Abstract:An ab-initio microkinetic model (MKM) was developed to understand the reactivity trend in transitional metal catalysts which are often used for non-oxidative conversion of alcohols to produce aldehydes. The MKM utilized ethanol reaction on the step sites of the catalyst, to calculate the turnover frequency (TOFs) for the production of acetaldehyde at 423 K. At these conditions, Cu showed the highest activity (TOF ~ 102 s−1), followed by Pt (TOF ~ 101 s−1). This explains why Cu, being the cheaper metal, is the ‘catalyst of choice’ for this reaction. Pd was the other most active (TOF ~ 10− 1 s− 1) catalyst, however, its activity was lesser than that of Cu and Pt. Rest of the metals screened (Co, Ni, Ag, Au, Rh, Ru, Re) showed low or negligible conversion for this reaction at 423 K. Interestingly, in the non-oxidative environment, the three most reactive metals (Cu, Pt and Pd) were also selective towards acetaldehyde production. At a higher temperature (473 K) and assuming around 10% conversion over the length of a packed-bed reactor, an appreciable TOF (~ 10− 2 s− 1) towards the aldehyde was calculated for other metals such as Co, Ni, Ag and Au. While Pt was the most active catalyst (TOF ~ 104 s−1), the TOF on Cu remained high (TOF ~ 103 s−1), to yield the desired aldehyde product. The trend in calculated TOF at 473 K followed the order; Pt > Cu > Pd > Co > Ni > Ag > Au > Rh > Ru > Re. Out of all the metals studied only Ag and Au were found to be selective towards ethylene, rest other metals were selective towards the aldehyde product. The surface of most of the metal catalysts (Pt, Pd, Co, Ni, Rh, Ru, Re) was covered with the intermediate CH3CO at both the temperatures (423 K and 473 K) studied. In contrast, only the surface of Cu was covered with the intermediate CH3CH2O, suggesting difficult C–H bond activation on Cu. Motivated from this monometallic reactivity trend, surface design of bimetallic alloys, based on Cu were explored for this reaction. Alloying Cu with a metal commonly used for C–H bond activation (such as Ni, Pd, Pt, Rh) was calculated to show high reactivity (TOF > 103 s−1) for the aldehyde production. Following a similar rationale, one may think of tuning the reactivity of Ni itself by allowing the reaction to stop at CH3CHO, before undergoing further C–H bond activation. We suggest Ni alloying with Sn for moderating the surface catalytic activity of Ni, which was calculated to show high TOF (> 103 s−1) for this reaction.Graphical Abstract

Rational design of selective metal catalysts for alcohol amination with ammonia

The Acquisition of Primary Amines from Alcohols Through Reductive Amination over Heterogeneous Catalysts

A comprehensive study on the reductive amination of 5‐hydroxymethylfurfural into 2,5‐bisaminomethylfuran over Raney Ni through DFT calculations

Structure-Sensitive and Insensitive Reactions in Alcohol Amination over Nonsupported Ru Nanoparticles

General Synthesis of Alkyl Amines via Borrowing Hydrogen and Reductive Amination

Rational Design Synergistic Metal-Free Dual-Atom Electrocatalyst for N2 to NH3 Reaction on G-Cn: A First Principle Study

A Ru@Zeolite Catalyst for Highly Selective Synthesis of Primary Amines from Alcohol Amination

Atomic-Level Asymmetric Tuning of the Co1-N3P1 Catalyst for Highly Efficient N-Alkylation of Amines with Alcohols.

Intrinsic mechanism of active metal dependent primary amine selectivity in the reductive amination of carbonyl compounds

Highly Selective Synergistic N-Alkylation of Amines with ROH Catalyzed by Nickel–Ruthenium

Atomic-Level Asymmetric Tuning of the Co 1 -N 3 P 1 Catalyst for Highly Efficient N -Alkylation of Amines with Alcohols

First-Principle Microkinetic Modeling of Ethanol Dehydrogenation on Metal Catalyst Surfaces in Non-oxidative Environment: Design of Bimetallic Alloys

Mechanistic insights into the origins of selectivity in a Cu-catalyzed C–H amidation reaction

Theoretical Design Principles of Metal Catalysts for Selective Ammonia Oxidation from High Throughput Computation

Insight into the roles of ammonia during direct alcohol amination over supported Ru catalysts

Selectivity Control in Catalytic Reductive Amination of Furfural to Furfurylamine on Supported Catalysts

Paving the Way for Reductive Amination: Boosting Catalytic Ammonolysis of Schiff Base

Boosting Amination of 1‐octanol to 1‐octylamine Via Metal‐Metal Oxide Interactions in NixFe1/Al2O3 Catalysts

Mechanistic insights to drive catalytic hydrogenation of formamide intermediates to methanol via deaminative hydrogenation

Co‐Catalyzed Synthesis of Primary Amines via Reductive Amination employing Hydrogen under very mild Conditions

Sterically Controllable Adsorption on Nickel Surface for Selective Reductive Amination