Grayscale digital light processing 3D printing for highly functionally graded materials

Xiao Kuang,Jiangtao Wu,Kaijuan Chen,Zeang Zhao,Zhen Ding,Fengjingyang Hu,Daining Fang,H. Jerry Qi

DOI: https://doi.org/10.1126/sciadv.aav5790

IF: 13.6

2019-05-03

Science Advances

Abstract:We present a single-vat grayscale digital light processing 3D printing method for highly functionally graded materials.

multidisciplinary sciences

What problem does this paper attempt to address?

From Grayscale Photopolymerization 3D Printing to Functionally Graded Materials

Guanghai Fei,Cesar Parra‐Cabrera,Kuo Zhong,Koen Clays,Rob Ameloot

DOI: https://doi.org/10.1002/adfm.202314635

IF: 19

2024-05-01

Advanced Functional Materials

Abstract:Based on various grayscale techniques, photopolymerization 3D printing provides nearly unlimited freedom in the design and fabrication of functionally graded materials with intricate structures and adjustable properties. This work comprehensively describes the use of grayscale photopolymerization 3D printing for producing functionally graded materials. In addition, it outlines the diverse applications of grayscale vat‐polymerization 3D printing. Functionally graded materials (FGMs) have spatial variations in structure or composition that result in gradients in their mechanical, thermal, swelling, or other properties. FGMs have garnered significant research interest because of their extensive applications in areas such as biomedical implants, sensors, and soft robotics. Recently, grayscale photopolymerization 3D printing has emerged as a promising technology for crafting complex and high‐resolution FGMs. This comprehensive work delves into various grayscale photopolymerization 3D printing techniques, offering insights into their ability to precisely control printing exposure energy and polymerization degree, which in turn influence material properties. Furthermore, this work highlights diverse applications of grayscale vat‐photopolymerization 3D printing. Finally, it offers perspectives on ways to enhance grayscale photopolymerization 3D printing, with a focus on improving printing feedstocks and grayscale strategies.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Grayscale Color 3D/4D Printing Via Orthogonal Photochemistry

Yahui Lu,Chenkai Zhang,Tao Xie,Jingjun Wu

DOI: https://doi.org/10.1021/cbe.3c00088

2024-01-01

Abstract:Coloration is essential for enhancing visual aesthetics and facilitating information communication, but it is difficult to apply to highly complex surfaces. Efficient manufacturing of 3D printed colored products is particularly challenging, given the arbitrary nature of the surfaces. We accomplish this goal with 3D/4D color printing using a photoprintable resin containing a free radical initiator, photocurable monomers, a photoacid generator, and an acid-sensitive dye. The free radical initiator is activated with a long wavelength light (405 nm) for 3D/4D photoprinting. Independently, the photoacid generator is triggered with a shorter wavelength light (365 nm) to activate acid-sensitive dye for coloration. This allows decoupling 3D/4D printing with coloration to yield geometrically complex 3D objects with designable surface color patterns as a highly efficient yet simple way to produce colored 3D objects.
3D gradient printing based on digital light processing

Han Wang,Yu Xia,Zixuan Zhang,Zhuoying Xie

DOI: https://doi.org/10.1039/d3tb00763d

2023-09-27

Abstract:3D gradient printing is a type of fabrication technique that builds three-dimensional objects with gradually changing properties. Gradient digital light processing based 3D printing has garnered considerable attention in recent years. This function-oriented technology precisely manipulates the performance of different positions of materials and prints them as a monolithic structure to realize specific functions. This review presents a conceptual understanding of gradient properties, covering an overview of current techniques and materials that can produce gradient structures, as well as their limitations and challenges. The principle of digital light processing (DLP) technology and feasible strategies for 3D gradient printing to overcome any barriers are also presented. Additionally, this review discusses the promising future of 4D bioprinting systems based on DLP printing.
Projection-Based Continuous 3D Printing Process with the Grayscale Display Method

Yancheng Wang,Dai Xue,Deqing Mei

DOI: https://doi.org/10.1115/1.4045616

2020-01-01

Abstract:The printing resolution and scale of projection-based 3D printing are affected by the pixel size and projected light power. An effective and versatile method to print complex constructs with high resolution and large area is still required since light distribution in printing systems is generally non-uniform. Here, we propose a projection-based continuous 3D printing with the grayscale display method to serve as an effective and precise way to improve printing resolution and area. The light characterization results demonstrated that the power density presented a non-uniform distribution, and the power values are linear to the excitation power. After modifying the masks into grayscale according to the duty cycle of the digital micro-mirror device (DMD) display, projected light exhibited improved uniformity along with expected light power and uniform ratio. To validate this developed printing process, the grayscale continuous printing of mesh and hexahedron frame constructs enabled a remarkable increase in the printing area and alleviation of under/over curing. This work reveals significant progress in printing of constructs at larger area and higher resolution in projection-based continuous 3D printing under non-uniform light.
Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing

S. Macrae Montgomery,Frédéric Demoly,Kun Zhou,H. Jerry Qi

DOI: https://doi.org/10.1002/adfm.202213252

IF: 19

2023-02-13

Advanced Functional Materials

Abstract:Digital light processing is a widely used additive manufacturing technique due to its high accuracy and print speed. However, a variety of factors including pixel size limit the maximum accuracy of the technique. Here, a methodology is presented to enhance accuracy beyond what is typically capable for a given projector resolution by using pixel‐level grayscale control to create round features from sharp pixels. Digital light processing (DLP) is a widely used additive manufacturing technique for functional applications due to its high accuracy and print speeds. However, a variety of factors such as pixel size, motion stage resolution, optical focus, and chemical properties of the resin limit DLP's minimum resolution. Recently, research into locally varying light intensities has led to the emergence of grayscale DLP printing, which offers new capabilities including sub‐pixel manipulation of the printed shape. Here, a methodology is developed to enhance accuracy beyond what is typically capable for a given projector resolution by using pixel‐level grayscale control to create round features from sharp pixels. A numerical representation of the DLP pixel shape is developed to account for the effects of the incident light patterns. A reaction‐diffusion model is then used to predict the printed shapes before and after grayscale enhancement. This model is used to determine the optimal pixel intensities to match a target shape. Finally, the minimum feature size allowed by the proposed method is explored. The promising results represent an important step forward in raising DLP printing to higher accuracy, which will allow the fabrication of functional and structural components with smaller features or smoother faces.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

Hari Kalathil Balakrishnan,Ludovic F. Dumée,Andrea Merenda,Cyril Aubry,Dan Yuan,Egan H. Doeven,Rosanne M. Guijt

DOI: https://doi.org/10.1002/sstr.202200314

IF: 15.9

2023-01-19

Small Structures

Abstract:The use of a grayscale mask is introduced in digital light projection 3D printing of a polymerization‐induced phase separation ink, allowing for the printing of materials with tunable porous properties. Under optimized conditions, a membrane‐integrated fluidic device is printed using an automated single‐step process from a single ink and used for the determination of iron from soil. 3D printing provides access to complex multilevel architectures, though the capability to routinely print and integrate structures of controlled porosity is limited. Herein, grayscale digital light projection 3D printing of a polymerization‐induced phase separation ink is introduced to directly 3D print functionally graded porous within a single layer from the same ink formulation. The structural properties of materials printed from a single ink are tuned from an effectively dense to a porous material with interconnected pores up to 250 nm. Heterostructures with the physically dense structure of porosity 0.8% and porous structures with up to 23% can be concurrently formed within a layer, with high spatial resolution inherent of this 3D printing technique. Materials with densities from 1.01 to 1.21 g cm−3 are 3D printed in a wicking device and show wicking rates (H2O) from complete diffusion blockage up to 4.5 mm h−1. Furthermore, a proof‐of‐concept membrane‐integrated fluidic device is used for the elemental metal sensing of iron in soil. The presented single‐step fabrication of functionally graded materials with pixel‐based control within a single layer holds potential for manufacturing and integrating membranes or sorbents for environmental, biotechnology, and healthcare applications.
Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Farzad Gholami,Liang Yue,Mingzhe Li,Ayush Jain,Akhlak Mahmood,Marcus Fratarcangeli,Rampi Ramprasad,H. Jerry Qi

