Abstract:Wind Engineering, Ahead of Print. Fluid-structure interaction (FSI) studies have become an important tool in the development of wind turbine blades as well as for analyzing and optimizing Horizontal Axis Wind Turbine (HAWT). The most essential elements for estimating the turbine blade strength to withstand extreme wind loads and aerodynamic performance are the blade deformation and the associated stresses. This study aims to compare the strength and analyze the deformation behavior of two models of HAWT blades. A three-dimensional model was created and loaded into a Finite Element (FE) model for analysis. The Computational Fluid Dynamics (CFD) investigation was coupled with the structural model using one-way FSI. In this article, the effect of the aerodynamics on the blade surface of a small HAWT has been studied numerically and experimentally. The airfoil used for the blade profile is S826 airfoil. To provide an appropriate displacement for static measurements, the blade in the experimental investigation is made of thermoplastic polyurethane material (TPU). It is noted that the current experimental findings verify the simulation results, and a comparison between the simulations and the experimental findings reveals a reasonable agreement. The numerical simulations are also implemented on a HAWT epoxy E-glass unidirectional (EEGUD) material. It can be concluded from this study that the blade deformation and stress on the blades are related to the wind speed. The deformation along the span length exhibits nonlinear variation that gradually increases from the blade root and reaches its maximum at the blade tip position. The tip deflection and equivalent stress were found to increase with an increase in wind speed. The dynamic analysis at different tip speed ratios shows the highest deformation at λ = 4, for wind speed of 20 m/s.

Fluid flow analysis of composite material-based wind turbine blades using Ansys

Strength Evaluation of the Composite Propeller under Hydrodynamic Fluid Load

Fluid-Structure Interaction of Wind Turbine Blade Using Four Different Materials: Numerical Investigation

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Aeromechanical Analysis of a Complete Wind Turbine Using Nonlinear Frequency Domain Solution Method

Integrated aerodynamic design and analysis of turbine blades

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Finite Element Analysis for Composite Blade Structure of Large Wind Turbine

Coupled Fluid-Structure Interaction Simulation of Two-Blade Wind Turbine

DESIGN AND ANALYSIS OF COMPOSITE PROPELLER BLADE FOR AIRCRAFT

Incorporating High-Fidelity Aerostructural Analyses in Wind Turbine Rotor Optimization

Design and static analysis of polymer composite wind turbine blade

Studying and analysis of deformation and stresses in horizontal-axis wind turbine using fluid-structure interaction method

Fluid–Structure Interaction Numerical Analysis of a Small, Urban Wind Turbine Blade

Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads

Performance analysis of composite laminates wing skin with the aid of fluid structure interaction of aerodynamic loading-structural analysis

Fluid–Structure Interaction Simulations of Wind Turbine Blades with Pointed Tips

Modal Analysis of Francis Turbine Blade Based on Fluid-Structure Interaction Theorem

Aerodynamic and structural analysis for blades of a 15MW floating offshore wind turbine

Structural analysis of offshore wind turbine blades using finite element method