Abstract:The assembled hollow-core slab bridge is the most widely used beam bridge in China. With the increasing traffic volume and traffic load in China, the joints of the hollow-core slab bridge are prone to damage. In this paper, a hollow-core slab bridge with locally curved prestressed tendons is proposed. Based on the static load test of a beam with joints taken from the cross section of a hollow-core slab bridge in practical engineering, a finite element nonlinear analysis is used to simulate the test, and the concrete and interface parameters under the correct analysis results are obtained. Finally, the parameters are applied to the three-beam and two-joint hollow-core slab bridge with a span of 10 m and a finite element analysis is carried out to explore the total failure process and performance improvement effect of the prestressed hollow-core slab bridge. The results show that the interface unit method can successfully simulate the new-to-old concrete interface where the joint is in contact with the precast beam segment. Compared with the static load test results, the analysis error of each finite element model is basically within 15%. Compared with the traditional hollow-core slab bridge, the cracking load, through-joint load, and ultimate load of the prestressed hollow-core slab bridge are increased by 50.0%, 91.7%, and 66.7%, respectively. Under the same load, the stress of the U-bar, the relative deflection of both sides of the joint, and the maximum width of the joint of the prestressed hollow-core slab bridge are lower than those of the traditional hollow-core slab bridge. When the ultimate load is reached, the longitudinal crack lengths of the traditional hollow-core slab bridge and the prestressed hollow-core slab bridge are 0.48 L and 0.4 L, respectively, and the damage degree of the prestressed hollow-core slab bridge is lower than that of the traditional hollow-core slab bridge.

Analysis of Influence of Hinge Condition on Overall Mechanical Performance of Hollow Slab Beam

Force Transfer Mechanism of the Hinge Joint of Multi-Adjacent Hollow Slab Precast Bridge

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Numerical Analysis on Hinge Joints Reinforcement Effect of Prefabricated Plate Girder

Research on assessment of hollow slab bridge hinge joint damage and reinforcement method based on steel strip-tie rod clamping

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Detection and Damage Evaluation of Hinge Joints in Hollow Slab Bridges Based on a Light-Load Field Test

Hinge Joints Performance Assessment of a PC Hollow Slab Bridge Based on Impact Vibration Testing

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Study on Load Transfer Mechanism of Local Curved Prestressed Hollow-Core Slab Bridge

Analysis of Hinge Joints Contact Surface Stresses for Fabricated Reinforced Concrete Simply-supported Plate Girder Bridges

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Theoretical and finite element analysis of engineered cementitious composite (ECC) link slab in hollow slab beam bridge base on different load conditions

Analysis of Mechanical Characteristics of Steel-Concrete Composite Flat Link Slab on Simply-Supported Beam Bridge

Analysis and assessment of articulated skew hollow slab beam bridge

Optimum Analysis of Vibration Reduction Performance for Floating Slab Track Based on Shear Hinge

Reliability Evaluation of Hinged Slab Bridge Considering Hinge Joints Damage and Member Failure Credibility

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

A hybrid method for damage detection and condition assessment of hinge joints in hollow slab bridges using physical models and vision-based measurements