Abstract:Grouting is a common method for reducing water inflow in tunneling projects in hard rock. A good grouting design should be adapted to the water-bearing fracture system in the rock mass. The aim of this work is to present a case study using relevant parameters, to suggest a combination of tests to provide them, and to show how a conceptual model of the water-bearing fracture system can be chosen based on them. The case study, to which the proposed methodology has been applied, is a section of the TASS tunnel at 450m depth in crystalline rock in Äspö Hard Rock Laboratory in Sweden. In this tunnel project an extensive number of tests provided a fine opportunity for analysis and discussions.A set of functional parameters to describe the rock mass for grouting purposes has been suggested. These are: the hydraulic head h; the hydraulic apertures b of the fractures; fracture frequency P10; the number and orientation of the major fracture sets; and the flow dimension Dq. A set of investigation methods is suggested, aimed at providing the necessary information for high-precision tunnel projects with strict inflow requirements such as the tunnel project studied.Based on these parameters, it is suggested that a conceptual model of the water-bearing fracture system in the rock mass should be chosen. It is shown how this was done in the case study, first in the investigation stage and then an update in the construction stage. Possible ways to adapt the grouting design to the conceptual model are suggested. Selective grouting may be considered for a rock mass with a 2D fracture system, one dominating water-bearing fracture set, when the tunnel orientation is close to perpendicular to this set. For rock mass with a 3D fracture system, two or more water-bearing fracture sets, systematic grouting may be preferable to avoid “moving the water leakage” from one tunnel section to a neighboring section. When the tunnel intersects a fracture zone the focus should be on sealing this zone.

The significance of hydraulic jacking for grout consumption during high pressure pre-grouting in Norwegian tunnelling

Development of an algorithm to detect hydraulic jacking in high pressure rock mass grouting and introduction of the PF index

Drill Monitoring for Rock Mass Grouting: Case Study at the Stockholm Bypass

Modern Pre-Excavation Grouting for Underground Structures in Rock

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Pre‐excavation grouting in rock tunneling – Dealing with high groundwater pressures

Estimation of deformation and stiffness of fractures close to tunnels using data from single-hole hydraulic testing and grouting

A new parameter to assess hydromechanical effects in single-hole hydraulic testing and grouting

A Swedish Grouting Design Concept: Hydraulic Testing and Selection of Grout

Swedish grouting design: hydraulic testing and grout selection

A hard rock tunnel case study: Characterization of the water-bearing fracture system for tunnel grouting

State of the art in European grouting

Information and knowledge behind data from underground rock grouting

Application of the pressure grouting in the hydraulic tunnels

An investigation of the effects of important grouting and rock parameters on the grouting process

Understanding the Effect of Cementitious Grouting Pressure on Micro-Fracture Permeability for Rock Reinforcement Underground: A Lab Study

Steering Parameters for Rock Grouting

Real-time characterization of the grouting diffusion process in fractured sandstone based on the low-field nuclear magnetic resonance technique

Study on the Influence of Back-fill Grouting Parameters in Unsaturated Strata on the Seismic Performance of Shield Tunnels

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

A Novel Evaluation Model of Grouting Effect in Weak and Water-Rich Stratum