Abstract:Acoustical materials are usually used for architectural design, ambient noise, and traffic noise to absorb sound. The sound absorption coefficient (SAC) is often used as the performance index of acoustical materials. It is measured using the reverberation room method (RRM) and the impedance tube method (ITM). The sound source of the RRM is a random incidence in various directions, whereas that of the ITM is a normal incident. The SAC measured by the RRM is more extensive, practical, and costly than ITM. Usually, the SAC measured by RRM is used as the commercially available acoustical materials index. However, RRM requires large-area test samples for measurement and a special sound field of reverberation room for test experiments. Therefore, this study aims to use the ITM to measure SAC. The measured SAC, frequency, thickness, and material density were employed as independent variables and substituted in the obtained multiple regression model to predict SAC obtained by RRM. In addition, the measurement characteristics of impedance tubes provide varisized calibers for different frequency ranges to measure a relatively accurate SAC. Based on the abovementioned characteristics, this study proposed a dual-model for estimating the SAC of the reverberation room method to achieve the best-estimated result. After experimental validation, the dual-model estimated result was compared with SAC from the reverberation room method. It was observed that the maximum absolute value of all errors did not exceed 0.16. Most of the absolute errors were below 0.1, proving the accuracy of this method. Therefore, the method proposed in this study can shorten the acoustical material development schedule for manufacturers and save the cost of the development process.

Comparison of Static Wave Ratio and transfer Function Method in Determining the Sound Absorption Coefficient of Materials

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

Computer Simulation Model for Room Diffuse Sound Field

Comparison of Methods for Characterizing Sound Absorbing Materials

Sound absorption coefficient measurement for various building elements

Tuning of Estimated Sound Absorption Coefficient of Materials of Reverberation Room Method

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Sound Absorption Coefficient of Different Green Materials Polymer on Noise Reduction

Estimation of Sound absorption Coefficient from the Sound Power

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Calculation of statistical absorption coefficient using ensemble averaged surface normal impedance of material

Finite Element Method Analysis of Soundproof Functional Composite

Experimental Study of the Absorption Coefficient of Acoustic Insulators for Undergraduate University Students

Calculation of Resonant Sound Absorption Parameters for Performance Evaluation of Metal Rubber Material

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Measurement of the diffuse field sound absorption using a sound field synthesis method

Sound Absorption Characteristics of Unsaturated Porous Material Calculated by Modified Transfer Matrix Method

Determination of the characteristic impedance and the complex wave number by five different approaches

Theoretical estimation of sound absorption characteristics in a collection of rectangular holes: Comparison with experimental results

Acoustic properties of materials: a comparison of numerical and experimental methods.

Comparative Study of Noise Reduction Effects of Different Sound Absorption Barriers