Abstract:Abstract The arc-toothed cylindrical worm has an arc tooth profile in a section, which may be the axial section, the normal section, or an offsetting plane of the worm helical surface. The meshing principle for a gearing containing such a worm is established. The normal vector of instantaneous contact line is determined in the natural frame and the meshing performance parameters are obtained without the help of the curvature parameters of the worm helical surface to ensure the established meshing principle is concise and practical. The numerical results show that the worm working length can be beyond half of the thread length and the meshing zone of the worm pair can cover most of the worm gear tooth surface. The instantaneous contact lines are uniformly distributed and the worm pair forms double-line contact. The numerical outcomes of the induced principal curvature show that the contact stress level between the teeth is higher in the middle of the worm gear tooth surface and near its dedendum. The forming condition of the lubricating oil film is poorer in the middle of the worm gear tooth surface and from addendum to dedendum as demonstrated by the numerical results of the sliding angle. The normal arc-toothed worm lathed by an offsetting cutter is recommended to apply in industry after various researches and analyses. The cutting geometric condition of the worm is investigated quantitatively. It is discovered that the rule of the cutter working relief angle changes along the cutting edge during lathing the worm.

Influence of grinding wheel parameters on the meshing performance of toroidal surface enveloping conical worm drive

Meshing theory and tooth profile geometry of toroidal surface enveloping conical worm drive

A generalized meshing analysis method and its application to toroidal surface enveloping conical worm drive

Manufacturing Principle and Meshing Limit Line of Toroidal Surface Enveloping Cylindrical Worm Drive with Arc-Toothed Worm

Meshing theory of toroidal surface enveloping cylindrical worm drive with arc-toothed worm

Meshing analysis and technological parameters selection of dual tori double-enveloping toroidal worm drive

Meshing analysis of mismatch toroidal worm gearing characterized by different basic parameters of hob and worm

Study on the toroidal helix and manufacturing method of enveloping hourglass worm tooth surface

Meshing principle and geometry of tooth profile for offset enveloping cylindrical worm drive

Grinding worm wear evaluation and its influence on gear surface topography in continuous generating gear grinding

Meshing Characteristic of Arc-Toothed Cylindrical Worm Pair and Cutting Geometric Condition of Its Worm

Meshing limit line of the conical surface enveloping conical worm pair

Geometric Modeling and Meshing Characteristics of the Toroidal Drive

An approximate design method of grinding worm with variable meshing angle and grinding experiments of face gear

Mathematical modeling and forming method of rake face of toroidal worm gear hob based on conical production surface

Meshing principle of conical surface enveloping spiroid drive

Pitch Cone Design and Avoidance of Contact Envelope and Tooth Undercutting for Conical Worm Gear Drives

Curvature interference characteristic of conical worm gear