DOI: https://doi.org/10.1002/adma.202408774

IF: 29.4

2024-09-29

Advanced Materials

Abstract:This study demonstrates the use of grayscale DLP 3D printing to fabricate polymeric composites with tailored conductivity. By manipulating light intensity and incorporating lithium ions, the process enables the creation of materials with conductivity differences exceeding three orders of magnitude, paving the way for low‐cost, rapid production of intricate electronic circuits and sensors. Fabricating polymeric composites with desirable characteristics for electronic applications is a complex and costly process. Digital light processing (DLP) 3D printing emerges as a promising technique for manufacturing intricate structures. In this study, polymeric samples are fabricated with a conductivity difference exceeding three orders of magnitude in various portions of a part by employing grayscale DLP (g‐DLP) single‐vat single‐cure 3D printing deliberate resin design. This is realized through the manipulation of light intensity during the curing process. Specifically, the rational resin design with added lithium ions results in the polymer cured under the maximum UV‐light intensity exhibiting higher electrical resistance. Conversely, sections that are only partially cured retains uncured monomers, serving as a medium that facilitates ion mobility, consequently leading to higher conductivity. The versatility of g‐DLP allows precise control of light intensity in different regions during the printing process. This characteristic opens up possibilities for applications, notably the low‐cost, facile, and rapid production of complex electrical circuits and sensors. The utilization of this technique makes it feasible to fabricate materials with tailored conductivity and functionality, providing an innovative pathway to advance the accelerated and facile creation of sophisticated electronic devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Preparation and Properties of Functional Materials Based on Digital Light Processing 3D Printing

Weiping Deng,Deqiao Xie,Fuxi Liu,Lida Shen,Zongjun Tian,Yang Yang

DOI: https://doi.org/10.1155/2022/4136072

IF: 3.791

2022-08-18

Journal of Nanomaterials

Abstract:3D printing, known as the "new industrial revolution," has set off an upsurge in the scientific and technological field in recent years, and 3D printing of digital light processing technology has even improved the performance and efficiency of 3D printing. This technology uses the projection principle to form; no matter the size of the workpiece, the forming speed is not affected. It uses very cheap lamp radiation, the system has no injection-molded components, there is no nozzle clogging problem of traditional molding systems, and maintenance costs are greatly reduced. In this paper, based on digital light processing 3D printing technology, light-curing reactive functional materials commonly used in digital light processing 3D printing are prepared. In the past, most of these materials were imported. In this paper, by adjusting the DLP technology, a water-soluble photocurable reflection material is constructed, a method for shaping the reaction material. It conducts experiments on the preparation and performance research of water-soluble photocurable reaction materials through formulation and process optimization. It prepared a water-soluble photocurable reactive functional material and compared it with traditional imported materials. Due to the characteristics of UV curing and good mechanical properties and water solubility, it provides a new idea for the preparation of 3D printing-related functional materials.

materials science, multidisciplinary,nanoscience & nanotechnology
Design and Modification of a Material Extrusion 3D Printer to Manufacture Functional Gradient PEEK Components

Tobias Ritter,Eric McNiffe,Tom Higgins,Omid Sam-Daliri,Tomas Flanagan,Michael Walls,Pouyan Ghabezi,William Finnegan,Sinéad Mitchell,Noel M. Harrison

