DISPLACEMENT–BASED SEISMIC DESIGN OF SKEW RC BRIDGE PIERS

AYMAN HUSSEIN HOSNY KHALIL,SHEHAB MOURAD,MOHAMED NOUR FAYED,MOHAMED ABDEL AZIZ,AYMAN KHALIL,MOHAMED FAYED

DOI: https://doi.org/10.21608/iccae.2008.45505

2008-05-01

The International Conference on Civil and Architecture Engineering

Abstract:Current bridge codes and standards apply ordinary bridge seismic design proceduresto skew bridges neglecting the torsional and bilateral effects during the seismicexcitations. As a result, there is a need to investigate the seismic behaviour of skewbridge piers. This paper highlights the important features of displacement basedseismic design. Then, it provides the details and the results of a theoreticalparametric study to assess the seismic performance of skew bridge’s piers. Thetheoretical study parameters are the skew angle, the pier height to thickness ratio,and the vertical reinforcement ratio. A commercial nonlinear finite element softwarepackage, Strand 7, was used in the analysis. A force controlled pushover analysiswith triangular load pattern was applied to push pier models. The performancerelationships of secant stiffness, length of the formed plastic hinge, and displacementductility to pier geometry, and vertical reinforcement ratio were developed for skewbridge’s piers. Results show that displacement ductility for skewed piers is verysensitive to the variation of the skew angle at low skew angles especially for lowvertical reinforcement ratio. Further, the displacement ductility is reduced as theamount of vertical reinforcement increased with the confining reinforcement ratiobeing constant. It was also shown that the effect of skew angle becomes less significant for small skew angles and for short piers. Finally, the secant stiffnesschanged significantly with skew angle variation for short piers.