Abstract:Sugar beet pulp polyol‐based rigid polyurethane foam composites as environmentally‐friendly insulation material. The building and construction industry is under increasing pressure to make insulation materials greener, more sustainable, and less flammable. In this study, sugar beet pulp was liquified under the optimized liquefaction conditions and used as the source of bio‐polyol (SBpol) in the production of bio‐based rigid polyurethane foam (sPUF). In order to improve the flame retardancy, sPUF composites were prepared with the addition of flame retardants; expandable graphite (EG) and/or dimethyl methyl phosphonate (DMMP). The bio‐polyol was used at a fixed ratio of 50 php in sPUF composites whereas the total ratio of flame retardants was fixed at 20 php. The effects of the ratio of EG and/or DMMP on the morphological, physicomechanical, thermal, and flame retardant properties of sPUF composites were evaluated. Although the thermal conductivity values of flame retardant added sPUF composites were increased in comparison to the petroleum‐based foam, the compressive strength values were decreased as the amount of DMMP increased in the flame retardant formulation. Thermogravimetric analysis showed that the onset of decomposition of 20 php DMMP‐containing sPUF composite decreased to 168.3°C. Although the limiting oxygen index (LOI) value of the petroleum‐based PUF was as low as 19.7%, the LOI value of the sPUF/10E/10D foam increased to 24.9% (by about 26%). According to the cone calorimeter results, the peak heat release rate (pHRR) of sPUF was much higher than the petroleum‐based foam. The incorporation of both DMMP and EG could further improve the flame retardant properties. The pHRR value of sPUF/10E/10D was 28.1% lower than that of sPUF. The results have shown that flame retardancy of sPUF composites could be improved by the addition of EG which acts in the condensed phase and DMMP, which acts mainly in the gas phase during burning. Flame retardant incorporated sPUF composites are considered as promising materials for use in insulation applications.

Investigation on flammability of rigid polyurethane foam‐mineral fillers composite

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effects of Inorganic Fillers on the Flame‐retardant and Mechanical Properties of Rigid Polyurethane Foams

Flame Retardancy and Thermal Stability of Rigid Polyurethane Foams Filled with Walnut Shells and Mineral Fillers

Harnessing Enhanced Flame Retardancy in Rigid Polyurethane Composite Foams through Hemp Seed Oil-Derived Natural Fillers

Investigation on the influence of waste-based fillers on the mechanical and thermal characteristics of rigid polyurethane foams

Understanding the Flame Retardant Mechanism of Intumescent Flame Retardant on Improving the Fire Safety of Rigid Polyurethane Foam

Bio-Based Trivalent Phytate: A Novel Strategy for Enhancing Fire Performance of Rigid Polyurethane Foam Composites

Fumed nanosilica as filler for semi-rigid palm oil-based polyurethane foam: Mechanical, material, thermal, and fire response

Thermal Stability and Flame Retardancy of Rigid Polyurethane Foams/Organoclay Nanocomposites

Flame retardant rigid polyurethane foam composites based on microencapsulated ammonium polyphosphate and microencapsulated expanded graphite

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

Thermal Stability and Flame Retardancy of Rigid Polyurethane Foam Composites Filled with Phase-Change Microcapsule

Bio‐based rigid polyurethane foam composites reinforced with flame retardants: From synthesis to performance evaluation

Structure and Flame-Retardant Actions of Rigid Polyurethane Foams with Expandable Graphite.

Influence of Aluminum Hydroxide and Expandable Graphite on the Flammability of Polyisocyanurate-Polyurethane Foams

Fabrication of green montmorillonite modified bio-based rigid polyurethane foam with improved flame retardancy and enhanced mechanical properties

Highly Efficient Flame Retardancy and Fire Spread Behavior of Rigid Polyurethane Foams with extremely low content of Flame Retardant

Flammability, Toxicity, and Microbiological Properties of Polyurethane Flexible Foams

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams