Abstract:Significant endeavours have been undertaken to advance the development of eco-friendly, abundant, cost-effective, and high-performance cathode materials for lithium-ion batteries. Among the various contenders for next-generation energy storage systems, spinel LiNi 0.5 Mn 1.5 O 4 has emerged as a leading high-voltage cathode candidate, owing to its aforementioned benefits. Nonetheless, the widespread adoption of LNMO-based lithium-ion batteries is substantially impeded by the electrochemical instability of conventional carbonate electrolytes above 4.5 V. High-voltage cycling of such batteries results in rapid capacity degradation and metal-ion dissolution from the LNMO electrode into the electrolyte, particularly at elevated temperatures, further causing deposition of metal-ions on anode electrode. Therefore, stabilizing the electrode/electrolyte interface is crucial to achieve improved electrochemical performance of the Li-ion cell at high voltages. The utilization of sacrificial electrolyte additives is regarded as a straightforward and efficacious method to accomplish this objective. These additives form a protective layer on the cathode surface, mitigating electrolyte decomposition and transition metal-ion dissolution and deposition on anode’s surface. Various additives facilitating high-voltage cathode materials have been documented, encompassing fluorides and sulfonates. However, borate salt-containing additives are particularly promising within this context. In the present study, we endeavour to elucidate the surface modifications transpiring on the electrode’s surface when minute quantities of borate-based salt are employed as an additive in the conventional EC:EMC electrolyte for high-voltage operation. We explored the impact of the additive salt in a standard LiPF 6 -EC/EMC base electrolyte on the discharge capacity and rate performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite based Li-ion cell. The electrochemical behaviour, morphological behaviour, and electrode-electrolyte interphase layer stability on the electrode were meticulously examined using high-resolution transmission electron microscopy (HR-TEM), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). These characterisations conformed the presence of an electrode-electrolyte interface forming a thin-layer via the sacrificial decomposition of the utilised additive. The introduction of this salt exhibits favourable effects on enhancing the electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite in high-voltage lithium-ion batteries. Notably, the utilised additive excels in mitigating irreversible capacity loss and reducing cycling fade, as it preferentially decomposes and forms a conductive, protective film that impedes subsequent electrolyte decomposition, thereby substantially enhancing cell performance.

New insight into the mechanism of LiPO2F2 on the interface of high-voltage cathode LiNi0.5Mn1.5O4 with truncated octahedral structure

LiPO2F2 electrolyte additive for high-performance Li-rich cathode material

Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

Lithium Difluorophosphate As a Promising Electrolyte Lithium Additive for High-Voltage Lithium-Ion Batteries

Lithium difluorophosphate as a multi-functional electrolyte additive for 4.4 V LiNi0.5Co0.2Mn0.3O2/graphite lithium ion batteries

Tracing the Impact of Hybrid Functional Additives on a High-Voltage (5 V-class) SiOx-C/LiNi0.5Mn1.5O4 Li-Ion Battery System

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Additive Engineering for Robust Interphases to Stabilize High-Ni Layered Structures at Ultra-High Voltage of 4.8 V

Functionality Selection Principle for High Voltage Lithium-ion Battery Electrolyte Additives

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

Enhanced Aluminium Passivation properties of lithium nonafluoro-tert-butoxide: Designing Electrolyte Additives for High-Voltage 4.8 V LiNi0.5Mn1.5O4-graphite batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Synchronous dual additives to boost multiphase interface stability of high-voltage Li-rich Mn-based batteries

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries.

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Interface Modifications by Anion Receptors for High Energy Lithium Ion Batteries

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries