Design of supersensitive and selective ZnO-nanofiber-based sensors for H2 gas sensing by electron-beam irradiation

Jae-Hun Kim,Ali Mirzaei,Hyoun Woo Kim,Ping Wu,Sang Sub Kim
DOI: https://doi.org/10.1016/j.snb.2019.04.113
2019-08-01
Abstract:<p>In the present study, ZnO nanofibers (NFs) were synthesized by the simple electrospinning technique for gas sensing studies. ZnO NFs were irradiated with a high-energy (1 MeV) electron beam (e-beam) at different doses (50, 100, and 150 kGy) to study the effect of the e-beam dose on the sensing performance of the synthesized ZnO NFs. H<sub>2</sub> sensing studies showed that the sensing properties of the unirradiated and 50-kGy-irradiated sensors were similar, which indicates that this e-beam dose was insufficient. However, the sensing characteristics improved with an increase in the irradiation dose to 100 and 150 kGy. The response of the optimal sensor (150-kGy-irradiated) to 10 ppm H<sub>2</sub> was much higher than that to other (interfering) gases (e.g., C<sub>2</sub>H<sub>5</sub>OH, C<sub>6</sub>H<sub>6</sub>, C<sub>7</sub>H<sub>8</sub>, and CO). The observed high gas response of the 150-kGy-irradiated sensor was attributed to its high surface area resulting from the one-dimensional nature of the ZnO NFs, the grain size of ZnO, and the formation of surface defects by e-beam irradiation. The high selectivity of the ZnO NFs toward H<sub>2</sub> gas was related mainly to the metallization of ZnO and the concentration gradient of carfbon across the NF surfaces. Overall, the findings demonstrate the effectiveness of high-energy irradiation in enhancing the sensing performance of ZnO NFs. We believe that this approach can be extended to other metal oxides for the enhancement of sensing performance.</p><h5>Graphical abstract</h5>
What problem does this paper attempt to address?