Abstract:Abstract Background In recent years, the technology of blocking and grouting of has been widely used in the treatment of groundwater inrush in tunnels in China’s mines. Studies have been carried out on the aggregates pouring under hydrodynamic conditions; however, there is lack of studies of the grout propagation in the pouring aggregate mass, which formed in the earlier stage. This paper presents an experimental investigation of grout propagation in poured aggregates with flowing water, which focused on the second stage, i.e., the grouting stage, after the first stage of aggregates pouring in the salvage of an inundated underground tunnel. Results In this work, a visualized tunnel replica with flowing water was adopted to investigate the main effects of sealing efficiency, water pressure variation, propagation mechanism during grouting in the poured aggregates with different grain sizes and flowing water conditions. A series of experiments with orthogonal array design were carried out, and the propagation of cement/sodium silicate and the change characteristics of fluid pressure in the tunnel were obtained. The results show that the main effects on the sealing efficiency of grouting in poured aggregates with flowing water in a descending order is cement/sodium silicate ratio, relative density of aggregates, particle size distribution of aggregates, and final water pressure difference of both ends of aggregates segment. The cementation form of grouted aggregates has four types; T shape, H shape, O shape and shell shape. The main mode of grout propagation includes three types; permeation filling mode, compaction- permeation mode, and compaction-fracturing mode, which reflects the influence of grain size, density of aggregates and grouting pressure. The variation of water pressure can be divided into four categories; overall ascending type, step ascending type, concave type, and convex type. The curve type mainly depends on water pressure, water flowrate, relative density and grain size of aggregates, gel time, propagation mechanism of grout. Conclusion The flow rate after grouting has decreased by approximately 60% to 86% compared to that before grouting, bulk hydraulic conductivity decreased by more than 80%, reflecting a great improvement of the sealing efficiency in the grouting stage after the pouring stage. The research on grout propagation in different graded aggregate mass has guiding significance for the design and construction of a rapid disaster treatment after groundwater inrush.

Information and knowledge behind data from underground rock grouting

Research on Seepage of Jointed Rock Mass of Tunnel and Limited Discharge of Grouting

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

Rapid Reinforce Grouting System for Surrounding Rock Masses in Large Underground Water-sealed Storage Caverns

Analytical Solutions of Steady a Seepage Field for Deep-Buried Tunnel with Grouting Ring Considering Anisotropic Flow

A State-of-the-Art Review on the Study of the Diffusion Mechanism of Fissure Grouting

Grouting Treatment and Parameters Optimization in Watery Karst Areas of High Speed Railway Tunnel Based on Comprehensive Geological Forecast: A Case Study

Precise application of grouting technology in underground coal mining: water inrush risk of floor elimination

Study of grouting effectiveness based on shear strength evaluation with experimental and numerical approaches

Experimental Study on Grouting and Flow Characteristics of Rough Vertical Fractures

Understanding the Effect of Cementitious Grouting Pressure on Micro-Fracture Permeability for Rock Reinforcement Underground: A Lab Study

Experiment and Numerical Simulation on Grouting Reinforcement Parameters of Ultra-Shallow Buried Double-Arch Tunnel

An Experimental Study on Fracturing Response and Slurry Flow of High-Pressure Grouting in Fractured Rock

Study on Sensitivity Parameters Analysis of Grouting Reinforcement Underpassing Existing Subway Tunnel by Numerical Modeling

Grouting Mechanism in Water-Bearing Fractured Rock Based on Two-Phase Flow

Grouting techniques for the unfavorable geological conditions of Xiang'an subsea tunnel in China

Groundwater Inrush Control and Parameters Optimization of Curtain Grouting Reinforcement for the Jingzhai Tunnel

Groundwater runoff pattern and keyhole grouting method in deep mines

Research status and future trends on surface pre-grouting technology in reforming wall rock of vertical shafts in coal mines in China

Experimental investigation on grout propagation in poured aggregates for controlling water inrush in tunnels with flowing water

Theoretical analysis on horizontal rectification of tunnel near deep foundation pit by grouting