Abstract:Near-field high-resolution synthetic aperture radar (SAR) imaging is mostly accompanied by a large number of data acquisition processes, which increases the system complexity and device cost. According to extensive reports, reducing the number of sampling points of a radar in space can greatly reduce the amount of data. However, when spatial sparse sampling is carried out, a ghost normally appears in the imaging results due to the high side lobes generated in the azimuth. To address this issue, a technique is introduced in this paper to recover the blank data through amplitude and phase compensation based on the correlation between sparse array sampling through adjacent points. Firstly, the data sampled by the sparse array is compressed in the range direction to obtain the expected data slices in the same range direction. Then, the blank element of the slice is compensated for with amplitude and phase to obtain full aperture data. Finally, the matched filter method is used to aid in the image reconstruction. The simulation results verified that the method proposed in this paper can effectively reconstruct the image under two kinds of sparse sampling conditions. Thus, a simple single-input single-output (SISO) synthetic aperture radar imaging test bench is established. Compared with the results of a 1 mm (1/4 λ) sampling interval, the quality of the reconstructed image under the condition of a 4 mm (1 λ) sampling interval still stands using our proposed method. Demonstrated by the experiment, the normalized root-mean-square error(NMSE) is 5.75%. Additionally, when the spatial sampling points are sampled randomly with 30% of the full sampling condition, this method can also restore and reconstruct the image with high quality. Due to the decrease of sampling points, the data volume can be reduced, which is beneficial for improving the scanning speed and alleviating the pressure of data transmission for near-field high resolution SAR imaging systems.

One-Bit SAR Imaging Based on Single-Frequency Thresholds

1-Bit Sar Imaging Assisted With Single-Frequency Threshold

Lightweight SAR: A Two-Bit Strategy

Generalization of Single-Frequency Threshold Based on 1-Bit Quantization in Synthetic Aperture Radar

A New SAR Imaging Method for Sparse Field Traget

Fast Target Perception Imaging of Spaceborne SAR in Sparse Field

One-Bit Radar Imaging Via Adaptive Binary Iterative Hard Thresholding

Enhanced One-Bit SAR Imaging Method Using Two-Level Structured Sparsity to Mitigate Adverse Effects of Sign Flips

1-Bit Radar Imaging Based on Adversarial Samples

Near-Field High-Resolution SAR Imaging with Sparse Sampling Interval

One-bit splitting deceptive jamming against SAR

Enhanced 1-Bit Radar Imaging by Exploiting Two-Level Block Sparsity

Design of Adaptive Thresholds For One-Bit Radar Imaging Based on Adversarial Samples

One-bit LFMCW Radar: Spectrum Analysis and Target Detection

An Improved Ultrahigh-Resolution Stepped-Frequency Spaceborne SAR Imaging Algorithm

A Novel Space-Borne High-Resolution SAR System with the Non-Uniform Hybrid Sampling Technology for Space Targets Imaging

High-Resolution and Wide-Swath Imaging of Spaceborne SAR Via Random PRF Variation Constrained by the Coverage Diagram

A Novel Spaceborne Sliding Spotlight Range Sweep Synthetic Aperture Radar: System And Imaging

Azimuth Spectrum Reconstruction Algorithm Based on Updating Factors Regionally for Onboard Real-Time Multichannel SAR Imaging

Staring Spotlight SAR with Nonlinear Frequency Modulation Signal and Azimuth Non-Uniform Sampling for Low Sidelobe Imaging

Blocked Azimuth Spectrum Reconstruction Algorithm for Onboard Real-Time Dual-Channel SAR Imaging