in Lower Hybrid Wave Heated Plasma on EAST Tokamak

1 TH / 4-4 Collective Effects and Self-Consistent Energetic Particle Dynamics in Advanced