Abstract:This research presents a cost-effective surveying methodology to assist the seismic assessment of complex heritage buildings, based on terrestrial structure-from-motion (SfM) photogrammetry. The method was applied to the study of the seismic performance of the church of San Juan Bautista – Inca temple of Huaytará, Peru, an emblematic case study due to its complex architecture and coexistence of different construction materials. The geometrical model for the seismic assessment was developed with an error of less than 2 % using SfM photogrammetry. Non-linear static pushover analyses were performed on 3D FEM models of the nave and the towers to evaluate their individual response under seismic loading. Mechanical properties of different structural materials of the church were evaluated based on laboratory experimental tests on mortar and adobe, contemporary and ancient fired brick, Inca stone, colonial stone and rubble stone units. Non-linear pushover analyses were conducted in four directions perpendicular to the perimeter walls, and the response of the structure was compared with the seismic demand specified in Peruvian Standards. The simulations show that damage-prone areas are the western and eastern facades, with cracking at the connections between orthogonal walls, as well as at the interface of adobe masonry with Inca stone masonry. The towers exhibit similar seismic response, with lower strength capacities compared to the main nave. In this case, flexural overturning mechanisms and cracking at the interface between stone and adobe masonry were observed. The displacement-based seismic assessment using the N2 method shows that a peak ground acceleration of 0.21 g could lead to the collapse of the north and south facades of the main nave. The towers showed a much smaller capacity with PGA leading to collapse of approximately 0.09 g. Overall, this study contributes to the understanding of the seismic performance of the Huaytará-Huancavelica church, highlighting vulnerabilities and providing valuable information for its preservation and future interventions. Future investigations should focus on on-site tests that will allow the estimation of the effect of existing damage on the structural response and their incorporation in the numerical model.

A Multi-Disciplinary Approach to the Seismic Assessment of the National Palace of Sintra

Seismic Vulnerability Assessment of Historical Centers at Urban Scale

BIM as a resource in heritage management: An application for the National Palace of Sintra, Portugal

Preservation and Protection of Cultural Heritage: Vibration Monitoring and Seismic Vulnerability of the Ruins of Carmo Convent (Lisbon)

Is the use of traditional seismic strengthening strategies economically attractive in the renovation of urban cultural heritage assets in Portugal?

Seismic performance and fragility curves of historical residential buildings in Lisbon downtown affected by settlements

Multi-attribute-based procedure for seismic loss scenario in a historical area

Seismic Scenario Losses Estimation Based on the Vulnerability of Pre-Code Masonry Buildings in the Metropolitan Area of Lisbon

Efficiency and Cost-Benefit Analysis of Seismic Strengthening Techniques for Old Residential Buildings in Lisbon

3D MODELING AND VISUALIZATION OF ARCHITECTURE AND LANDSCAPE

A Case Study of the Lisbon Agricultural Exhibition Pavilion

A Scan-to-BIM Methodology Applied to Heritage Buildings

Integrated Building Modelling Using Geomatics and GPR Techniques for Cultural Heritage Preservation: A Case Study of the Charles V Pavilion in Seville (Spain)

Sensor Placement Strategies for the Seismic Monitoring of Complex Vaulted Structures of the Modern Architectural Heritage

Tower of Belém (Lisbon)-Status Quo 3D Documentation and Material Origin Determination

Structural health monitoring of the retrofitting process, characterization and reliability analysis of a masonry heritage construction

Photogrammetry-aided numerical seismic assessment of historical structures composed of adobe, stone and brick masonry. Application to the San Juan Bautista Church built on the Inca temple of Huaytará, Peru

Seismic numerical analysis of an Inca stone wall in Sacsayhuaman using rigid body dynamics within a finite element framework

Integrated ultrasonic, laser scanning and petrographical characterisation of carbonate building materials on an architectural structure of a historic building

A framework for multi-risk assessment in a historical area of Lisbon

Synergistic application of operational modal analysis and ambient noise deconvolution interferometry for structural and damage identification in historic masonry structures: three case studies of Italian architectural heritage