DOI: https://doi.org/10.3390/polym15183825

IF: 5

2023-09-20

Polymers

Abstract:In recent years, the creative use of polymers has been expanded as the range of achievable material properties and options for manufacturing and post-processing continually grows. The main goal of this research was to design and develop a fully-functioning material extrusion additive manufacturing device with the capability to produce functionally graded high-temperature thermoplastic PEEK (polyether ether ketone) materials through the manipulation of microstructure during manufacturing. Five different strategies to control the chamber temperature and crystallinity were investigated, and concepts of thermal control were introduced to govern the crystallisation and cooling mechanics during the extrusion process. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy to observe and quantify the porosity levels and interlayer bonding strength, which affect the quality of the final part. Functional testing of the printed parts was carried out to identify crystallinity, boundary layer adhesion, and mechanical behaviour. Furnace cooling and annealing were found to be the most effective methods, resulting in the highest crystallinity of the part. Finally, a functionally graded material cylindrical part was printed successfully, incorporating both low and high crystalline regions.

polymer science
Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Weiwei Guo,Zhaoliang Jiang,Cheng Zhang,Li Zhao,Zongxiang Jiang,Xinde Li,Guopeng Chen

DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.09.037

IF: 5.7

2021-12-01

Journal of the European Ceramic Society

Abstract:Functionally graded materials (FGMs) play an essential role in tissue engineering because of their satisfactory histocompatibility and excellent mechanical performance. While traditional manufacturing methods allow production of simple FGMs, precise control of composition and customized property at transition between the dissimilar materials is still a challenge. Here, an extrusion-based functionally graded additive manufacturing (FGAM) platform was developed to generate smooth graded parts by thrusting out monolithic cylindrical filaments with high viscosity. Furthermore, the rheological properties, hydrodynamic behavior, and mixed homogeneity of the non-Newtonian fluids were studied. Therefore, the appropriate solid contents, alternative energy-efficient mixers, and optimized printing parameters were proved to be beneficial for an outstanding deposition effect of the suspension. Ultimately, an object with smooth gradient was successfully manufactured. The validity of this strategy was verified via optical microscopy combined with an image processing method to gauge homogeneity and a scanning electron microscope to investigate graded composition and microstructure.

materials science, ceramics
Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer

Eric McNiffe,Tobias Ritter,Tom Higgins,Omid Sam-Daliri,Tomas Flanagan,Michael Walls,Pouyan Ghabezi,William Finnegan,Sinéad Mitchell,Noel M. Harrison

DOI: https://doi.org/10.3390/polym15142992

IF: 5

2023-07-11

Polymers

Abstract:Functionally Graded Materials represent the next generation of engineering design for metal and plastic components. In this research, a specifically modified and optimised 3D printer was used to manufacture functionally graded polyether ether ketone components. This paper details the design and manufacturing methodologies used in the development of a polyether ether ketone printer capable of producing functionally graded materials through the manipulation of microstructure. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy, to observe and quantify the porosity levels and interlayer bonding strength, which affects the quality of the final parts. Specimens were produced under varying process conditions and tested to characterise the influence of the process conditions on the resulting material properties. The specimens printed at high enclosure temperatures exhibited greater strength than parts printed without the active addition of heat, due to improved bond formation between individual layers of the print and a large degree of crystallinity through maintenance at these elevated temperatures.

polymer science
Three-dimensional printing of functionally graded liquid crystal elastomer

Zijun Wang,Zhijian Wang,Yue Zheng,Qiguang He,Yang Wang,Shengqiang Cai

DOI: https://doi.org/10.1126/sciadv.abc0034

IF: 13.6

2020-09-25

Science Advances

Abstract:A 3D printing strategy to fabricate functionally graded liquid crystal elastomer is developed.

multidisciplinary sciences
Field-driven design and performance evaluation of dual functionally graded triply periodic minimal surface structures for additive manufacturing

