Abstract:The present study is an experimental work carried on for surface modification of Ti6Al4V alloy using TiC/Cu powder metallurgy (P/M) electrode. Both, machine and tool parameters were selected for study, and these experiments were planned as per Taguchi’s L18 mixed orthogonal array. Optimal combination of parameters was obtained using Taguchi’s method, and analysis of variance was performed to evaluate the influence of parameters on surface roughness (SR) and micro-hardness (MH). Peak current, particle size and pulse on time were found to be the most significant accordingly on both SR and MH. High reactive surface area of nanoparticles made greater surface alloying than the other tool electrodes and has shown its influence positively on both SR and MH. The EDS analysis reveals the migration of Ti and Cu elements, deposition of carbon and diffusion of oxygen particles on the surface. The XRD spectrum confirms the presence of carbides (TiC, Ti2C\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\hbox {Ti}_{2}\mathrm{C}$$\end{document}, Fe5C2\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\hbox {Fe}_{5}\mathrm{C}_{2}$$\end{document} and Fe3C\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\hbox {Fe}_{3}\mathrm{C}$$\end{document}) and oxides (TiO and Ti3O\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\hbox {Ti}_{3}\mathrm{O}$$\end{document}) at different machining conditions which indicates the influence of TON and IP on discharge energies and in turn on the properties of machined surface. The carbides, generated on the machined surface, increased the hardness as high as 912 HV, without much sacrifice of the roughness of the machined surface. The range of roughness values obtained in the present investigation is 1.88–4.449 μm\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\upmu \hbox {m}$$\end{document}.

Optimization of Process Parameters of Electrochemical Machining of TiC-Reinforced AA6063 Composites

Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Synthesis of AA8050/B4C/TiB2 Hybrid Nanocomposites and Evaluation of Computer-Aided Machining Parameters

Exploring wide-parametric range for tool electrode selection based on surface characterization and machining rate employing powder-mixed electric discharge machining process for Ti6Al4V ELI

Electrochemical Turning of (TiB + TiC)/TC4 Composites Using a Rectangular Cathode

Machinability investigation and surface modification of nano-TiB2 and AlN grafted MWCNT hybridized Al 7075 matrix ternary composite through powder-mixed EDM

Simulation and Experimental Investigation on Electrochemical Milling of TiB2/7050 Aluminum Matrix Composites

Synthesis of Stir-Cast AA7050/5%B4C Composite and Optimization of EDM Response Parameters Using Taguchi Analysis

Investigation and optimization in electrochemical arc drilling of Ni55.7Ti nickel–titanium shape memory alloy with molybdenum electrode

TAGUCHI-GREY OPTIMIZATION OF SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE ON ELECTRO-DISCHARGE MACHINING OF NOVEL AA7075-TiO2 METAL MATRIX COMPOSITE USING WASTE CORNCOB BIOSILICA DIELECTRICS

Analysis of Wire-cut Electric Discharge Machining Behaviour of AA6061 / C / ZrO2 Hybrid Nano Composites using Taguchi's method

Optimization by AHP-ARAS of EDM Process Parameters on Machining AA7050-10%B4C Composite

Electric Discharge Machining of Ti6Al4V ELI in Biomedical Industry: Parametric Analysis of Surface Functionalization and Tribological Characterization

Simulation Analysis and Experimental Validation of Cathode Tool in Electrochemical Mill-Grinding of Ti6Al4V

Investigating Technological Parameters and TiN-Coated Electrodes for Enhanced Efficiency in Ti-6Al-4V Micro-EDM Machining

Optimization of Machining Process on Coated Tungsten Carbide Electrode Tool and Titanium Alloy Workpiece Using EDM: A Critical Review

Surface Modification of Ti6Al4V Alloy Using EDMed Electrode Made with Nano- and Micron-Sized TiC/Cu Powder Particles

Experimental examination on electrochemical machining of Mg/FeCoCrNiMn composite

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Parameter optimization in the enhancement of MRR of titanium alloy using newer mixing method in PMEDM process