Abstract:Structural Health Monitoring, Ahead of Print. To address the issues of high concealment and difficult positioning of loose bolts in transmission towers, this paper proposes a new method for locating loose bolts in transmission towers. In this method, we divide the vibration response of the transmission tower into low-frequency signals of 2–25 Hz and high-frequency signals of 25–75 Hz. For the low-frequency signals, the single signal component is obtained by adaptive Chirp mode decomposition and uses the general demodulation transformation to deeply denoise the non-modal information. Since frequency characteristics themselves do not contain time information, considering the importance of time information for positioning, we propose a low-frequency time-varying frequency feature that preserves time characteristics based on synchronous wavelet transform and peak search. For the high-frequency signals, we use singular value decomposition to remove signal outliers caused by pulse excitation and eliminate forced vibrations through wavelet packet transform. Without altering its inherent characteristics, this method enables high-frequency time-domain signals to better represent the nonlinear characteristics of transmission towers. Furthermore, based on the powerful capabilities of Timesnet and Transformer in dealing with time series data, we propose a fault diagnosis model, which ultimately achieves the positioning of loose bolts in transmission towers. The bolt node model proves that this approach can better represent the loose bolt characteristics, and the transmission tower model verifies the effectiveness of this approach in locating loose bolts in transmission towers. Finally, bolt-loosening tests were conducted on a 110 kV transmission tower, and the accuracy of the positioning results reached 92.8%, demonstrating the effectiveness and efficiency of this method in practical positioning applications.

Multistage damage detection of a transmission tower: Numerical investigation and experimental validation

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage Determination of Pipelines Based on Variation of Vibrating Frequencies

Research on loose bolt localization technology for transmission towers

Computer Vision-Based Damage Identification and Structural Analysis of a Practical Transmission Tower

Damage detection of flange bolts in wind turbine towers using dynamic strain responses

Transmission tower bolt-loosening time–frequency analysis and localization method considering time-varying characteristics

Detecting localized damage in cantilevered structures under nonstationary ambient excitations via Gabor spectral mode transmissibility functions

HHT-based Structural Damage Identification for Transmission Tower

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Nonlinear damage identification method of transmission tower structure based on general expression for linear and nonlinear autoregressive model and Itakura distance

Looseness Identification of Transmission Tower Based on Inertial Measurement

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

Structural Damage Identification Based on Transmissibility in Time Domain

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Vibration feature extraction and fault detection method for transmission towers

Structural Damage Detection Using Changes in Natural Frequencies: Theory and Applications

Experimental validation of automated OMA and mode tracking for structural health monitoring of transmission towers

Two-stage damage detection to a benchmark structure using ambient data

Effect of bolt tightening force on the transmission tower modal parameters and a method for looseness identification

Seismic Response and Collapse Analysis of a Transmission Tower Structure: Assessing the Impact of the Damage Accumulation Effect