Senlin Wang,Lichao Zhang,Mingkai Tang,Chao Cai,Jinxin Wu,Zihua Zhang,Yusheng Shi

DOI: https://doi.org/10.1016/j.matdes.2023.112257

2023-08-20

Abstract:Triply periodic minimal surface (TPMS) structures prepared by additive manufacturing (AM) have been widely used in aerospace and thermal management systems due to their functional advantages such as high specific strength and excellent heat transfer coefficient. However, lattices with uniform or simple gradients cannot match the regional diversity needs of functional advantages in service. This study proposed a field-driven AM data processing framework for dual functionally graded TPMS lattices. For unified data processing, mathematical functions, simulated outcomes, and geometric models were transformed into fields. I-WP and Diamond units were selected as the primitive and filling structures of Ti-6Al-4V lattices, respectively. According to the functional requirements, the gradient distribution design guided by the simulated stress field is completed through the proposed framework. The results illustrate that the field-driven dual graded lattices present superior compressive mechanical response. At almost equal volume fractions, their compressive strength is approximately 100% more than that of primitive lattices and 69% greater than that of dual uniform lattices. Furthermore, the dual lattices have larger specific surface areas than the primitive lattices, making them better at heat insulation and heat dissipation. This field-driven digital framework will show enormous potential in the matching design of functionally graded lattices.

materials science, multidisciplinary
Digital Light Processing Based Bioprinting with Composable Gradients

Mian Wang,Wanlu Li,Luis S. Mille,Terry Ching,Zeyu Luo,Guosheng Tang,Carlos Ezio Garciamendez,Ami Lesha,Michinao Hashimoto,Yu Shrike Zhang

DOI: https://doi.org/10.1002/adma.202107038

IF: 29.4

2021-10-23

Advanced Materials

Abstract:Recapitulation of complex tissues signifies a remarkable challenge and, to date, only few approaches have emerged that can efficiently reconstruct necessary gradients in three-dimensional (3D) constructs. This is true even though mimicry of these gradients is of great importance to establish the functionality of engineered tissues and devices. Here, a composable-gradient digital light processing (DLP)-based (bio)printing system is developed for the first time, utilizing the unprecedented integration of a microfluidic mixer for the generation of either continual or discrete gradients of desired (bio)inks in real time. Notably, the precisely controlled gradients are composable on-the-fly by facilely adjusting the (bio)ink flow ratios. In addition, this setup is designed in such a way that no washing steps are needed when exchanging the gradient (bio)inks, further enhancing our time- and (bio)ink-saving strategy. Various planar and 3D structures exhibiting continual gradients of materials, of cell densities, of growth factor concentrations, of hydrogel stiffness, and of porosities in horizontal and/or vertical direction, are exemplified. The composable fabrication of multifunctional gradients strongly support the potential of our unique bioprinting system in numerous biomedical applications.This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Optimize projected mask images for improving three-dimensional printing accuracy for digital light processing based vat photopolymerization

Yifan Wang,Yanan Zhang,Haiyi Liang,Xingyue Sun

DOI: https://doi.org/10.1016/j.addma.2024.104257

IF: 11

2024-06-20

Additive Manufacturing

Abstract:Additive manufacturing technology, specifically digital light processing (DLP) based vat photopolymerization (VPP), is extensively employed for fabricating complex constructs. Nevertheless, the accuracy of DLP-VPP is hindered by challenges such as light diffraction during propagation and light penetration along the exposure axis within the photopolymeric resin. To mitigate these issues, regulating the grayscale of projected mask images offers a reliable approach to reduce undesired curing. In this study, we introduce a voxel-based multi-layer solidification model to predict the exposure dose distribution of printed parts. Based on this model, we propose a pixel-level grayscale optimization method using the gradient descent technique. This method allows us to control the accumulated exposure dose of each voxel by modifying the grayscale of individual pixels in the projected mask images, thereby improving the accuracy of the printed parts. To validate our optimization method, we conducted a series of experiments involving the printing of four representative structures using both the traditional method and our proposed optimization method. The results demonstrate that the structures produced using our optimization method exhibit superior consistency with the target geometry. This indicates a significant improvement in accuracy achieved through our optimization technique. Furthermore, our optimization method has successfully enabled the fabrication of microchannels that are previously unattainable using traditional method. This achievement highlights the immense potential of our optimization method in the realm of printing microchannels.

engineering, manufacturing,materials science, multidisciplinary
Creating functionally graded concrete materials with varying 3D printing parameters

Yi Wei Daniel Tay,Jian Hui Lim,Mingyang Li,Ming Jen Tan

DOI: https://doi.org/10.1080/17452759.2022.2048521

IF: 10.6

2022-03-14

Virtual and Physical Prototyping

Abstract:The varying physical property in a functionally graded material can be tailored to its specific requirements while using material resources effectively. 3D concrete printing can produce robust and lightweight functionally graded material for the construction industry. In this study, an approach was developed to create an objective tailored functionally graded concrete material by examining the filament material property correlations with the printing parameters. It was found that the physical property of the printed material is closely correlated to the flow rate and travel speed of the printer. Results obtained from the experiment show that the optimised structure achieved an approximately 50% improvement in the strength-to-weight ratio. This preliminary examination of the 2D optimised concrete structure opens the realm of possibility for future work in 3D optimised functionally graded concrete.

engineering, manufacturing,materials science, multidisciplinary
Functionally graded materials with grain-size gradients and heterogeneous microstructures achieved by additive manufacturing

Zhangping Hu,Zongqing Ma,Liming Yu,Yongchang Liu

DOI: https://doi.org/10.1016/j.scriptamat.2022.115197

IF: 6.302

2022-12-01

Scripta Materialia

Abstract:In this work, 316L/CuCrZr functionally graded materials were prepared by laser powder bed fusion. Not only the strong bonding of 316L and CuCrZr was achieved, but more importantly, the grain-size gradients and heterogeneous microstructures were introduced into the samples. The gradient microstructure was characterized by ultrafine equiaxed grains sandwiched between micron-scale columnar grains. The dual-scale heterogeneous microstructure was composed of the BCC α-Fe and FCC ε-Cu phases. This grain size gradient and heterogeneous microstructure ensure that the samples possess high shear and tensile strength. The formation mechanisms of the grain-size gradients and heterogeneous microstructures of the samples were further discussed. The proposed strategy that functionally graded materials with grain size gradients and heterostructures can be fabricated by additive manufacturing may open up a new avenue for materials design.

materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering
Scalable Printing of Bionic Multiscale Channel Networks Through Digital Light Processing-Based Three-Dimensional Printing Process.

Yue Wang,Yancheng Wang,Deqing Mei

DOI: https://doi.org/10.1089/3dp.2020.0025

IF: 5.355

2020-01-01

3D Printing and Additive Manufacturing

Abstract:Digital light processing (DLP)-based printing process has been used to print microfeature-sized constructs and architectures for biomedical applications; the key challenge is to achieve both large printing size and high accuracy at the same time. Here we reported a scalable DLP-based three-dimensional (3D) printing system with scalable resolution and building size, which was used for printing of multiscale hydrogel fractal bionic channels. Scalable printing was achieved by moving the convex lens of the printing system, and thus, each single micromirror of the digital micromirror device chip corresponded to the single-pixel size scaling from 6 to12 μm. Using this system, we were able to use poly (ethylene glycol) diacrylate to fabricate a variety of multiscale architectures, such as regular fractal Y-shaped channels, and more irregular and intricate geometries, such as biomimetic capillary vascular networks. Blue and red food dye solutions were able to freely fill all these channels in the scaffolds, from the trunk (>1500 μm in width) to small branch (∼30 μm in width) by capillarity. Cell experiments were carried out to certify the biocompatibility of printed multiscale biomimetic channel networks. This work reveals significant progress in printing multiscale constructs with both large printing size and high precision in scalable DLP-based 3D printing.
Simultaneous Color‐ and Dose‐Controlled Thiol–Ene Resins for Multimodulus 3D Printing with Programmable Interfacial Gradients

Meghan T. Kiker,Elizabeth A. Recker,Ain Uddin,Zachariah A. Page

DOI: https://doi.org/10.1002/adma.202409811

IF: 29.4

2024-08-31

Advanced Materials

Abstract:Exposing a novel multifunctional resin to different colors and intensities of light enables 3D printing of high‐resolution objects with programmable stiffness gradients that are mimetic of structures found in nature. Drawing inspiration from nature's own intricate designs, synthetic multimaterial structures have the potential to offer properties and functionality that exceed those of the individual components. However, several contemporary hurdles, from a lack of efficient chemistries to processing constraints, preclude the rapid and precise manufacturing of such materials. Herein, the development of a photocurable resin comprising color‐selective initiators is reported, triggering disparate polymerization mechanisms between acrylate and thiol functionality. Exposure of the resin to UV light (365 nm) leads to the formation of a rigid, highly crosslinked network via a radical chain‐growth mechanism, while violet light (405 nm) forms a soft, lightly crosslinked network via an anionic step‐growth mechanism. The efficient photocurable resin is employed in multicolor digital light processing 3D printing to provide structures with moduli spanning over two orders of magnitude. Furthermore, local intensity (i.e., grayscale) control enables the formation of programmable stiffness gradients with ≈150× change in modulus occurring across sharp (≈200 μm) and shallow (≈9 mm) interfaces, mimetic of the human knee entheses and squid beaks, respectively. This study provides composition–processing–property relationships to inform advanced manufacturing of next‐generation multimaterial objects having a myriad of applications from healthcare to education.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Digital light processing based multimaterial 3D printing: challenges, solutions and perspectives

Jianxiang Cheng,Shouyi Yu,Rong Wang,Qi Ge

DOI: https://doi.org/10.1088/2631-7990/ad4a2c

2024-05-12

International Journal of Extreme Manufacturing

Abstract:Multimaterial (MM) 3D printing shows great potential for application in metamaterials, flexible electronics, biomedical devices and robots, since it can seamlessly integrate distinctive materials into one printed structure. Among numerous MM 3D printing technologies, digital light processing (DLP) MM 3D printing is compatible with a wide range of materials from hydrogels to ceramics, and can print MM 3D structures with high resolution, high complexity and fast speed. This paper introduces the fundamental mechanisms of DLP 3D printing, and reviews the recent advances of DLP MM 3D printing technologies with emphasis on material switching methods and material contamination issues. It also summarizes a number of typical examples of DLP MM 3D printing systems developed in the past decade, and introduces their system structures, working principles, material switching methods, residual resin removal methods, printing steps, as well as the representative structures and applications. Finally, we provide perspectives on the directions of the further development of DLP MM 3D printing technology.

engineering, manufacturing,materials science, multidisciplinary

Grayscale digital light processing 3D printing for highly functionally graded materials

From Grayscale Photopolymerization 3D Printing to Functionally Graded Materials

Grayscale Color 3D/4D Printing Via Orthogonal Photochemistry

3D gradient printing based on digital light processing

Projection-Based Continuous 3D Printing Process with the Grayscale Display Method

Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Preparation and Properties of Functional Materials Based on Digital Light Processing 3D Printing

Design and Modification of a Material Extrusion 3D Printer to Manufacture Functional Gradient PEEK Components

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer

Three-dimensional printing of functionally graded liquid crystal elastomer

Field-driven design and performance evaluation of dual functionally graded triply periodic minimal surface structures for additive manufacturing

Digital Light Processing Based Bioprinting with Composable Gradients

Optimize projected mask images for improving three-dimensional printing accuracy for digital light processing based vat photopolymerization

Creating functionally graded concrete materials with varying 3D printing parameters

Functionally graded materials with grain-size gradients and heterogeneous microstructures achieved by additive manufacturing

Scalable Printing of Bionic Multiscale Channel Networks Through Digital Light Processing-Based Three-Dimensional Printing Process.

Simultaneous Color‐ and Dose‐Controlled Thiol–Ene Resins for Multimodulus 3D Printing with Programmable Interfacial Gradients

Digital light processing based multimaterial 3D printing: challenges, solutions and perspectives