Abstract:Transformer is one of the most important equipment in the power system, assuming the voltage conversion, distribution, transmission of electrical energy mandate in power network, which is an important prerequisite for safe and stable operation of power system. Once the transformer fault, it may lead to blackouts, and even the collapse of the power network, causing huge economic losses. From the point of view of economy and safety, it is necessary to carry out insulation diagnosis and life assessment for prolonging the service life of power transformer. Dielectric response measurements are a technology that is used to detect the insulation condition of transforms. In recent years, a series of non-destructive test methods based on the dielectric response theory of transformer have been developed, including frequency domain dielectric spectroscopy (FDS) in the frequency domain and the polarization and depolarization current (PDC), the return voltage method (RVM) in time domain. On the basis of dielectric response technology, this paper discusses the time domain dielectric spectroscopy of PDC and RVM, also including the conversion algorithm between the two methods. The RVM method has the advantage of adjusting the discharge resistance of the external circuit, which can calculate the equivalent parameters of dielectric, and the PDC takes into account the characteristics of the oil, the conductivity of the oil, the insulation structure and material properties and so on. The physical basis of the RVM and PDC methods is similar, but the use of the RVM method for testing is more complex than the PDC method. So it is necessary to study the conversion algorithm from PDC to RVM, which improve the flexibility of time domain dielectric spectrum test. The derivation and experimental verification of the algorithm are presented in this paper.

Field Diagnosis on Transformers for Wind Turbine Applications

Fault Diagnosis Technologies for Power Transformers During the On‐site Inductive Oscillating Switching Impulse Voltage Withstand Test

Online State Diagnosis of Transformer Windings Based on Time-Frequency Analysis

Electric Field Analysis and Insulation Structure Optimization of 66 kV/10 MVA Offshore Wind Power Dry-Type Transformer

Analysis and Optimization of Electric Field Distribution in 1200kv SF6 Insulated Power Frequency Test Transformer

Transient Overvoltage Response Performance of Transformer Windings with Short-Circuit Fault

On-line and on-site PD monitoring and diagnosis of power transformer

An On-line Insulation Diagnosis Method for Transformer Bushing Based on Frequency Domain Spectroscopy under Transient Voltage Excitation

Time-frequency Analysis Based State Diagnosis of Transformers' Windings under the Short-Circuit Shock

Causes of transformer failures and diagnostic methods – A review

On Site Oscillating Lightning Impulse Test and Insulation Diagnose for Power Transformers

Fault Identification of Winding Axial Displacement and Inter-turn Short Circuit for UHVDC Transformer

Winding Mechanical Fault Diagnosis Technique of Power Transformer Based on Time-Frequency Vibration Analysis

Lifetime Monitoring and Estimation Strategy for Large Power Transformer

Study on Return Voltage Measurement of Oil-paper Insulation Testing Technology in Transformers

Analysis of a 110kV Transformer Near-Area Short-Circuit Fault Resulting in Winding Deformation and Management Measures

A Novel Method for Online Diagnostic Analysis of Partial Discharge in Instrument Transformers and Surge Arresters from the Correlation of HFCT and IEC Methods

Application of Dielectric Response for Oil-Immersed Transformer

Transformer Health Monitoring Using Dissolved Gas Analysis

An intelligent monitoring and diagnosis system for 330kV oil-immersed power transformer

Applications and Prospects of Online Insulation Monitoring Technique Based on Broadband Frequency Response for Transformers in Voltage Source Converter System