Abstract:A non‐iterative contact geometry algorithm with the consideration of wheel‐rail elastic contact is proposed. The algorithm independently calculates the left and right wheel‐rail gaps without iteration, which overcomes the limitation of simultaneous contact on both rails. Moreover, it converts rail elastic deformation and track irregularities into the lateral displacement of wheel, avoiding the real‐time calculation of the rail spatial coordinates. To ensure a more accurate simulation of the wheel‐rail contact state in vehicle‐track interaction, a non‐iterative contact geometry determination algorithm is proposed. This algorithm decouples lateral movement and roll, independently calculates the minimum wheel‐rail gap on both sides, and overcomes the limitation of simultaneous wheel‐rail contact on both sides. It can be applied to single‐side and two‐side wheel‐rail separation problems. Additionally, by converting track irregularity and rail deformation into the reverse displacement of the wheel, it avoids real‐time calculation of the wheel‐rail spatial position, thereby improving calculation efficiency. The effectiveness of the algorithm is verified through Universal Mechanism software and field measurements. Subsequently, the influence of the measured wheel‐rail profile, rail cant, and rail gauge on the wheel‐rail contact characteristics is analyzed. Finally, vehicle shaking caused by track irregularity and wheel‐rail contact is examined from the perspective of wheel‐rail matching. The study demonstrates that the non‐iterative algorithm is suitable for online simulation by pre‐processing the contact geometry parameters. When the track gauge and rail cant increase, the distribution of wheel‐rail contact points becomes more concentrated. Furthermore, when the excitation frequency of wheel‐rail matching is close to the track irregularity excitation frequency, it causes vibration amplification, resulting in lateral vehicle shaking.

A Fast Wheel-Rail Forces Calculation Computer Code

Fast Calculation Method for Mechanical Response at the Surface of Asphalt Pavement under an Elliptical Load

Assessing the fast non-Hertzian methods for wheel-rail rolling contact integrated in the vehicle dynamics simulation

Determination of Creep Force, Moment, and Work Distribution in Rolling Contact With Slip

A Fast Algorithm for the Simplified Theory of Rolling Contact

Kalker's algorithm Fastsim solves tangential contact problems with slip-dependent friction and friction anisotropy

A fast method for solving conformal rolling contact problems

A Non‐Iterative Wheel‐Rail Contact Geometry Determination Algorithm and Its Application

Generalisation of the linear theory of rolling contact to a single double-elliptic contact region and its application to solve non-Hertzian contact problems using extended FASTSIM

A new direct approach for evaluating the wheel-rail contact stiffness, including surface roughness and hardening effects

A mathematically-based study of the random wheel-rail contact irregularity by wheel out-of-roundness

Application of the extended FASTSIM for non-Hertzian contacts towards the prediction of wear and rolling contact fatigue of wheel/rail systems

Wear modelling in wheel–rail contact problems based on energy dissipation

Fatigue Life Prediction of a Railway Bogie under Dynamic Loads through Simulation

Development and advancement in the wheel-rail rolling contact mechanics

Wheel/rail adhesion and analysis by using full scale roller rig

Comparison between quasi-static and multibody dynamic simulations for wheel-rail contact analysis

Wheel Tread Wear Prediction of High-Speed Railway Train

A wheel–rail normal contact model using the combination of virtual penetration method and strip-like Boussinesq's integral

Calculation of Wear of Railway Wheels with Multibody Codes: Benchmarking of the Modelling Choices

Using the fatigue crack initiation parameter for prediction of the crack location on a curved track by 3D-FE analysis