Abstract:Climate change issues and acid rain episodes have triggered new research directions and the conceptualization of new preventive approaches to reduce toxic gases from entering the environment. The reduction of carbon dioxide (CO2) levels in the indoor environment are also one of the challenging human safety issues during emergency incidents and rescues; for instance, a building fire. The use of an activated carbon fiber (ACF) based mask is not only effective to filter CO2 but it is also practically easy to use during such demanding situations. Such modified adsorbents will have high adsorption volume, fast adsorption rates and good thermal, acid and alkaline resistance properties. For the emergency mode considering fires, the major task is atmospheric recovery. Thus, CO2 concentration in the post-fire smoke could be high. The smoke in the room causes suffocations and unconsciousness leading to fatal injuries. In this study, ACF was modified using copper nitrate trihydrate [Cu (NO3)2 .3H2O] by impregnation and carbonization (450°C), followed by its characterization. The modified ACF (Cu-ACF-12) showed large surface area (1147m2 g−1), high micropore volume (0.45cm3 g−1) and an average pore size of 1.57nm. CO2 removal tests were carried out in a lab scale fixed bed adsorption column using the modified ACF. The process parameters were optimized based on a Box-Behnken Design (BBD) and tested in the following ranges: gas flow rate – 150–250mlmin−1, moisture content – 0–40% and modification of the ACF impregnated with copper (Cu) – 4–12wt.%. The experimental results were statistically interpreted to elucidate the main and interaction effects. The modification of ACF showed positive effects on CO2 removal, while gas flow rate and moisture content decreased the CO2 removal. Under the optimal conditions, (gas flow rate – 150mlmin−1, moisture content – 0% and modification of the ACF – 8%), CO2 removal capacity of 2.31mmol of CO2 g−1 Cu-ACF was obtained.

The effect of pre-swelling on the characteristics of obtained activated carbon from cigarette butts fibers

Utilization of cigarette butt waste as functional carbon precursor for supercapacitors and adsorbents

Superhigh selective capture of volatile organic compounds exploiting cigarette butts-derived engineering carbonaceous adsorbent

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Aging effect on the adsorption behavior of microfibers obtained from cigarette butts in aqueous solutions

Preparation of discarded cigarette butt-derived activated carbon and its decolorization for waste edible oils

Recent progress on carbonaceous materials-based adsorbents derived from cigarette wastes for sustainable remediation of aquatic pollutants: A review

Preparation and Characterization of Activated Carbon Fiber (ACF) from Cotton Woven Waste

Activated carbon prepared by co-pyrolysis of waste tobacco straw and waste LDPE mulch film: characterization and application for methylene blue removal

Enhanced adsorption of cationic and anionic dyes using cigarette butt-based adsorbents: Insights into mechanism, kinetics, isotherms, and thermodynamics

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal

Activated carbon fibers from recycled acrylic and cotton for carbon dioxide capture

Production and Characterization of High Quality Activated Carbon from Oily Sludge

Production and characterization of activated carbons from asphaltene by carbon dioxide and steam for ibuprofen adsorption

Boosting the adsorption capacity of activated carbon prepared from Amygdalus communis shells using physicochemical co-activation method

The effect of pretreatment on the adsorption efficiency of activated carbon

Activated carbon fibers via reductive carbonization of cellulosic biomass for adsorption of nonpolar volatile organic compounds