Abstract:Approximately 20,000 people are killed annually on average by building and infrastructure collapses and failures caused by seismic activities. In earlier times, seismic design codes and specifications set minimal requirements for life safety performance levels. Earthquakes can be thought of as recurring events in seismically active areas, with severity states ranging from serviceability to ultimate levels. Buildings designed in accordance with site-specific response spectra, which take into account soil properties based on ground motion amplification data, are better at withstanding such forces and serving their design purposes. This study aims to investigate the site response of reinforced and masonry buildings, considering the effect of soil properties based on the amplification of ground motion data, and to compare the life cycle assessment of the buildings under consideration based on the design and the site-specific response spectrum. In terms of soil properties and site-specific response spectra, STRATA is used to determine the site-specific response for the considered locations for a return period of 475 years for 100 realizations based on the randomization of site properties. For structural analysis, AxisVM software, which is a compatible finite element analysis, is used for building design and analysis, generating comparative results based on the design- and site-specific spectra. To determine and identify potential failures in the model, response spectra were applied to understand the difference in horizontal deflection in two different instances (for elastic design- and site-specific spectra). After building design and analysis is performed, a life cycle analysis in terms of environmental impact assesments using OpenLCA and IdematLightLCA is done. This is done to ascertain the additional expenses in terms of ecocosts and carbon footprints on some failed elements in the structure which are required to make the buildings more resilient when the site-specific response spectrum is applied and to compare the potential economic losses that may occur based on ecological costs. The study presents a comprehensive investigation into the seismic response of masonry and reinforced concrete buildings in Győr, Hungary, incorporating advanced geophysical techniques like multichannel surface wave (MASW) and structural analysis software, AxisVM. Additionally, tailored retrofitting strategies are explored to enhance structural resilience in seismic-prone regions. Significant ground amplifications in soil properties across different profiles are revealed, emphasizing the effectiveness of these strategies in reducing structural deflection and improving resilience. Highlights of the results are observed where the site-specific response spectra are higher than the EC8 design response spectrum. Furthermore, the research underscores the substantial environmental impact, considering both ecocosts and CO2 emissions associated with retrofitting measures, highlighting the importance of sustainable structural interventions in mitigating seismic risks.

Efficiency and Cost-Benefit Analysis of Seismic Strengthening Techniques for Old Residential Buildings in Lisbon

Seismic Vulnerability Assessment of Historical Centers at Urban Scale

Is the use of traditional seismic strengthening strategies economically attractive in the renovation of urban cultural heritage assets in Portugal?

Seismic Scenario Losses Estimation Based on the Vulnerability of Pre-Code Masonry Buildings in the Metropolitan Area of Lisbon

Seismic performance and fragility curves of historical residential buildings in Lisbon downtown affected by settlements

Analysis of the impact of large scale seismic retrofitting strategies through the application of a vulnerability-based approach on traditional masonry buildings

Multi-attribute-based procedure for seismic loss scenario in a historical area

A Multi-Disciplinary Approach to the Seismic Assessment of the National Palace of Sintra

Understanding the Impact of Seismic Hazard and Climate Conditions on Multi Criteria–Based Retrofitting of Existing Buildings

Recent Advances on Analysis Methods and Modelling Approaches for Seismic Assessment and Design of Infilled RC Buildings

Investigation of the characteristics of Portuguese regular moment-frame RC buildings and development of a vulnerability model

Definition of fragility curves through nonlinear static analyses: procedure and application to a mixed masonry-RC building stock

Assessment of Multi-Criteria Evaluation Procedures for Identification of Optimal Seismic Retrofitting Strategies for Existing RC Buildings

Specific seismic retrofitting of a compact reinforced concrete building with X-bracings and steel jackets. Application to a primary school in Huelva

The strong influence of small construction errors on sound insulation of buildings with heavyweight concrete structure: A Portuguese case study

Exposure and physical vulnerability indicators to assess seismic risk in urban areas: a step towards a multi-hazard risk analysis

Enhancing Seismic Performance: A Comprehensive Study on Masonry and Reinforced Concrete Structures Considering Soil Properties and Environmental Impact Assessment

Seismic Retrofit of Pilotis Buildings by Novel Aluminium Buckling-Restrained Braces (Al-BRBs). Application to a Modernist Architecture Building in Lisbon

Performance based probabilistic seismic risk assessment for urban heritage. An example in Pla del Remei Area (Valencia)

SIMULATING TO EVALUATE, MANAGE AND IMPROVE EARTHQUAKE RESILIENCE IN HISTORICAL CITY CENTERS: APPLICATION TO AN EMERGENCY SIMULATION-BASED METHOD TO THE HISTORIC CENTRE OF COIMBRA

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application