Abstract:A network polymer at its gel point is in a critical state between liquid and solid. Linear viscoelasticity reduces to a simple behavior which is described by the gel equation for the stress (J. Rheol., 30, 367 (1986) and 31, 683 (1987)):$$ \tau (\rm{t}) = \int_{ - \infty }^{\rm{t}} {{\rm{S}}\quad {{({\rm{t}} - {\rm{t'}})}^{ - {\rm{n}}}}} \dot{\gamma} ({\rm{t'}}){\rm{dt}}$$in which the strain history is defined by the rate of deformation tensor$$ \dot{\gamma} ({\rm{t'}})$$. Molecular parameters determine the gel strength, S, and the relaxation exponent, n. The above power law relaxation behavior seems to be a universal property at the gel point. It has been found with a large variety of chemically or physically crosslinking polymers, i.e. with all crosslinking polymers which we studied above the glass transition temperature. Initially, we seemed to find a universal relaxation exponent of 0.5 for all gels as it might be expected for a critical state. However, measured values between 0.15 and 0.8 indicate that the relaxation exponent may cover the entire range between 0 and 1. The front factor S depends on the magnitude of the relaxation exponent, and for classes of network polymers it is found to follow the relation S=Goλon, where Go and λo are characteristic properties which are constant within each class of network polymers (to appear in Macromolecules, 1990). Go is of the order of the plateau modulus of the network and λo is believed to be the relaxation time of a network strand. The universality of the power law relaxation behavior of polymers at the gel point allows a most accurate determination of the instant of gelation (Polym. Eng. Sci., 27,1698 (1987)). The gel point is reached when the complex rheological behavior reduces to power law relaxation in the terminal frequency range (fractal behavior, mechanical selfsimilarity). The simple technique of Fourier Transform Mechanical Spectroscopy (J. Non-Newt. Fluid Mech., 27, 17 (1988)) not only allows the direct determination of the gel point. It also allows, by extrapolation, to predict the distance from the gel point in a sol. Recent advances of the technique and a set of applications will be given. When replacing the rate of deformation tensor in the gel equation with a suitable strain measure, it can predict the stress in critical gels up to about 2 strain units (for PDMS). Beyond this, a large strain will irreversibly rupture the molecular network.

Gel point determination of a thermoset prepreg by means of rheology

A new approach for determination of gel time of a glass/epoxy prepreg

A comparison of gel point for a glass/epoxy composite and a neat epoxy material during isothermal curing

Glass Transition in Gels

Exploring Gel-Point Identification in Epoxy Resin Using Rheology and Unsupervised Learning

Rheology of Polymer Gels

Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

Determination of the Gel Point of Formaldehyde-Based Wood Adhesives by Using a Multiwave Technique

Determination of gel point and completion of curing in a single fiber/polymer composite

Comparison of Dynamic Light Scattering and Rheometrical Methods to Determine the Gel Point of a Radically Polymerized Hydrogel under Mechanical Shear

Rheological cure characterization of an advanced functional polyurethane

Rheological Study of the Sol-Gel Transition of Hybrid Gels

Microrheological approach for the viscoelastic response of gels

In Situ Monitoring of the Curing of a Bisphenol-A Epoxy Resin by Raman-Spectroscopy and Rheology

Gel point determination for the copolymerization system of cardanyl acrylate and styrene and its critical conversion

Determination of the melting point of solid polymers by rheological method

Thermo-rheological and kinetic characterization and modeling of an epoxy vitrimer based on polyimine exchange

Hot melt thermoset/thermoplastic hybrid prepregs: Effects of B‐stage conditions on the quality of composite parts

Gelation Behavior of Thermoplastic-Modified Epoxy Systems During Polymerization-Induced Phase Separation

Double Resonance Method for Determination of Gel Point

Gelation of PU elastomers: rheological characterization for liquid additive manufacturing