Abstract:The main safety issue of lithium-ion batteries (LIBs) is thermal runaway (TR), which has greatly hindered the application of LIBs. Phase change materials (PCM) have been used in battery modules as a thermal management method due to the heat absorption function during the phase change process. However, the role of PCM in TR propagation mitigation has not been carefully examined. In this paper, a 1D heat transfer model was developed to predict the mitigation effect of PCM on TR propagation of a battery array, which shows the superiority of high simulation speed and accuracy. The effects of thermo-physical parameters of PCM on cascading cell-to-cell thermal runaway propagation behavior were investigated. In addition, we gave an optimal range of key parameters of PCM based on safe regulations of China and the United Nations regarding to the TR in electric vehicle LIBs. It was found that the latent heat, density and heat capacity of PCM have similar effects on TR propagation behavior. With the increase of the three PCM parameters, the time duration between cell-to-cell failure propagation increases linearly, which shows a slower TR propagation rate. The optimal ranges for density, heat capacity and latent heat of PCM are over 2150 kg·m −3 , over 4100 J·kg −1 ·K −1 and over 9 × 10 5 J·kg −1 , respectively. What's more, the TR propagation will exacerbate with the increase of thermal conductivity of PCM, which reminds us to notice a balance between thermal management and TR mitigation in PCM-based thermal management system. Generally, through analyzing the effect of thermal diffusivity of PCM in TR inhibition, we found higher thermal diffusivity will speed up the propagation of TR. And the TR propagation speed is more sensitive to the change of density of PCM. The thermal diffusivity of PCM should be less than 9 × 10 −7 m 2 ·s −1 to satisfy the safety standards. The PCM manifests great performance in retarding TR propagation with the phase transition temperature in the range from 318.15 to 518.15 K. Moreover, we found that there exists a critical PCM thickness over which TR propagation will not occur. As the battery thickness increases from 8.8 to 56.5 mm, the critical PCM thickness shows a non-monotonic variation trend (increasing at first and decreasing later). This study demonstrates the feasibility of using PCM as a thermal runaway mitigation strategy and provides a guideline for the optimization of physical parameters of PCM.

Experimental investigation of thermal failure propagation in typical lithium-ion battery modules

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Experimental Study on the Effect of State of Charge on Failure Propagation Characteristics Within Battery Modules

Experimentally exploring prevention of thermal runaway propagation of large-format prismatic lithium-ion battery module

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Experimentally exploring thermal runaway propagation and prevention in the prismatic lithium-ion battery with different connections

Investigation for the Effect of Side Plates on Thermal Runaway Propagation Characteristics in Battery Modules

Inhibition Effect of Different Interstitial Materials on Thermal Runaway Propagation in the Cylindrical Lithium-Ion Battery Module

Experimental Investigation of the Thermal Propagation, Emission Identification, and Venting-Flow Characteristics of a Li(Ni0.8Co0.1Mn0.1)O2 Battery Module

Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules

Investigating the Effect of Packing Format on LiNixCoyMnzO2 Lithium-Ion Battery Failure Behavior Based on Multidimensional Signals

Experimental Study on Thermal Runaway Propagation of Lithium-Ion Battery Modules with Different Parallel-Series Hybrid Connections

Investigating the Effect of Packing Format on LiNi X Co Y Mn Z O 2 Lithium-Ion Battery Failure Behavior Based on Multidimensional Signals

Experimental investigation on mitigation of thermal runaway propagation of lithium-ion battery module with flame retardant phase change materials

Experimental Investigation of the Thermal Runaway Propagation Characteristics and Thermal Failure Prediction Parameters of Six-Cell Lithium-Ion Battery Modules

The effect of PCM on mitigating thermal runaway propagation in lithium-ion battery modules

Experimental study on the thermal management performance of phase change material module for the large format prismatic lithium-ion battery

Dynamic thermophysical modeling of thermal runaway propagation and parametric sensitivity analysis for large format lithium-ion battery modules

A Study of Expansion Force Propagation Characteristics and Early Warning Feasibility for the Thermal Diffusion Process of Lithium-Ion Battery Modules

Experimental Analysis of Thermal Runaway Propagation Risk Within 18650 Lithium-Ion Battery Modules

Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes