Abstract:The elimination of the need for an Ohmic heating solenoid may be the most impactful design driver for the realization of economical compact fusion tokamak reactor systems. However, this would require fully non-inductive start-up and current ramp-up from zero plasma current and low electron temperature of sub-keV to the full plasma current of ~ 10 - 15 MA at 20 - 30 keV electron temperature. To address this challenge, an efficient solenoid-free start-up and ramp-up scenario utilizing a low-field-side-launched extraordinary mode at the fundamental electron cyclotron harmonic frequency (X-I) is proposed, which has more than two orders of magnitude higher electron cyclotron current drive (ECCD) efficiency than the conventional ECCD for the sub-keV start-up regime. A time dependent model was developed to simulate the start-up scenarios. For the Spherical Tokamak Advanced Reactor (STAR) [1], it was found that to fully non-inductively ramp-up to 15 MA, it would take about 25 MW of EC power at 170 GHz. Because of the relatively large plasma volume of STAR, radiation losses must be considered. It is important to make sure that high Z impurities are kept sufficiently low during the early current start-up phase where the temperature is sub-keV range. Since the initial current ramp up takes place at a factor of ten lower density compared to the sustained regimes, it is important to transition into a higher bootstrap fraction discharge at lower density to minimize the ECCD power requirement during the densification. For the sustainment phase an array of eight gyrotron launchers with a total of about 60 MW of fundamental O-mode was found to be sufficient to provide the required axis-peaked external current drive. High efficiencies between 19 – 57 kA/MW were found with optimal aiming, and these were resilient to small changes in aiming angles and density and temperature profiles.

High-power gyrotrons for electron cyclotron heating and current drive

Recent Experiment Results During Electron Cyclotron Heating On Hl-2a

The targeted heating and current drive applications for the ITER electron cyclotron system

Multi-harmonic electron cyclotron heating and current drive scenarios for non-inductive start-up and ramp-up in high field ST-40 spherical tokamak

ECRH and ECCD with high power gyrotrons at the stellarators W7-AS and W7-X

Multiphysics Modeling of Insert Cooling System for a 170-GHz, 2-MW Long-Pulse Coaxial-Cavity Gyrotron

Development and Preliminary Commissioning Results of a Long Pulse 140 GHz ECRH System on EAST Tokamak (Invited)

High power millimeter wave experiment of ITER relevant electron cyclotron heating and current drive system

Design and Preliminary Test of a 105/140 GHz Dual-Frequency MW-level Gyrotron

Efficient ECCD non-inductive plasma current start-up, ramp-up, and sustainment for an ST fusion reactor

Automation of gyrotron electron beam current for fusion devices

High-Power Ka-Band Gyrotron Rectifier for Advanced Systems of Wireless Power Transmission

A review on the sub-THz/THz gyrotrons

Optimization Simulations of Electron Cyclotron Wave Heating and Current Drive in Experimental Advanced Superconducting Tokamak

Plasma heating and improvement of lower hybrid current drive efficiency by electron cyclotron waves on EAST

Forward-wave Enhanced Radiation in the Terahertz Electron Cyclotron Maser

Broadband Terahertz-Power Extracting by Using Electron Cyclotron Maser

Design and Experiment on a 95-GHz 400 kW-Level Gyrotron

Concept of Dual-Frequency Double-Beam Gyrotron for Plasma Applications

Diamond Window Technology for Electron Cyclotron Heating and Current Drive: State of the Art

Design and Cold Test of a G-Band 10-kW-Level Pulse TE 01 -Mode Gyrotron Traveling-Wave Tube