Abstract:Soda ash (Na2CO3) is produced using the traditional Solvay process. It entails the reaction of CO2 with high-salinity water in the presence of ammonia (NH3), which produces insoluble sodium bicarbonate (NaHCO3) and soluble ammonium chloride (NH4Cl). In the current work, a newly combined approach has been developed to effectively manage the removal of ammonia and sulfate from the effluent of the Solvay process. The devised technique centers on an electrochemical coagulation process, complemented with the utilization of calcium oxide (CaO) as a buffering reagent. This innovative approach excels at achieving high recovery rates for both ammonia and sulfate. The recovered ammonia holds the potential for recycling, thereby contributing to the sustainability of the Solvay process by reusing ammonia in its initial stages. Furthermore, sulfate ions are recuperated in the form of calcium sulfate, a value-added product boasting various industrial applications. The results gleaned from this study underscore the efficacy of the ammonia recovery process, particularly when operating at elevated current densities and with higher calcium oxide concentrations. On the other hand, sulfate recovery demonstrates superior performance when exposed to moderate current densities and limited calcium oxide concentrations. Consequently, the integration of both stages within a single, cohesive process necessitates the development of an optimization methodology to cater to varying operational conditions. To address this need, second-order polynomial equations were formulated and employed to anticipate ammonia and sulfate removal rates in the integrated approach. Four independent variables come into play: calcium oxide concentration, current density, temperature, and mixing rate. The findings reveal that most of these variables exert substantial influences on both ammonia and sulfate removal rates, underscoring the need for careful consideration and fine-tuning to optimize the overall process. The maximum ammonia and sulfate removal were found to reach 99.50% and 96.03%, respectively, at a calcium oxide concentration of 3.5 g/100 mL, a current density of 19.95 mA/cm2, a temperature of 35 °C, and a mixing rate of 0.76 R/s. The results are promising, and the developed process is also suitable for recovering high concentrations of sulfate and ammonia from various wastewater sources.

Industrial Manufacturing of Aqueous Solutions of Sodium Sulfhydrate (NaHS 43%) in a Multi-Phase Reactor

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Hybrid Nanofiltration–membrane Crystallization System for the Treatment of Sulfate Wastes

H2 Reduction of Na2SO4 to Na2S Based on Dilute-Phase Fluidization

A green process for producing Na2S from waste Na2SO4 through hydrogen agglomerate fluidized bed reduction of BaSO4

Innovative process for sulphur recovery from waste incineration flue gases: production of marketable sodium bisulphite solution

Valorization of sodium sulfate waste to potassium sulfate fertilizer: experimental studies, process modeling, and optimization

Thermodynamically Favorable Conversion of Hydrogen Sulfide into Valuable Products through Reaction with Sodium Naphthalenide

The recovery of sulfur as ZnS particles from sulfide-contained wastewater using fluidized bed homogeneous crystallization technology

Direct transformation of calcium sulfite to α-calcium sulfate hemihydrate in a concentrated Ca–Mg–Mn chloride solution under atmospheric pressure

Removal of Sulfur Dioxide from Flue Gas Using the Sludge Sodium Humate

Evaluation of a Combined Approach for Sulfate and Ammonia Recovery from Treated Brine Using a Simultaneous Chemical Precipitation and Electrocoagulation Processes

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

Continuous Sulfonation of Hexadecylbenzene in a Microreactor

Removal of SO2 from Flue Gas by Sodium Humate Solution

Removal of So2 by A Mixture of Caprolactam Tetrabutyl Ammonium Bromide Ionic Liquid and Sodium Humate Solution

Automated thermal design of reactor for producing sulfur-containing sorbent in heating reaction mixture

Rational Formulation Design and Commercial Application of A New Hybrid Solvent for Selectively Removing H2s and Organosulfurs from Sour Natural Gas

Enhanced Reduction of Smelting Gypsum by H2S and In-Situ DRIFTs Investigated on the Mechanisms of S-O Bond Activation

Efficient Synthesis of Dodecylbenzene Sulfonic Acid in Microreaction Systems

Biooxidation of hydrogen sulfide to sulfur by moderate thermophilic acidophilic bacteria